1968

Locating washer for backing plate pivot stud.Sold in a quantity of five. Fits:FL 1949-1971Additional Information OEM No.44454-48

Brake backing plate pivot stud with locating washer. Fits:FL 1949-1971G 1958-1971Additional Information OEM No.44448-48

Chrome fork neck cup set with races installed.Includes bearings. Must order dust shields separately. Sold as a pair. Fits:FL 1960-1984Additional Information

Kit includes neck cup bearing, dust cover set, cone cover nut, stem nut and lock washer kit. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information

Zinc fork neck cup set with races installed. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.48311-60

Chrome fork neck cup set with races installed.Sold as a pair. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.

V-Twin - 24-0117 - Upper and Lower Zinc Dust ShieldsDescriptionSet includes both an upper and lower dust shields. Each shield is zinc and is for use with Timken style bearings.Sold as a pair...

Front brake backing plate pivot stud. Fits:FX 1971-1972XL 1964-1972Additional Information OEM No.44156-64

V-Twin - 24-0114 - Upper and Lower Chrome Dust ShieldsDescriptionChrome upper and lower triple tree dust shield set is for use on Big Twin models with Timken style bearings.The lower cover is the...

Chrome hex type cone cover nut features cover with built in nut. Fits:FL 1949-1979Additional Information OEM No.48330-48

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

Zinc triple tree upper dust shield Fits:XL 1952-1978Additional Information OEM No.48370-52 UOM1 - EA<

Zinc ball bearing neck cups only with a fitted outer diameter.Sold as a pair. Fits:XL 1952-1977WL 1930-1957Additional Information OEM No.4

Feature built in rubber seal where bearing contacts the top of the race. This kit chrome cups and dust shields. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FLH 1949-1984Additional Information

Upper or lower fork stem ball bearing race Fits:XLH 1957-1977WL 1929-1957XL 1957-1977K 1952-1956G 1957-1957XLCH 1957-1977Additional Information <

Front brake cable tube only chrome has a 5/16" x 24 thread. Fits:K 1952-1956XL 1957-1972 FrontFL 1950-1971Additional Information OEM No.

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Fork tube includes fork damper kit, fork spring set, fork baffle kit, chrome fork tube cap, inner fork tube plug, oil seal, and snap rings. The fork tubes are stock and are 20" long.Sold as a pair...

Raw machined steel fork tube is 20" stock length.Before installing, compare old and new tubes. Be sure the stock top plug threads fit into the new fork tubes. Sold as a pair. ...

Fork tube set is 20" stock length.Before installing, compare old and new tubes. Be sure the stock top plug threads fit into the new fork tubes. Sold as a pair. *NOTE:...

Kit includes brake shoes, springs,polished backing plate, black drum, axle sleeve, nuts, cam with lever and mount stud for right side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud with...

Kit includes brake shoes, springs, chrome backing plate, chrome drum, axle sleeve, nuts, cam with leverm and mount stud for right side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud with...

Kit includes brake shoes, springs, polished backing plate, black drum, axle sleeve, nuts, cam with lever and mount stud for left side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud with...

Kit includes brake shoes, springs, satin chrome backing plate, chrome drum, axle sleeve, nuts, cam with lever and mount stud for left side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud...

XL rear brake cam. Fits:K 1954-1956 Front or RearXL 1957-1963 FrontXL 1957-1978 RearAdditional Information OEM No.44264-54 <

This chrome billet aluminum master cylinder with offset hole replaces Wagner style master cylinders.This master cylinder has a bore size of 5/8" and a milled body design. It is 3-1/8" tall. Uses...

Kelsey Hayes type billet master cylinder has 5/8" bore with offset mount holes.This master cylinder can be used with 10mm banjo bolt or flare fittings. Fits:FL 1958-1978FX 1971-1978Additional...

V-Twin - 23-1971 - XL Rear Brake Shoe CamDescription1.5" brake shoe cam for the rear. Fits:XL 1957-1978K 1952-1956Additional Information

V-Twin - 23-1970 - 1-1/2 inch Rear XL Brake Drum KitDescription1.5" wide shoes rear brake drum kit for use with XL rear brake drum. This is a partial kit.Order brake arm and lug bolts separately...

V-Twin - 23-1968 - Rear Brake Pivot StudDescriptionRear brake pivot stud. Fits:XL 1957-1978Additional Information OEM No.

V-Twin - 23-1967 - Rear Brake Bushing Side PlateDescriptionRear brake bushing side plate. Fits:XL 1957-1978Additional Information

V-Twin - 23-1966 - Rear Brake Cam WasherDescriptionRear brake cam washer. Fits:XL 1957-1978K 1952-1956Additional Information

V-Twin - 23-1965 - XL Rear Brake Drum KitDescriptionXL rear brake drum kit includes a black finned rear brake drum, alloy backing plate and a 1/2" wide shoe set. Fits:K 1952-1978XL...

V-Twin - 23-1964 - XL 1.5 inch Wide Brake Shoe SetDescriptionXL 1.5" wide brake shoe set for rear backing plate to fit finned brake drum. Must be used for installation on these V-twin parts. Fits:XL...

V-Twin - 23-1963 - XL Rear Brake Backing PlateDescriptionAluminum construction rear brake backing plate to fit finned cast drum backing plate. Accepts 1 1/2" wide shoes. Use with 11/16" diameter axle...

V-Twin - 23-1962 - XL Finned Rear Brake DrumDescriptionXL finned rear brake drum with a black finish. Sprocket is riveted in place, cast iron construction.Use with stock shoe set or wide shoes with...

V-Twin - 23-1961 - Rear Master Cylinder Rebuild KitDescriptionRebuild kit includes the top gasket and two boots.For rebuilding disc or drum type master cylinders. Check service manual for required...

Rear backing plate for mechanical brake features a cast finish as original. Fits:XL 1957-1972Additional Information UOM1 - EA

Chrome steel spacer is 3/8" x 3/4" x 3/16".This spacer is used in the rear master cylinder and also a spacer for the brake pedal stop. Spacer can also be used on banana bulleye calipers that utilizes...

Hydraulic brake pedal features a stainless steel finish. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA