1967

Ironhead LAF style header set features a chrome finish.*NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. Fits:XL 1957-1985Additional...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Componenets available separately. For kick and electric start models. Fits:XLCH 1957-1978XLH 1957-1978Additional...

Muffler includes one megaphone tip with heavy duty 1-7/8" clamp installed. Fits:FL 1958-1984Additional Information UOM1 - EA

Black combo exhaust connector pipe has bracket riveted in place as original, and includes 1-3/4" inside diameter "Y" connector.*NOTE: Flat (squash) pipe may require hand fitting. Edge of pipe may...

Chrome 31" muffler kit for use with dual exhaust. Muffler is 31" long with upsweep design. Inlet end fits 1-3/4" outer diameter pipes. Muffler set includes 1-7/8" clamp set, and 3" hanger clamps...

Kit includes two 22" FLH full chrome mufflers and two 15" long megaphone tips with heavy duty 1-7/8" clamps.For use with right and left side dual exhaust! ...

Chrome finish rear heat shield for 2:1 exhaust systems on Shovelheads and Panheads. Does not have the cut out for the crossover pipe.Includes two worm clamps. Heat shield includes 2 worm drive clamps...

Chrome muffler kit includes a single 22" muffler with 15" megaphone muffler tip and one 1-7/8" clamp.For one side. Fits:FL 1958-1984Additional Information U

Replica tubing set is chrome with a 1-7/8" inner diameter. This bendable slinky type tubing fits over 1-3/4" pipes. Constructed of steel.Set includes one 10" cover and one 11-1/2" cover. Sold in a...

Rear chrome heat shield has worm clamps included. Shield has a cutout for crossover pipes. Fits:FL 1965-1969Additional Information OEM No.65560-65A<

Chrome top left heat shield has worm clamps included. Fits:FL 1965-1984Additional Information OEM No.65710-65

Replica chrome header set.Set will accept heat shields. Order clamps and muffler separately. Fits:XLCH 1957-1978XL 1957-1978XLH 1957-1978Additional Information

Panhead rear crossover exhaust pipe features a chrome finish . For use with crossover exhaust systems when used with a rear header pipe with crossover junction.**CAUTION: These exhaust products are...

Chrome rear exhaust pipe for Big Twins with crossovers fits stock systems only.Exhaust pipe will work with kick starter models. **CAUTION: These exhaust products are not...

Aluminum exhaust repair ports are to be welded on broken or damaged heads.Sold in a quantity of 2.

Rear heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65702-68B

Front heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65728-66

Replica chrome dual crossover system without mufflers features inter section of left side crossover at rear pipe.System is for 1966-69 Shovelheads and is for kick or electric start. Four piece system...

Black 2:1 siamese hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames, and features a one piece design for Ironheads only.One piece header will...

Chrome 2:1 hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames. Features a one piece designOne piece header will require the installer to saw out...

2 into 1 exhaust header set is for rigid or swingarm frames on 1966-1969. It is a three piece set incorporating the Y flat pipe combination.Set needs to be powder coated. *Note: UPS may consider this...

Chrome 2 into 1 exhaust header is for rigid or swingarm frames on 1966-1969 models. Header comes as a three piece set incorporating the Y flat pipe combination.*Note: UPS may consider this part as...

Shovelhead front and rear upsweep header pipe set featrues a chrome finish and will accept straight fishtail extensions or mufflers.2 piece header set is for rigid frame installation with nose cone...

Chrome upsweep rear exhaust header for Shovelhead motors in a rigid frames.The channel mount is on the rear side of the header pipes, to attach to the frame with "T" bolts. For use with upsweep...

Shovelhead rigid upsweep exhaust 4 piece header set features a chrome finish. Includes a front upsweep extension header, upswwep rear exhaust header pipe, flat "squash" pipe, and a front cylinder...

Starter crank and kick starter pedal mounting kit with zinc plated finish. Fits:FLH 1941-1967FL 1941-1967Additional Information UOM1 - KIT<

Parkerized starter crank and kick starter pedal mounting kit. Fits:FLH 1941-1967FL 1941-1967Additional Information UOM1 - KIT

Starter solenoid black plunger boot. Fits:FLT 1979-1982XL 1967-1980FL 1965-1982FX 1971-1982Additional Information OEM No.31441

Horn mount rubber stud measures 5/16" and is ISO type with male-male ends. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST 1986-1989Additional Information

Foam pad only for rear fender bracket.Use with bracket to reduce vibration between the fender and the frame. Fits:XL 1954-1978XLCH 1954-1978Additional Information

Brake/clutch pedal pad set is rectangular shaped, with rubber construction, slide into place. Original design from the 1940's. Fits:FL 1941-1984EL 1936-1952Additional Information

Rubber riser bushingSold in a quantity of 2. Fits: FL 1960-1972 FX 1971-1972 K 1954-1956 XL 1957-1972 Additional Information

V-Twin - 28-1997 - Black Solenoid Plunger Rubber BootDescriptionSolenoid plunger boot fits 1965-1988 solenoids. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

V-Twin - 28-1994 - Fork Boot Set BlackDescriptionStock type black fork boot set for XL modelsSold in a quanity of 2. Fits:XL 1954-1970Additional Information

V-Twin - 28-1955 - Rear Master Cylinder Rubber BootDescriptionRear master cylinder boots are sold in an assortment of 5 early and 5 late type. Stock OE replacement. Fits:FL 1958-1978FX...

V-Twin - 28-1949 - Riser Bushing and Washer Kit Description Bushing and rubber washer kit is for upper tree risers.Can be used with 2-1/2" bolt set, available seprately. *NOTE: Features a metal...

Top bushing set Fits: FXD 1991-2005 FXR 1988-1994 XL 1954-1999 Additional Information UOM 1 - KIT

39mm rubber sleeve for 38mm flatslide carburetors. Fits:FX 1971-1984FL 1966-1984XL 1963-1984Additional Information UOM1 - EA

Black rubber fork boot 41mm is designed for a better fit and improved sealing and wiping action.Sold in a quanity of 2. Fits:FL 1949-1976Additional Information

Replica orange handlebar grip seat is 1-1/8" on both sides. Fits:FL 1962-1972XL 1962-1972Additional Information UOM1 - SET