1987

V-Twin - Shifter Sleeve Kit fits '84-'94 FXR Model FXR shifter sleeve kit includes a nylon sleeve, lock tab and 2 o-rings Note: The long sleeve goes between the two outer brass bushings - one is the inspection cover and one is the inner primary...

Drag Specialties - Premium Sintered Metal Rear Brake Pads (Repl. OEM# 44213-87, 44209-87C) Replacement OEM# 44213-87, 44209-87C Features Premium sintered metal brake pads designed for H-D motorcycles More durable than the stock brake pads Pad...

Wild 1 Chubby Flatline 12" Handlebars Features: 1-1/4" diameter Drilled for internal wiring Chrome Made in USA Measurements: 12" TALL 24" WIDE FLAT 0" PULL BACK 0° WRIST ANGLE

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

S&S Cycle - Oil Pump Replacement Gasket Kit fits '36-'69 Big Twin Models Features: Made in the U.S.A. Fitment 1991 Harley-Davidson Dyna Sturgis FXDB - - 1990-1991 Harley-Davidson Low Rider Convertible...

Colony - 8703-2 Relief Valve Plug Kit fits '81-'84 Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve port on oil pumps. Used as an oil pressure indicator...

V-Twin - Transmission Motor Support fits '82-'94 FXR Model Zinc plated transmission motor support features laser cut 1/4" steel with all holes in place. Includes the tab for front exhaust mounts. Acts to absorb torque between the drive train...

Colony - Motor Case Kit fits '79-'95 Big Twin Models - Cadmium Features: Contain all necessary hardware to bolt together stock motor cases Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - Head Bolt Set fits '86-'91 Sportster Models (OEM #16478-85A, 16480-85A) Features: 12-point replacement headbolts Made in the U.S.A. Fitment 1992 Harley-Davidson Dyna Daytona FXDB - - 1991 Harley-Davidson Dyna Sturgis...

Drag Specialties - Oil Pressure Gauge Mount fits 80” Evolution Engines (Except FLT/HT/HS/HR/​Ultra) Features: Chrome mount attaches at the crankcase and rocker box mounting bolt, allowing an unobstructed view of your oil pressure Stock oil...

V-Twin - Mid Control Kit Black W/ Gaskets & Footpegs fits '87-'93 FXR Model FXR mid control kit includes black foot peg mounts, polished brake pedal, primary insepction cover, chrome shifter and a chrome master cylinder Kit Includes: Factory...

V-Twin - Mid Control Kit Chrome W/ Footpegs fits '87-'93 FXR Model FXR mid control kit includes chrome bracket, pedal footpeg mounts, and stock driver footrests. Fitment: FXR 1987-1993

V-Twin - 35mm Triple Tree Set Chrome fits '82-'87 FXR Model 35mm FXR triple tree set features a chrome finish. Fitment: FXR 1982-1987

Colony - Cam Cover Acorn Hardware Kit fits '70-'99 Big Twin Models (Except Twin Cam) Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - 8707-6 Oil Pump Plug Kit fits '81-'84 Big Twin Models Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Drag Specialties - 30" Black Vinyl Throttle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 33-1/2" Black Vinyl Idle Cable (Repl. OEM #56337-83) Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for smooth operation and long life Length...

Drag Specialties - 30" Black Vinyl Idle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for...

Drag Specialties - Chrome 4-Piston Front Left Brake Caliper fits '84-'99 Big Twin Models (OEM #4404684) Features: Direct bolt-on design Calipers include brake pads and bleeder screws Not for Springer (front) or Deuce (rear). Pre-'00 applications...

DP - Heavy-Duty Clutch Kit fits '84-'99 Big Twin Models This HD clutch kit comes in a foam-lined hard plastic case which protects the clutch components from damage prior to installation. This case can be used to store and transport parts, tools or other...

V-Twin - York FXR Rear Chain Drive Kit fits '83-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth rear steel sprockets with a 120-link gold seal chain. It features a...

Jagg - Deluxe Diamond Cut Oil Cooler System This special edition oil cooler kit is as spectacular and durable as the gem it is named after. It is the perfect solution for Harleys with perimeter, vertical frame tubes. This cooler mounts to the left frame...

Wild 1 - Chubby® Savage 1-¼" Handlebars - Black These handlebars from Wild 1 are 1-1/4" in diameter, they are also 1-1/4" at the clamp and will need to be ran with 1-1/4" risers, such as the ones offered by Wild 1. Features Handlebars are...

Pro-One - Steering Stem Bolt fits '99-'05 FXD & '88-'22 Sportster Models (Except RH Sportster) Features: Replaces stock steering stem hardware Note: Replacement for Pro-One Triple Tree...

James Gasket - 35 mm Fork Seals fits 'L86-'87 Sportster Models (OEM #45387-83) Features: High-quality replacement components Available in dealer packs of ten (sold each) or in packs of two (sold as pairs) Made in the U.S.A...

James Gasket - 39 mm Fork Seals fits '99-'05 Dyna, 'L87-'22 Sportster Models (Except RH Sportster (OEM #45378-87)) Features: High-quality replacement components Available in dealer packs of ten (sold each) or in packs of two (sold as pairs) Made in...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone...

James Gasket - Intake Manifold Gasket Kit fits '66-'84 Shovelhead, '57-'78 Sportster Models w/ Bendix/​Keihin (Butterfly Style (OEM #27002-57)) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

James Gasket - EVO Top End Gasket Kit fits '84-'91 Big Twin Models (OEM #17033-83) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Made in the USA Kit Includes: MLS Head Gaskets RCM Cylinder Base...

James Gasket - Transmission Gasket Kit fits '80-'99 Big Twin Models 5-Speed w/o Integral Oil Tank (OEM #33031-85) Features: Made in the U.S.A. Fitment 2000 Harley-Davidson FXR 4 - - 1999 Harley-Davidson Softail Night Train...

James Gasket - Top End Gasket Kit fits '84-'91 Big Twin (Cork Rocker Gaskets (OEM #17033-83)) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Made in the USA Kit Includes: 0.045" Head Gaskets with...

James Gasket - Transmission Seal Kit fits '84-'93 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Made in the U.S.A. Fitment 1993 Harley-Davidson Wide Glide FXDWG - - 1993 Harley-Davidson Low...

Jims - 1748 Lockdown Axle Kit fits '99-'01 FLHT Model Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit more precisely into the end of the swingarm, providing...

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 2268 Main Case Seal Installer Tool fits '85-'06 5-Speed Big Twin & Aftermarket 6-Speeds Models Features: Ensures correct alignment, seal protection and depth when installing the seal Made in the...

Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide) Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...