1968

Starter cable set is a 3 piece set.This three piece set includes one 6 gauge battery cable with 13/32" and 11/32" holes sizes and two 8 gauge black battery cablew with 17/16" and 11/32" hole sizes,...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:FL 1965-1985Additional Information UOM1 - KIT

XL 12 volt alternator gear kit includes gear, nut, spacer and deflector washer. Kit is for 32E 12 volt style alternator.Accepts 1/4 or 5/16 mount screws. Fits:XL 1958-1983Additional Information

2.0 kW starter motor includes a 9 tooth starter gear and 6 screw mounting for electric starter kits.Mounts with 6 screws on face. MFG # WW1370. Fits:FL 1958-1985Additional Information

Early 3 way key switch features a die cast body with the off/on/on positions, and includes 2 small early style brass Chicago style brass keys, for XLCH applications.Threaded body has a 3/4" outer...

Chrome alternator bolts on in place of original 12 volt generator. Chome state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor...

Chrome alternator bolts on in place of original 12 volt generator. Includes chrome solid state regulator, gear, gasket and mount screw set.Features high power output, 17 amps @ 1000 rpm. *NOTE: On...

Black alternator bolts on in place of original 12 volt generator. Black solid state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the...

Starter solenoid kit includes a zinc solenoid, plunger assembly kit and an end cover boot. Fits:FL 1965-1984FXST 1987-1988Additional Information UOM

XLH battery cable set includes a black positive/negetive 15-1/2" cable and a braided flat negative 9-1/2" cable.Sold as a set of 2. Fits:XLH 1967-1978Additional Information

Big Twin coil mount with swtich bracket mounts bolts on to existing studs on FL and FX frames but does not accept cover. Mount features a raw finish.Bracket does not accept coil cover. *NOTE: Must...

York electric starter kit. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin

Magneto retard lever set for Burkhardt magnetos. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - SET <

2020 new production replica dimmer switch with cloth covered wires.Switch may be painted if desired. Fits:UL 1937-1948VL 1930-1934FL 1941-1971EL 1936-1940WL 1929-1952J 1926-1929Additional Information

V-Fire completed electronic distributor assembly includes the reverse distributer drive gear conversion to convert to the reverse rotation.*NOTE: Distributor includes internals that require reverse...

V-Fire distributor assembly includes top cover, clip, shaft assembly with reverse tooth gear installed and sensor cup.Distributor is designed for a late model electric ignition and uses a reverse...

Dimmer switch rebuild kit replaces the inter components of the switch.Includes a dimmer switch lever, brass plate backlite insulator, contact base, brass contact, rivets and spring. Fits:UL...

Headlamp socket wire includes cloth covered wires and correct bulb 3-prong connector plug. Fits:FL 1960-1969Additional Information OEM No.67753-60

Magneto top cover features a red finish and comes with a key. Fits:FX 1971-1980FL 1955-1980Additional Information UOM1 - EA

Wiring harness kit features cotton braided wire and asphalt loom. Wiring kit fits early Big Twin models.Order handlebar and tail lamp wires separately. Fits:FLH 1965-1969FL 1965-1969Additional...

Directional switch is a three position type with three cloth covered wires. Includes one each of green, red, and black wires and chrome plated housing.Switch features bottom exit wires, and stainless...

V-Fire Big Twin auto advance distributor assembly features a chrome plated base, body and top. Distributor is completely assembled with gear and all internal parts.Includes updated auto advance...

Battery cable is braided, flat, and unsheathed ground strap.Fits negative terminal on battery. Fits:XLH 1967-1972Additional Information OEM No.7023

Battery cable for negative post. Cable is flat, braided, unsheathed and a 4 gauge with 17/64" and 11/32" hole sizes on heat shielded terminal ends. Fits:XLH 1967-1972Additional Information <

Battery cable is 6 gauge with 13/32" and 11/32" hole sizes on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shielded terminal ends. Use for ground post. Fits:FL...

Black battery cable is 8 gauge with 17/16" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to battery...

Starter is 1.4kW unit that generates more power and shaft speed than the original type 0.8kW starter.Starter includes housing to mount to 1965-1978 Big Twin. Unit is Presolite high output type...

Regulator ground wire is battery box to ground type. Fits:FL 1965-1969Additional Information OEM No.70165-58 U

Zinc plated clamp is for automatic advance distributors. This is a single stud mount clamp for flanged mounts. Fits:FL 1966-1969Additional Information OEM No.

V-Fire completed electronic distributor assembly includes distributor body and shaft with reverse tooth gear, single fire electronic ignition unit, sensor cup, wire and hold down clamp.Distributor...

Auxiliary seat spring frame cross stud with spacer. Fits:FL 1958-1984Additional Information OEM No.52605-65 UO

Auxiliary zinc seat spring kit with chrome springs, brackets, nut set, and buddy seat spring bar.Kit adapts to all plunger mounted buddy seats for extra weight capacity. Fits:FL 1965-1984Additional...

Auxiliary seat spring yokesSold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52596-65

Auxiliary seat spring bracket catch set.Sold in a quantity of 2. Fits:FL 1965-1984Additional Information OEM No.52586-68

Auxiliary buddy seat spring bar. Fits:FL 1965-1984Additional Information OEM No.52566-65 UOM1 - EA

Auxiliary spring buddy seat bracket set. Fits:FL 1965-1984Additional Information OEM No.52583-68 UOM1

Zinc windshield extension bracket set.Sold as a set of two. Fits:FLH 1960-1984Additional Information OEM No.58107-60

Zinc windshield mounting bracket set includes right and leftSold in a quantity of 2. Fits:FLH 1949-1984Additional Information OEM No.58095-49<

Chrome 9" rear mount bar for rear turn signals.The distance between the mounting holes measures 5-3/16" center to center. Fits:FL 1963-1973Additional Information

Zinc plated carburetor upper and lower support bracket with hardware kit is for fitting a CV carburetor to a 1948-1985 Big Twin motor. Kit is used to mount motor case bolt between cylinders.This 2...