1967

Battery cable for negative post. Cable is flat, braided, unsheathed and a 4 gauge with 17/64" and 11/32" hole sizes on heat shielded terminal ends. Fits:XLH 1967-1972Additional Information <

Battery cable is 6 gauge with 13/32" and 11/32" hole sizes on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shielded terminal ends. Use for ground post. Fits:FL...

Black battery cable is 8 gauge with 17/16" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to battery...

Starter is 1.4kW unit that generates more power and shaft speed than the original type 0.8kW starter.Starter includes housing to mount to 1965-1978 Big Twin. Unit is Presolite high output type...

Regulator ground wire is battery box to ground type. Fits:FL 1965-1969Additional Information OEM No.70165-58 U

Zinc plated clamp is for automatic advance distributors. This is a single stud mount clamp for flanged mounts. Fits:FL 1966-1969Additional Information OEM No.

V-Fire completed electronic distributor assembly includes distributor body and shaft with reverse tooth gear, single fire electronic ignition unit, sensor cup, wire and hold down clamp.Distributor...

Auxiliary seat spring frame cross stud with spacer. Fits:FL 1958-1984Additional Information OEM No.52605-65 UO

Auxiliary zinc seat spring kit with chrome springs, brackets, nut set, and buddy seat spring bar.Kit adapts to all plunger mounted buddy seats for extra weight capacity. Fits:FL 1965-1984Additional...

Auxiliary seat spring yokesSold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52596-65

Auxiliary seat spring bracket catch set.Sold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52586-68

Auxiliary buddy seat spring bar. Fits:FL 1965-1984Additional Information OEM No.52566-65 UOM1 - EA

Auxiliary spring buddy seat bracket set. Fits:FL 1965-1984Additional Information OEM No.52583-68 UOM1

Zinc windshield extension bracket set.Sold as a set of two. Fits:FLH 1960-1984Additional Information OEM No.58107-60

Zinc windshield mounting bracket set includes right and leftSold in a quantity of 2. Fits:FLH 1949-1984Additional Information OEM No.58095-49<

Chrome 9" rear mount bar for rear turn signals.The distance between the mounting holes measures 5-3/16" center to center. Fits:FL 1963-1973Additional Information

Zinc plated carburetor upper and lower support bracket with hardware kit is for fitting a CV carburetor to a 1948-1985 Big Twin motor. Kit is used to mount motor case bolt between cylinders.This 2...

Steel fork boot retainer washer for XL models.Sold in a quantity of 2. Fits:XL 1957-1970Additional Information OEM No.46010-54

Exhaust clamp kit is for two into one single exhaust. Front pipe clamp set has parkerized finish and muffler hanger clamp and inlet clamp have brushed stainless finish.Order bolt seats separately...

Exhaust clamp kit is for two into one single exhaust. Front pipe clamp set is chrome plated and muffler hanger clamp and inlet clamp are brushed stainless finish.Order bolt sets separately. Fits:FL...

Zinc horn bracket for left side Fits:XL 1952-1984Additional Information OEM No.69031-57 UOM1 - EA

Includes seat plunger kit, seat "T", and pivot bolt. Fits:XL 1954-1970Additional Information UOM1 - KIT Manufa

Black seat bracket kit includes seat bracket, right and left bracket. Fits:FXE 1966-1984FLH 1958-1984FXR 1982-1983FX 1966-1984FL 1958-1984FX 1980-1984Additional Information

V-Twin - 31-4057 - Exhaust Bracket ChromeDescriptionChrome exhaust bracket is for mounting drag pipes on mufflers with the use of T bolts.Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits...

Solo seat hardware mount kit includes nose brackets, springs and rear bracketsUse mount kit for smaller type solos such as K or CH types. Fits:XL 1952-1978Additional Information

Black exhaust support tube mounts drag pipes or stock mufflerrs system to 1958-1979 XL-XLH models Fits:XL 1958-1978Additional Information OEM No.65316-65

Chrome top maxi engine mount has a two piece and two bolt construction for secure fastening. Fits:FX 1971-1984FL 1948-1984Additional Information UOM

Solo seat hardware kit includes nose bracket, chrome springs and rear brackets to mount small type solos.Includes a bracket and 2 thick spacers for the use on 1982-1985 FX models.The thick spacers...

Zinc front solo seat mount bracket bolts to frame holes above seat post tube. The seat nose bracket will swivel on this mount.This bracket will also mount to frames with a flat triangular plate at...

Parkerized exhaust clamp set is for front header pipe on two-into-one single exhaust.Order bolt sets separately. Fits:FL 1941-1969FL 1936-1940Additional Information

Black front frame exhaust clamp for 1936-1969. Fits:FL 1958-1969Additional Information OEM No.65512-37A UOM

Distributor breaker hold down clamp. Fits:XL 1952-1970WL 1936-1973Additional Information OEM No.32515-66

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is extra...

Seat bracket set features a black finish and includes a zinc clip. Fits:G 1951-1973FL 1965-1967FL 1968-1984Additional Information UOM1

Zinc plated air cleaner mount bracket. Fits:FL 1966-1972Additional Information OEM No.29027-66 UOM1 -

Black oxide buddy seat spring mount right and left set includes clips to secure bolts in place.Right and left set with slots to accept pins on spring ends when in down position. Fits:FL...

Carburetor support with a zinc finish is for use on OKO and S&S "E" carburetors.For Big Twin models, mounts to center case bolt and carburetor to manifold bolt. Fits:FLST 1985-1999FX 1971-1984FL...

Carburetor support bracket is natural aluminum and measures 5-5/8" center to center. Bracket is used for Shovelhead and EVO applications. Fits:FX 1973-1984FL 1966-1984Additional Information

Steel exhaust repair port is to be welded on broken or damaged heads. Pipe flange is steel and is to repair shovel pipe ends.Sold in a quantity of 2. Fits:FX 1971-1984FL 1966-1984Additional...

Black left side muffler support. Fits:FL 1958-1984Additional Information OEM No.65318-59B UOM1 - EA