1984

Drag Specialties - Fat Bob-Style Flatside Gas Tank fits '84-'99 FXST/​FLST, '85-'86 FX/​FXWG Models (Repl. OEM #61211-84A/ 61228-84) - 5 Gallon Features: Distinctive reproduction gas tanks constructed of drawn steel Use with '84-E'96 screw-in caps...

Drag Specialties - Extended Dash-Style Rubber-Mount Quickbob® Tank Kit fits '86-'94 Sportster Models The Drag Specialties Extended Dash-Style Rubber-Mount Quickbob® Tank Kit is designed for '86-'94 Sportster Models. This comprehensive kit...

Drag Specialties - One-Piece 2" Extended Gas Tank W/ Dual Screw-In Caps fits '84-'00 FXR Models Features: 2" Stretch over stock length; capacity is approximately 4.2 gallons Comes complete with all necessary mounting hardware Gas tanks are fully...

Drag Specialties - Extended Smooth-Top QuickBob® Rubber-Mount Single-Cap Style Gas Tank fits '82-'03 Sportster Models The extended design of this tank permits the tank's lines to flow into the seat's line for an incredible look. It has a rear-end...

Drag Specialties - 42-1/2" Black Vinyl Throttle Cable (Repl. OEM #56327-81/ 56327-81A/ 56327-81B) Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for smooth operation...

Drag Specialties - 36" Black Vinyl Throttle Cable fits '81-'89 Big Twin, 81'-'85  Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon...

Drag Specialties - 44" Black Vinyl Throttle Cable fits '81-'89 Big Twin, 81'-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 32-1/2" Black Vinyl Idle Cable (Repl. OEM # 56323-81/ 56323-81A/ 56323-81B/ 56323-81C) Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for smooth...

Drag Specialties - 42-1/2" Black Vinyl Idle Cable (OEM #56328-81) Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for smooth operation and long life Length given is...

Drag Specialties - 39-1/2" Black Vinyl Idle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 44" Black Vinyl Idle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for...

Drag Specialties - 48" Black Vinyl Idle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for...

Drag Specialties - 52-9/16" Black Vinyl High-Efficiency Clutch Cable (Repl. OEM #38618-68A/ 38618-68B/ 38618-68C/ 38618-68) Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

Drag Specialties - 58-9/16" Black Vinyl High-Efficiency Clutch Cable fits '68-'86 Big Twin Models (4-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve...

Drag Specialties - 47-1/16" Black Vinyl High-Efficiency Clutch Cable (Repl. OEM #38619-84) Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth operation High-performance...

Drag Specialties - 50" Black Vinyl High-Efficiency Clutch Cable fits '68-'86 Big Twin Models (4-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

Drag Specialties - 54" Black Vinyl High-Efficiency Clutch Cable fits '68-'86 Big Twin Models (4-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

Drag Specialties - 56" Black Vinyl High-Efficiency Clutch Cable fits '68-'86 Big Twin Models (4-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

Drag Specialties - 58" Black Vinyl High-Efficiency Clutch Cable fits '68-'86 Big Twin Models (4-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

Drag Specialties - 60" Black Vinyl High-Efficiency Clutch Cable fits '68-'86 Big Twin Models (4-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

Drag Specialties - 55" Black Vinyl High-Efficiency Clutch Cable fits '71-'85 Sportster - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth...

Drag Specialties - 11.8" Rear Center Hub Mount Drilled Brake Rotor - Polished Stainless Steel (Repl. OEM # 40939-79A) Drag's Polished Stainless Steel Drilled Brake Rotors are drilled for improved heat dissipation and regular braking in wet weather. Hub...

Drag Specialties - 10" Front Center Hub Mount Brake Rotor Shovelhead - Stainless Steel (Repl. OEM #41806-72B/ 41813-79) Features: Ground finish Drilled for better heat dissipation and improved brake performance in wet weather Designed for use with...

Drag Specialties - 11.5" Rear Center Hub Mount Drilled Brake Rotor - Polished Stainless Steel (Repl. OEM #41791-79A) Features: Drilled for better heat dissipation and consistent braking in wet weather Designed for use with OEM and most aftermarket...

Drag Specialties - 11.5" Front Center Hub Mount Drilled Brake Rotor - Polished Stainless Steel (Repl. OEM #44136-84A/ 44136-92) Features: Drilled for better heat dissipation and consistent braking in wet weather Designed for use with OEM and most...

Drag Specialties - Front/Rear Caliper Seal Kit fits '80-'84 Touring Models (OEM #s 44133-72/ 44007-80) Features: High-quality replacement components Includes seal and dust boot Fitment 1984 Harley-Davidson Electra Glide Special...

Kodlin - NXL Floorboards fits '80-'24 Big Twin Models - Black W/ Stainless Steel Cover These floorboards are constructed from CNC-machined billet aluminum with a brushed stainless steel cover. There are coordinating Mini Rear Boards available...

Drag Specialties - Spark Plug fits '79-'85 Harley Sportster Models Features: Plugs have a unique look with their black ceramic body and bold red logo/script Insulator is made of 95% pure alumina; features strong resistance to heat shock and superior...

Rick's Motorsport Electrics - 12V Starter Motor fits '74-'88 Big Twin & '74-'E76 XLH Models Equipped W/ Hitachi Starters 5.25” Long (Repl. OEM #S 31570-73/B/C/T) A bolt-on replacement for an OEM Starter.  Features New 12V starter...

Drag Specialties - Rear Axle Kit fits '80-'99 Touring Models (12.625") This kit's bright chrome finish on the axle and hardware will beautify your bike. NOTE: Rear axle length given is measured from the inside of the bolt head to the end of the threads...

Drag Specialties - Rear Axle Kit fits '80-'86 Big Twin 4-Speed Models W/ Belt Drive (12.4375") This kit's bright chrome finish on the axle and hardware will beautify your bike. NOTES: Rear axle length given is measured from the inside of the bolt head...

Bassani Exhaust - 2-into-1 Super Bike Exhaust System W/ 4" Muffler fits '84-'00 FXR Models - Stainless Steel Bassani's 2-into-1 Super Bike Exhaust System has stainless steel headpipes which merge into an advanced collector and into Bassani's 4" Super...

Drag Specialties - Saddlebag Support Brackets fits '58-'86 FL Models NOTE: Not compatible with OEM detachable sissy bat/luggage rack. Features Chrome-plated steel brackets hold throw-over saddlebags away from brake caliper and swingarm Fasten to...

Willie and Max - Triangulated Swingarm Saddlebag - Black This Saddlebag comes with a protective film to prevent the swingarm or frame from being scratched. Please note this bag is not for use with passenger floorboards or passenger footpegs...

Dynatek - Single-Fire Ignition and Coil Kit fits '70-'99 Big Twin & '71-'03 XL Models (Exc. Twin Cam, 1200S Models) Dynatek's complete electronic ignition systems are crafted with the hottest state-of-the-art engineering. This is the exact same...

Dynatek - Dual-Fire Ignition and Coil Kit fits '70-'99 Big Twin & '71-'03 XL Models (Exc. Twin Cam, 1200S Models) Dynatek's DSK61 Dyna S and coil system is the exact same race-winning, record-breaking ignition used by today's top drag and road...

Drag Specialties - Oil Filter Assembly fits '40-'84 Touring Models This assembly can be dismantled, and the filter can be replaced with the Drop-In Filter Element DS275202 (See 'Also Bought' section). Available in your choice of black or chrome finish...

DP - High-Performance Friction Clutch Plates fits '71-E'84 Sportster Models (Repl. OEM #37985-71) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for fade-free performance. Qty. Included:...

DP - High-Performance Steel Clutch Plates fits '71-E'84 Sportster Models (Repl. OEM #37992-71) The DP High-Performance Steel Clutch Plates has will neither expand nor fade or promote clutch swell. Qty. Included: 8 Features Specifically designed to...

DP - High-Performance Friction Clutch Plates fits '68-E'84 Big Twin Models (Repl. OEM #37930-68) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for fade-free performance. Qty. Included:...