1978

Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam) Features: Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings

Jims - 95660-42 Main Seal Tool fits '41-'79 4-Speed Transmissions Features: Used to remove and install the main drive seal on specific Harley-Davidson® Big Twin models Made in the U.S.A

Jims - 95724-57 Tappet Guide Puller Tool fits '57-'85 Sportster Models Features: Used to remove press-fit tappet guides from crankcase Made in the U.S.A.

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and...

Jims - 33096-54B Kickstarter Shaft fits '36-'86 Big Twin Models Features: Precision-machined replacement shaft Made in the U.S.A.

Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice

Jims - 97273-60 Camshaft Bearing Tool fits '57-'90 Sportster, '87-'90 Buell Models Features: Use to install inner cam bearings Made in the U.S.A.

Jims - 94547-80B Sprocket Shaft Bearing Race Tool fits '77-'03 Sportster, '94-'02 Buell Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to re

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing

Jims - 97178-71 Clutch Spring Compressor fits '71-'E84 Sportster Models (OEM #97178-71) Features: Used to remove or install clutch components Made in the U.S.A.

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press c

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length H

Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to...

Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to kee

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal<

Jims - 96384-39 Shift Fork Gauge fits '39-'78 Big Twin Models Features: This tool checks alignment of Big Twin transmission shift forks Made in the U.S.A.

V-Twin - Nickel Plated Tappet Block Screw Kit fits '48-'84 FL Model Tappet base bolt set of eight with 1/4" x 20UNC thread, is nickel plated, and has a hex shaped head. Screw does not have taper and...

Belt Drives Ltd. - 3" Belt Drive Kit fits '70-'78 Big Twin with Electric Starter Features: Designed for electric start applications Kit includes 141-tooth drive belt, motor plate, clutch hu

Swingarm frame oil tank rear mount bracket with spacers features bright zinc plating. Fitment: FL 1958-1984

V-Twin - Footboard Tabs fits '41-'84 FL, '36-'40 EL/UL Models Forged steel footboard tabs for 1" frame tubes. Fitment: EL 1936-1940 FL 1941-1984 UL 1936-1940

Namz - Speedometer Drive Block-Off Kit Features: Kit includes polished stainless steel block-off plate, gasket,10 x 24 stainless steel button-head screw and lockwasher Easy to install

Colony - 8140-34 Chrome Stock Engine Case Bolt Kit fits '70-'78 FL, '71-'78 FX Models Engine case kit includes all the necessary hardware to bolt together engine cases. Fitment: FX 1971-1978 FL...

Colony - 9018-5 Tank Hand Shifter Lever Stud fits '36-'48 UL, '36-'40 EL, '41-'84 FL Models (OEM #33775-37) - Chrome Chrome Tank Hand Shifter Lever Stud Fitment: UL 1936-1948 EL 1936-1940 FL...

Colony - 9103-4 Shoulder Bolt fits '36-'48 UL, '36-'40 EL, '41-'84 FL Models (OEM #33879-36) - Chrome Chrome shoulder bolt. Fitment: UL 1936-1948 EL 1936-1940 FL 1941-1984

Colony - 9523-1 Chrome Oil Pump Check Valve Plug fits '36-'40 EL, '41-'80 FL Models (OEM #26362-36) Chrome oil pump check valve plug Fitment: EL 1936-1940 FL 1941-1980

Colony - 9524-1 Cadmium Oil Pump Valve Plug fits '36-'40 EL, '41-'80 FL Models (OEM #26362-36) Oil pump check valve plug with a cadmium finish Fitment: EL 1936-1940 FL 1941-1980

Colony - 9525-1 Parkerized Oil Pump Check Valve Plug fits '36-'40 EL, '41-'80 FL Models (OEM #26362-36) Oil pump check valve plug with a parkerized finish Fitment: EL 1936-1940 FL 1941-1980

Colony - 9624-16 Parkerized Replica Cylinder Base Nut Kit fits '57-'85 XL, '29-'73 G, '29-'52 WL Models Replica parkerized cylinder base nut kit Fitment: WL 1929-1952 XL 1957-1985 G 1929-1973

Colony - 9638-30 Rear Fender Strut Acorn Type Bolt Kit fits '58-'80 FL Model Rear fender strut chrome acorn type bolt kit replaces origin al hardware for FLH models Fitment: FL 1958-1980

Colony - 9652-1 Speedometer Cable Clamp fits '61-'80 FL Model (OEM #67074-57A) Speedometer Cable Clamp Fitment: FL 1961-1980

Colony - 9671-20 Parkerized Transmission Side Cover Kit fits '37-'48 UL, '71-'84 FX, '36-'40 EL Models Parkerized hex stock style kit includes nuts and washers for the transmission side cover and...

Colony - 9691-2 Seat Post Rod Lock Nut and Lock Washer fits '37-'48 UL, '41-'81 FL, '36-'40 EL Models (OEM #51674-25) Parkerized seat post rod lock nut and lock washer Fitment: UL 1937-1948 VL...

Colony - 9696-18 Parkerized Seat T Mount Kit fits '37-'48 UL, '36-'40 EL, '41-'84 FL Models Seat T mount kit has a parkerized finish and includes bolt, washers, spacers and nuts to mount stock type...

Colony - 9706-4 Parkerized Tank Hand Shifter Rod End Bolt Kit fits '36-'48 UL, '36-'40 EL, '41-'84 FL Models (OEM #33879-36) Tank hand shifter rod end bolt kit has a parkerized...

Colony - 3547-5 Sprocket Bolt Zinc Plated Washer Kit fits '82-'94 FXR, '91-'17 FXD, '79-Up Sportster Models Zinc plated spring steel washers used on 7/16" rear sprocket bolts Fitment: FXST...

Colony - 3560-2 Lower Front Mount Tie Rod Ball Joint Screw Set fits '37-'48 UL, '36-'40 EL, '41-'84 FL Models (OEM #6041-20) Lower front mount tie rod ball joint screw set. Sold as a...

Colony - 3574-1 Gas Tank Rubber Divider fits '39-'79 FL, '39-'79 FLT Models (OEM #3503-39) Gas tank rubber divider Fitment: FL 1939-1979 FLT 1939-1979