1968

Top starter mount brace for york electric starter kit and features a parkerized finish. Kit includes seat spring cross suport, seat bracket mount and long rear seat mount tab. For 4 speed models.For...

Starter motor support bracket for York electric starter kits to mount the 12 volt starter. Manufactured of cast iron and features a zinc plated finish. For 4 speed models.Bolts to the rear of the...

Front oil tank mount bracket. Fits:FL 1965-1985Additional Information UOM1 - EA ManufacturerV-Twin

FL type horn bracket features a zinc finish.*NOTE: Mounts FLH Delco horn under front headlamp cowl assembly, bracket bolts to top tree. Fits:FL 1965-1984Additional Information

XL finned header clamp set is investment cast aluminum with a vibration finish on a shot peen natural surface.*NOTE: Tighten set with 5/16" allen screws that are provided, the front and rear are the...

Mini solo seat shock kit includes 4" shocks and two 1" clamps and springs.For use on frames with a 1" cross member on the rear part of the frame. Shock has an alloy body and adjuster ring with a...

Mini solo seat shock kit includes two 4" shocks, springs and frame clamps for 1" bars.For use on frames with a 1" cross member on the rear part of the frame. Shock has an alloy body and adjuster ring...

Stainless steel XL muffler clamp features an inner diameter of 1-7/8" and a reinforced clamp pad area. Clamp features reinforcing pad spot that is welded in place for extra clamping power!*NOTE:...

Zinc plated horn mount bracket for XLCH models. Fits:XLCH 1965-1985Additional Information UOM1 - EA Manufactur

Black 2 bolt license plate bracket for fender mounting. Fits:FX 1971-1972GL 1955-1972XL 1955-1972Additional Information UOM1 - EA<

XLCH exhaust mount kit includes clamps and frame support tube and accepts mufflers.Kit includes a chrome front pipe clamp, a stainless steel exhaust header clamp set, a chrome 1-7/8" heavy muffler...

Zinc plated front seat mount plate for solo seat mounting. Accepts seat nose bracket hinge assembly. Mounts with 5/16" bolts. Fits:FL 1965-1984FX 1973-1984Additional Information

XL motor mount plate set is constructed of raw steel. Set includes right and left plate set used to incorporate mount ports to accept late model forward controls. Fits:XL 1957-1981Additional...

Ignition coil and switch bracket features a natural raw finish. Ignition coil and switch bracket mounts the coil and universal key switch in the one-piece bracket.*NOTE: Mount hardware not included...

Engine mount shim has a thickness of .036". Fits: FXST 1984-1998 FX 1971-1984 EL 1936-1940 FL 1941-1984 Additional Information UOM

Zinc starter motor bracket fits Prestolite electric starter motor. Fits:FL 1966-1981Additional Information UOM1 - EA

2 piece front lower motor mount plates features a black finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information UOM1 - SET

Billet top motor mount with holes has a chrome finish.For Panhead, Shovelhead and Evolution engines. The two holes are drilled and tapped 5/16-18UNC with a center distance of 2". Fits:FL 1948-1985FX...

Black battery tray support carrier bracket. Battery tray mount, available separately. Fits:XLH 1967-1978Additional Information OEM No.66480-67

Front oil tank bracket is zinc plated. Fits:FL 1965-1984Additional Information UOM1 - EA Manufacturer

Chrome cylinder air scoop brackets is for mounting an air scoop on the left side of your Big Twin Shovelhead. Bracket set has a chrome finish and makes mounting the air scoop a piece of cake...

Black bracket set is for front fork triple tree mounting. Set includes right and left sides. Fits:FLH 1949-1984Additional Information OEM No.68603-62

Battery tray carrier bracket has a bright chrome finish. Fits:FL 1965-1984Additional Information OEM No.66212-65

Chrome side mount tail lamp bracket will mount vertical flat side unit to FXD primary. Fits:FL 1965-1984FX 1965-1984FXST 1984-1988Additional Information

Zinc plated top motor mount is without the choke mount. Fits:FL 1948-1984Additional Information OEM No.16852-67

Top engine mount replaces stock type and features a raw finish.. Fits:FL 1948-1965Additional Information OEM No.16853-48

Regulator mount bracket attaches to engine mount and is made of steel with a chrome finish. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FL 1941-1984Additional Information

Top motor mount chrome is without the coil mount holes. This engine mount is for Panhead and Shovelhead engines. Fits:FX 1971-1984FL 1948-1984Additional Information

Front engine mount block threads into regulator mount block.This chrome mount block acts as a nut for the front bolts and will mount the regulator. Sold in a quantity of 2. Fits:FXST 1984-1999FLST...

Dual exhaust clamp set is for FLH models.Order pipe support bracket for 1958-1984 applications separately. Fits:FL 1966-1969Additional Information UOM<

Universal front solo seat mount includes mount and tilt up seat bracket for solo seats. Lower bracket is direct bolt onto FLH frames.The spacing between the hinge lugs measure 1-5/8". The stud thread...

Replica cadmium seat post and T kit includes fully assembled heavy duty cadmium plated post with a forged steel seat T, and related hardware.*Note: UPS may consider this part as packaged "oversize"...

Replica black seat post and T kit includes fully assembled post and forged steel seat T with related hardware.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the...

Replica chrome seat post and T kit includes fully assembled post and forged steel T and related hardware.Stock seat T will work for mounting buddy seats with the use of #31-0177 Front Nose Bracket. ...

Police type solo seat mount kit includes nose bracket, 2" hair pin springs and rear mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM

Regulator rectifier mount is for a 12 volt Bosch generator and has a chrome finish. Fits:XL 1958-1978FL 1958-1969Additional Information UOM1 - E

Police type solo seat mount kit includes nose bracket, 2" chrome coil springs and rear mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM

Ignition coil strap has a black finish. Fits:FX 1971-1977FL 1965-1977Additional Information OEM No.31727-65

Chrome Horn mount bracket. Fits:FLH 1968-1984FL 1968-1984Additional Information OEM No.69131-68 UOM

Replica chrome seat tee includes 2 stage front bushing and 3/8" bolt.NOTE: 2-stage steel bushings are removable and can be interchanged or replaced as necessary. Fits:FL 1965-1980G...