1987

Bolt-on 4-finned cam cover kit for Evolution models to give it a Retro-style Panhead look!Kit includes a chrome forged aluminum 4-finned cam cover with bushings installed, cast aluminum cam cover...

Bolt-on cam cover kit for Evolution models to give it the Retro-style 1965 Panhead look.Kit includes a replica cast cam cover flatstide style with bushings installed, cast aluminum cam cover adapter...

Cast aluminum cam cover dress up adapter trim allows use of the early retro-style Panhead cam cover to fit Evolution models.Mounts to existing nose cone cover. *NOTE: Actual cam cover not included...

Assembly includes new rods, crank pin, nuts, cages and standard rollers fitted and assembled.Piston pin bushings are installed and honed for stock wrist pin. Fits:XL 1986-1999Additional Information

Kit includes Andrews EV13 cam.Includes oil pump snap rings, pinion shaft key, Sifton pinion gear set, Sifton cam chest steel breather, cam chest breather valve washer, .055 cam bearing washer, cam...

V-Twin - 9751-11T - Cam Cover Screw Kit Allen TypeDescriptionAllen type screw kit for the cam cover. Fits:XL 1986-UPAdditional Information

Sprocket cover master cylinder mount kit with allen type screws. Fits:XL 1986-2003Additional Information UOM1 - EA

Allen type primary cover screw kit with a chrome finish. Fits:XL 1986-1990Additional Information UOM1 - KIT Ma

Oil pump check and relief valve plug with a chrome finish. Fits:FLT 1981-1998FXST 1984-1998FXR 1982-1994FXD 1991-1998FL 1981-1984FLST 1986-1998FX 1981-1984Additional Information

Hex type shifter bracket bolt kit with a parkerized finish. Fits:FXST 1984-1999FLT 1980-1986FXR 1982-1994FLST 1986-1999FX 1971-1984FL 1936-1984Additional Information

Hex type shifter bracket bolt kit has a chrome finish. Fits:FXST 1984-1999FLST 1986-1999FL 1952-1984FX 1980-1986Additional Information

Chrome allen screw kit for primary cover. Fits:FLT 1985-1999FXR 1985-1994Additional Information UOM1 - KIT

Transmission side cover allen screw. Fits:FXD 1991-2005FLST 1987-2006FLHR 1998-1998FXST 1987-2006Additional Information UOM1 -

Transmission shifter cover screw, allen type. Fits:FLT 1987-1999FXR 1987-1994FLST 1987-1999FXST 1987-1999Additional Information UOM

Stianless steel 12 point sprocket bolt and nut kit with washer head, features a 7/16"-20 x 1-1/4" thread. Fits:FX 1973-1984 cast or wire wheelFL 1973-1984 cast or wire wheelXL 1973-1990 cast or wire...

V-Twin - 8794-10T - Chrome Front Brake Disc Bolt Set Description Chrome allen bolts and nuts for front brake disc. Set includes 5 bolts and 5 nuts.5 piece kit. Fits: FXST 1984-UP FXDWG 1991-2017...

Rear disc tapered screw set includes 5 screws and 5 nuts. Fits: XL 1979-1991 FL 1981-1984 FLST 1986-1991 FX 1981-1984 FXST 1984-1991 Additional Information

V-Twin - 8716-1T - Inner Fork Tube Plug ChromeDescriptionInner fork tube plug, chrome finish. Fits:FXST 1984-UPFX 1977-1984FLST 1986-UPFX 1980-1986Additional Information

V-Twin - 8233-1T - Chrome Flat Top Fork Tube BoltDescriptionFork tube bolt with flat top and chrome finish. Fits:FXD 1991-2005FXST 1984-UPFLST 1986-UPFL 1977-1984Additional Information

Chrome domed triple tree fork stem nut features 7/8" x 24 inside threads. Fits:FX 1971-1984XL 1978-1987Additional Information UOM1 - EA

V-Twin - 7508-20T - Chrome Pushrod Cover and Clip KitDescriptionChrome pushrod cover and clip kit includes 4 clips and cups, seals, springs and cork washers. Fits:FXST 1984-UPFL 1940-1947FXD...

Oil pump mount set features allen style screws.Includes (4) 1/4"-20 x 2-1/2" and (2) 1/4"-20 x 2-3/4" screws. *NOTE: When mounting oil pump mount set to V-Twin engine cases, it does not require a...

Chrome fender strut with three holes. Fits:FLST 1986-1999Additional Information UOM1 - SET Manufacturer

Rear engine mount cover. Fits:FXR 1987-1995FLT 1987-1995Additional Information UOM1 - EA Manufacturer

Lower shock stud kit includes 2 nugget nuts and 2 studs. Fits:FXRS 1982-1994FXR 1982-1994Additional Information OEM No.1614

V-Twin - 54-0421 - Chrome Shock Stud Washers 1/2 inch HoleDescriptionChrome 1/2" hole x 1" flat shock stud washers Fits:FLT 1997-UPFXR 1982-1994FL 1965-1984FX 1971-1984XL 1975-UPFXD...

Dry charged 12 volt battery and requires filling with electrolyte acid available from your local auto parts store.Not maintenance free. Battery is shipped dry without acid. Battery is lead/acid type...

V-Twin - 52-2033 - 17 inch x 4.5 inch Rear Spoke WheelDescription17" X 4.5" Replica rear wheel features a chrome rim, 40 chrome spokes and a chrome hub.FXR applications must use seal spacers. Uses a...

V-Twin - 52-1291 - 23 inch x 3.0 Drop Center Chrome Wheel RimDescriptionFront 23" chrome drop center rim has an outside width of 3.0" with 2 flat flanges and 40 holes.The outside width measures 3.65"...

16" x 3.00" rear wheel assembly includes a chrome profile smoothie rim, steel chrome hub with 3/4" bearings installed, and chrome spokes.**NOTE: All spokes on wheel need to be inspected and...

Wheel features a 16" x 3.00" black rim, chrome hub with internals and 40 chrome spokes.The flange of the hub measure 7" between each other. *NOTE: 32mm on the pulley side, valve stem side. 27mm...

Front 23" x 3.00" wheel assembly features chrome spokes, chrome hub, and chrome rim. This wheel comes with 3/4" bearings and fits dual disc applications.*Note: UPS may consider this part as packaged...

21" X 2.15" front single or dual wheel includes a chrome hub 40 chrome twirled spokes and a chrome drop center rim assembled. Rim has a rolled edge design for added strength.NOTE: All spokes on wheel...

Rear wheel assembly features a 40 hole 16" x 4" chrome rim, 40 stainless spokes and a chrome rear hub with bearings installed. Wheel is laced and trued.Accepts a 150-160 tire size. Deluxe rim is OE...

Rear wheel assembliy features a 40 hole 16" x 4" chrome rim, 40 chrome spokes and a chrome rear hub with bearings installed. Wheel is laced and trued.Accepts a 130-140 tire size. The inner bearing...

This 21" x 3.25" front wheel features a chrome hub with all internal bearings installed, 40 chrome spokes, and a chrome rim.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 ...

Rear wheel assembly features a 40 hole 16" x 3" chrome rim, 40 polished stainless steel spokes and a chrome rear hub. Wheel is laced and trued.*NOTE: 32mm on the pulley side, valve stem side. 27mm...

Rear wheel assemby features a 40 hole 16" x 3" chrome rim, 40 chrome spokes and a rear hub. Components are laced and trued.Accepts a 130-140 tire size. Deluxe rim is OE type with small center valve...

Front 16" x 3.00" wheel include chrome hub with internals, chrome drop center rim, and 40 chrome twirled spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

16" x 3.00" rear wheel features a chrome rim, chrome hub with internals, and 40 twirled spokes assembled.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original...