1968

World's Fair half moon footboard kit features black footboards with alloy World's fair inserts.Attach inserts with four screws. Mounting bracket features 10" spacing. Fits:FL 1941-1984W...

Deluxe half moon footboard kit features black footboards with alloy inserts.Mounting bracket features 10" spacing. Fits:FL 1941-1984W 1936-1952Additional Information

Exact replica black footboards with factory style "X" ribs and construction. Features black half moon footboard rubber inserts with bullseye.Set of two. Footboard rubbers are glued in place, rivets...

Chrome passenger footpeg bracket bolts to rear motor mount bolts, for use on rigid or swingarm frames.Uses large female driver footpegs. Order footpegs and return springs separately. Fits:XL...

Chrome mustache highway bar kit with cats paw footpegs.These bars are not to be used with a front engine bar. Fits:FX 1971-1984FL 1958-1984Additional Information

V-Twin - 27-0560 - Shifter Peg Kit for Heel-Toe ShifterDescriptionFlame shifter peg kit for use with heel toe shifters. Features chrome flames with rubber accents.Sold as a pair. Fits:FL...

Center kickstand kit is constructed of cast aluminum and includes spring, and hardware for mounting to stock swingarm frames. Fits:XL 1957-1981K 1952-1956Additional Information

Chrome kickstand tab kit includes washer, acorn nut, and tab . Fits:FXST 1984-1999FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Constructed of steel and chrome plated, this adjustable kickstand stop is installed on the kickstand shaft to prevent the leg from banging into the primary case. Fits:FLST 1986-1990UL 1938-1947FXST...

Chrome kickstand mounting kit includes kickstand mount, spring, leg stop, and spring plate. Kickstand measures 11-1/2" from bend to top. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL...

Chrome kickstand mount bracket is without holes in the face of the bracket, as original. Fits:UL 1938-1947FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Chrome kickstand spring plate. Fits:FLST 1986-1990UL 1938-1947FXST 1984-1990FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Stop your kickstand from hitting your primary cases by installing this steel leg stop on your kickstand shaft. Fits:FLST 1986-2006FXST 1984-2006FX 1971-1984EL 1936-1940FL 1941-1984Additional...

Stamped forged steel footboard mount tab set. Fits:EL 1936-1940FL 1941-1984UL 1936-1940Additional Information UOM1 - SET

Kickstand shaft washer set installs between the stand and the bracket. Features a zinc plated finish.Used to adjust the height when the stand is attached to the bracket. Fits:FL 1941-1985Additional...

Zinc plated primary footboard mounting kit includes hardware and extended rear footboard bracket for use with custom drag or muffler pipes.Kit is for use with OE type exhaust systems. *NOTE: Includes...

Zinc oval inspection cover for the left side with footpeg spline.. Fits:FL 1965-1984Additional Information UOM1 - SET

Zinc splined footpeg support is for the right side and is offset type.Mounting hole inner diameter measures 3/4". Fits:FL 1965-1977Additional Information UO

ISO mount swingarm chain guard has a black finish and comes with rubber bushing and rear bracket.Can also be used on 1958-1984 FL for the lighter FX look. Fits:FX 1966-1978FL 1958-1984FXE...

FLH style full chain guard has a gloss black finish and includes bushing. Fits:FL 1963-1982Additional Information OEM No.60302-63

FLH style full chain guard has a chrome finish and includes bushing.Center hole to center hole measures 10-5/8". Fits:FL 1963-1982Additional Information OEM

Lower front mount tie rod ball joint.The ball diameter is 1.259", the step downo from that is .940", the center is 1.007", the step down from the center is .857" and the end is 1.012". Fits:VL...

Rear wheel brake rod and cable adjusting nut features a cadmium finish. Fits:XL 1957-1978K 1952-1956KH 1952-1956Additional Information UOM<

Rear wheel brake rod and cable adjusting nut features a chrome finish. Fits:XL 1957-1978K 1952-1956KH 1952-1956Additional Information UOM

Includes 16-7/8" extra long rod, nuts and spacers.For use with 1.060" diameter seat posts. Fits:UL 1937-1948EL 1936-1940FL 1941-1980Additional Information

Seat post kit includes 15-7/8" rod and mounting hardware. Fits:UL 1937-1948EL 1936-1940FL 1941-1980Additional Information UOM1 - KIT

Nylon bushing for hand lever Fits:FX 1971-1984XL 1968-1987FXR 1984-1987FXST 1984-1987FLT 1979-1987FLST 1986-1987FL 1968-1984Additional Information

Riser bushing set include 4 bushings. Fits: FL 1960-1972 Additional Information OEM No. 45732-60 UOM

Alloy clutch lever with a 7/16" hole. Fits:XL 1957-1970Additional Information UOM1 - EA ManufacturerV

Bates polished stainless steel hand lever assembly with ball end includes slotted lever bushing as original with 3/8" hole for brake or clutch. Fits:FL 1968-1984Additional Information

Polished stainless steel hand lever with a ball end. Fits:FL 1944-1969Additional Information UOM1 - EA Manufac

Hand lever pivot pin set consists of one pin, one grease fit ting and one retaining ring. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information

Polished hand lever is clutch or brake type. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information OEM No.45024-65

Chrome hand lever is clutch or brake type Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information OEM No.45024-65

Assembly includes cable pin. Lever has a 3/8" hole size for cable entry. Fits:FL 1968-1972FX 1971-1972Additional Information OEM No.38608-68

Assembly includes cable pin. Lever has a 3/8" hole size for cable entry. Fits:FL 1968-1972FX 1971-1972Additional Information OEM No.38608-68

Polished clutch hand lever assembly with 7/16" hole. Fits:XL 1965-1970K 1952-1956Additional Information OEM No.38604-65A

Chrome clutch hand lever assembly with 7/16" hole includes cable pin. Fits:XL 1965-1970 1" barsAdditional Information OEM No.38604-65A

Polished hand lever with ball end includes a slotted lever as original with a small hole for brake or clutch. Fits:FL 1941-1969Additional Information OEM No.

Pivot pin and bushings for hand lever. Fits:FX 1971-1984XL 1968-1987FXR 1984-1987FXST 1984-1987FLT 1979-1987FLST 1986-1987FL 1968-1984Additional Information