1968

Chrome rear exhaust pipe for Big Twins with crossovers fits stock systems only.Exhaust pipe will work with kick starter models. **CAUTION: These exhaust products are not...

Aluminum exhaust repair ports are to be welded on broken or damaged heads.Sold in a quantity of 2.

Rear heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65702-68B

Front heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65728-66

Replica chrome dual crossover system without mufflers features inter section of left side crossover at rear pipe.System is for 1966-69 Shovelheads and is for kick or electric start. Four piece system...

Black 2:1 siamese hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames, and features a one piece design for Ironheads only.One piece header will...

Chrome 2:1 hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames. Features a one piece designOne piece header will require the installer to saw out...

2 into 1 exhaust header set is for rigid or swingarm frames on 1966-1969. It is a three piece set incorporating the Y flat pipe combination.Set needs to be powder coated. *Note: UPS may consider this...

Chrome 2 into 1 exhaust header is for rigid or swingarm frames on 1966-1969 models. Header comes as a three piece set incorporating the Y flat pipe combination.*Note: UPS may consider this part as...

Shovelhead front and rear upsweep header pipe set featrues a chrome finish and will accept straight fishtail extensions or mufflers.2 piece header set is for rigid frame installation with nose cone...

Chrome upsweep rear exhaust header for Shovelhead motors in a rigid frames.The channel mount is on the rear side of the header pipes, to attach to the frame with "T" bolts. For use with upsweep...

Shovelhead rigid upsweep exhaust 4 piece header set features a chrome finish. Includes a front upsweep extension header, upswwep rear exhaust header pipe, flat "squash" pipe, and a front cylinder...

Starter solenoid black plunger boot. Fits:FLT 1979-1982XL 1967-1980FL 1965-1982FX 1971-1982Additional Information OEM No.31441

Horn mount rubber stud measures 5/16" and is ISO type with male-male ends. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST 1986-1989Additional Information

Foam pad only for rear fender bracket.Use with bracket to reduce vibration between the fender and the frame. Fits:XL 1954-1978XLCH 1954-1978Additional Information

Brake/clutch pedal pad set is rectangular shaped, with rubber construction, slide into place. Original design from the 1940's. Fits:FL 1941-1984EL 1936-1952Additional Information

Rubber riser bushingSold in a quantity of 2. Fits: FL 1960-1972 FX 1971-1972 K 1954-1956 XL 1957-1972 Additional Information

V-Twin - 28-1997 - Black Solenoid Plunger Rubber BootDescriptionSolenoid plunger boot fits 1965-1988 solenoids. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

V-Twin - 28-1994 - Fork Boot Set BlackDescriptionStock type black fork boot set for XL modelsSold in a quanity of 2. Fits:XL 1954-1970Additional Information

V-Twin - 28-1955 - Rear Master Cylinder Rubber BootDescriptionRear master cylinder boots are sold in an assortment of 5 early and 5 late type. Stock OE replacement. Fits:FL 1958-1978FX...

V-Twin - 28-1952 - Speedometer Isolation Mount KitDescriptionSpeedometer isolation mount kit includes two pins, clips, bushings, and molded outer ring which helps prevent damage to speedometer by...

V-Twin - 28-1949 - Riser Bushing and Washer Kit Description Bushing and rubber washer kit is for upper tree risers.Can be used with 2-1/2" bolt set, available seprately. *NOTE: Features a metal...

Top bushing set Fits: FXD 1991-2005 FXR 1988-1994 XL 1954-1999 Additional Information UOM 1 - KIT

39mm rubber sleeve for 38mm flatslide carburetors. Fits:FX 1971-1984FL 1966-1984XL 1963-1984Additional Information UOM1 - EA

Black rubber fork boot 41mm is designed for a better fit and improved sealing and wiping action.Sold in a quanity of 2. Fits:FL 1949-1976Additional Information

Replica orange handlebar grip seat is 1-1/8" on both sides. Fits:FL 1962-1972XL 1962-1972Additional Information UOM1 - SET

V-Twin - 28-0749 - Battery Tray ISO Stud SetDescriptionISO rubber mounting studs with male-male ends are 1/4"-20 coarse thread hex type.The rubber mount can be used for various applications on both...

White FLH brake pedal rubber kit includes the steel inner mount plate and stud.Kit includes back plate and stud for installation. *NOTE: Brake pedal must have a slot or hole for installation. ...

V-Twin - 28-0673 - Solid Mount Kit ChromeDescriptionChrome solid mount kit is to replace rubber bushings and cap washers.Order bolt set separately. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL...

Replica black tank filler rubber strip is just like the original and is used to fill in the space betweeen Fat Bob tanks when using a Seat T. Fits:FL 1941-1984UL 1939-1948EL 1939-1940Additional...

Battery pad kit includes bottom and cover pads for use with electric start models. Use with H-12 battery. Fits:FL 1965-1984XLH 1967-1978Additional Information

Off white brake pedal rubber.*NOTE: Because of the different manufacturing processes, the rubber may discolor with age over time and some products may appear closer to off-white in color. As they are...

V-Twin - 28-0619 - Battery Tray ISO StudDescriptionISO dash rubber mounting stud with male-female end has 5/16"-18 UNC thread. The rubber mount can be used for various applications on both stock and...

Use these chrome plugs in your stock handlebar grips to seal off the end of the handlebar to help prevent moisture from entering the handlebars.Sold as a pack of 10. Fits:FL 1960-1980FX 1974-1980XL...

Red nylon liner for primary chain Fits:FXD 1991-2000FXST 1984-2000FL 1965-1984FX 1971-1984FLST 1986-2000FXR 1984-1994FLT 1984-2000Additional Information

V-Twin - 28-0565 - Battery Tray ISO Mount KitDescriptionChrome ISO mount kit includes two 1/4"-20 rubber mounts and 2 chrome billet covers. Fits:FXST 1984-1999FLST 1986-1999FL 1965-1984FX...

Black oval brake pad with 5/16" stud. Fits:FL 1945-1984Additional Information OEM No.36951-45 UOM1 -

V-Twin - 28-0549 - Battery Tray ISO Stud SetDescriptionISO rubber mounting studs with male-male ends have 1/4"-20 UNC thread. The rubber mounts can be used for various applications on both stock and...

V-Twin - 28-0547 - Battery Tray ISO StudDescriptionISO rubber mounting stud with male-male end has 5/16"-18 UNC thread. The rubber mount can be used for various applicatio ns on both stock and custom...

V-Twin - 28-0546 - Battery Tray ISO Stud SetDescriptionISO rubber mounting studs have male-male ends, with 1/4" - 2 0 UNC thread. The rubber mounts can be used for various applications on both stock...