V-Twin Manufacturing

V-Twin - 23-1/2" Hard Chrome 35mm Fork Tube Set fits '73-'74 Sportster & FX Model Features: This fork tube set is stock 35mm diameter X 23-1/2" long Before installing, compare new and old...

V-Twin - Chrome 35mm Fork Tube w/ 23-1/2" Length fits '73-'77 FX, '73-'74 Sportster Models (OEM #45977-73) Fork tube set is 23-1/2" stock length, Before installing, compare new and old tubes...

V-Twin - Chrome 35mm Fork Tube w/ 25-1/4" Length fits '75-'83 XLCH, '79-'82 XLS, '77-'83 FXS Models (OEM #45644-77) Fork tube set is 2" over stock length for XLH, XLXH, XLCR, 1983 XLX, XLS models...

V-Twin - 23-1/4" Hard Chrome 35mm Fork Tube Set fits '76-'83 FX, '75-'83 XLCH/XLH Models Features: Hard chrome fork tubes are Showa type with a stock length of 23-1/4" Before installing, compare...

V-Twin - Brake Pedal Polished Alloy fits '82-'94 FXR Model (OEM #42523-82) FXR brake pedal has a polished alloy finish and includes the bushings installed Note: Must order rod end, wave washer,...

V-Twin - Primary Gasket Kit fits '85-'94 FLT, '84-'93 FXR Models FXR/FLT Primary gasket kit is a three piece kit Fitment: FLT 1985-1994 FXR 1984-1993 Late 1984

V-Twin - Shifter Linkage Kit fits '81-'84 FXR Model FXR shifter linkage kit includes rod, heel toe shifter lever , shifter lever, V-Tech inspection cover and inner shifter lever. Fitment: FXR...

V-Twin - Shifter Sleeve Kit fits '84-'94 FXR Model FXR shifter sleeve kit includes a nylon sleeve, lock tab and 2 o-rings Note: The long sleeve goes between the two outer brass bushings - one is...

V-Twin - Shifter Rod Assembly fits '82-'94 FXR Model (OEM #33728-82A) FXR shifter rod assembly includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation...

V-Twin - Mid Control Kit fits '82-'86 FXR Model - Black Features: FXR mid control kit features a black peg brackets and polished brake pedal Factory style components for installation Order...

V-Twin - Mid Control Kit Black W/ Gaskets & Footpegs fits '87-'93 FXR Model FXR mid control kit includes black foot peg mounts, polished brake pedal, primary insepction cover, chrome shifter and...

V-Twin - Mid Control Kit Chrome W/ Footpegs fits '87-'93 FXR Model FXR mid control kit includes chrome bracket, pedal footpeg mounts, and stock driver footrests. Fitment: FXR 1987-1993

V-Twin - Mid Control Kit fits '83-'86 FXR Models - Chrome Features: FXR mid control kit features chrome mounts, chrome brake pedal and footpeg supports. factory style components for installation...

V-Twin - Rear Brake Plunger Zinc Plated fits '82-'87 FXR Model (OEM #42437-82) Zinc plated FXR rear brake plunger features a 5/16" x 24 thread and measures 2-7/8" from the hole to the end of the...

V-Twin - 35mm Triple Tree Set Chrome fits '82-'87 FXR Model 35mm FXR triple tree set features a chrome finish. Fitment: FXR 1982-1987

V-Twin - 39mm Triple Tree Set Polished fits '88-'03 Sportster, '88-'94 FXR Models 39mm FXR triple tree set includes a polished top and lower tree. Fitment: FXR 1988-1994 XL 1988-2003

V-Twin - Stock Kickstand Black fits '82-'90 FXR Model Features: Stock length kickstand features a black finish and is for FXR models Pin not included, must order separately Fitment: FXR...

V-Twin - Electrical Wiring Panel Set Black fits '86-'94 FXR Model Features: Black flat left and offset right FXR electrical wiring panel set Panels mount by 1/4"-20 well nuts and 1/4" x 20 x...

V-Twin - Fuel Petcock Alloy fits '82-'94 FXR Models Fuel petcock with 90° elbow features an alloy finish specifically designed for FXR models. Note: Petcock has a 5/16" fuel outlet...

V-Twin - Rear Axle Kit Zinc Plated fits '82-'94 FXR Model FXR rear axle kit includes zinc plated components and has a 3/4" diameter. Fitment: FXR 1982-1994

V-Twin - Dash Panel fits '95-'03 FXD, '88-'94 FXR Models (OEM #67185-88, 67189-95) This dash panel features a black or chrome finish. For FXD and FXR models, accepts 85MM GPS speedometers and...

V-Twin - Replica XL 2 Gallon Steel Gas Tank Raw fits '57-'78 Sportster Model Features the classic XR 750 style with raw steel construction. Specifications: Petcock located on the right side...

V-Twin - Black Harley Choke Cable Assembly (OEM #29229-88D) Choke cable assembly includes knob, casing, and inner wire featuring a black finish. Fitment: XL 1988-UP FLT 1993-2006 FLST...

V-Twin - Evolution Intake Manifold Conversion Kit (OEM #27019-83) Evolution intake manifold conversion kit converts stock rubber compliance fittings to a more rigid mount system. Includes flange set...

V-Twin - 14" Loopy Handlebars These are 1" handlebars with knurls and indents. Available in your choice of a black or chrome finish. XL 1982-UPFXD 1991-2017FX 1975-1985

V-Twin - Black V₂ Rocker Box Set fits '92-'99 Big Twin Models ViTwin's V₂ Rocker Box Set is an exact, machined die-cast cover. The set is complete with six pieces, including all of the necessary...

V-Twin - Black V₂ Rocker Box Set fits '84-'91 Big Twin Models ViTwin's V₂ Rocker Box Set is an exact, machined die-cast cover. The set is complete with six pieces, including all of the necessary...

V-Twin - Black Nose Cone Gear Cover fits '93-'99 Big Twin Models V-Twin's Nose Cone Gear Cover is designed to fit Big Twin Models. The bushings are installed and a seal is included. Fitment FXD...

V-Twin - Black Nose Cone Cam Cover fits '73-'93 Big Twin Models OEM #25268-84A V-Twin's Nose Cone Cam Cover is designed to fit Big Twin Models. The bushings are installed and a seal is included...

V-Twin - Chrome Alloy Racer Style Footpeg These are adjustable male end mount footpegs that have a racer design and alloy construction with a chrome finish. Features Can be made offset or inline...

V-Twin - Black Alloy Racer Style Footpeg Set These are adjustable male end mount footpegs that have a racer design and alloy construction with a black finish. Features Can be made offset or...

V-Twin - Polished Alloy Racer Style Footpeg Set fits '80 & Up FX and '86 & Up Sportster Models These are adjustable male end mount footpegs that have a racer design and alloy construction...

V-Twin - Swingarm Pivot Kit fits '86-'94 FXR Models This kit comes with four bearings, two aluminum spool spacers, a swing arm pin and two nuts. Features With dual ball bearings on each side...

V-Twin - York FXR Rear Chain Drive Kit W/ 5 Spoke Sprocket fits '82-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth...

V-Twin - York FXR Rear Chain Drive Kit fits '83-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth rear steel sprockets...

V-Twin - Black FXR Mid-Control Kit fits '82-'94 FXR Models V-Twin's replica black driver bracket set is designed to mount passenger style pegs. The set features a right mount bracket, a right...

V-Twin - Polished Replica Rear Fender Strut Set fits '87-'94 FXR Models This replica rear fender strut set has a polished finish. Fitment FXR 1987-1994

V-Twin - Polished Replica Rear Fender Strut Set fits '82-'91 FXR Models This replica rear fender strut set is constructed of aluminum and has a polished finish. Fitment FXR 1982-1986FXRT...

V-Twin - Black Replica Rear Fender Strut Set fits '82-'91 FXR Models This replica rear fender strut set is constructed of aluminum and has a black finish. Fitment FXR 1982-1986FXRT 1983-1991

V-Twin - York FXR Rear Chain Drive Kit fits '82-'99 FXR Model This Rear Chain Kit is designed for 5-speed models and comes with a 120-link nickel plated chain. The stock ratio is supplied 22-tooth...