V-Twin Manufacturing

Chrome aircraft style bolt in vented gas cap includes the trim ring. Gas cap comes complete with keys. Fits tanks with a 95mm opening.   Suggested to use with the following Vtwin Mfg...

S&S Shorty Carburetor Accent Kit Brass S&S shorty carburetor accent kit includes brass components. Carburetor is not included.   *NOTE: Petcock includes built in needle and...

V-Twin 6" Fuel Sight Tub This is a 6" long fuel sight tube unit. It must have steel dowels welded into place prior to tank surface finishing. Fitment Fits all models.

V-Twin - 12-Volt Wiring Outlet Receptacle Box This is a wiring outlet receptacle box designed for 12-volt cell phones, MP3 players or lighters. Features Unit has a 90-centimeter rubber-coated...

V-Twin - Chrome Alloy Racer Style Footpeg These are adjustable male end mount footpegs that have a racer design and alloy construction with a chrome finish. Features Can be made offset or inline...

V-Twin - Black Alloy Racer Style Footpeg Set These are adjustable male end mount footpegs that have a racer design and alloy construction with a black finish. Features Can be made offset or...

V-Twin - Polished Alloy Racer Style Footpeg Set fits '80 & Up FX and '86 & Up Sportster Models These are adjustable male end mount footpegs that have a racer design and alloy construction...

V-Twin - Anderson Stud Mount Brass Footpeg Set This Anderson brass footpeg set features original chopper style pegs with an original sand cast finish with mounting blocks. Features Stud has...

V-Twin - Anderson Clamp Style  Alloy Footpeg Set This clamp-on mount footpeg set features chopper style pegs with an original sand cast finish with clamps. Fitment All models with 1" frame...

V-Twin - Anderson Stud Mount Alloy Footpeg Set This stud mount Anderson footpeg set features chopper style pegs with an original sand cast finish with mounting blocks. Features Stud has 7/16" x...

V-Twin - Brass 1" Handlebar Riser Set V-Twin's handlebar riser set is built for use with 1" diameter handlebars. It has a custom short style with a solid brass billet and a contrast cut...

V-Twin - Chrome 1" Handlebar Riser Set V-Twin's handlebar riser set is built for use with 1" diameter handlebars. It has a custom short style with polished aluminum billet and a contrast cut...

V-Twin - Black 1" Handlebar Riser Set V-Twin's handlebar riser set is built for use with 1" diameter handlebars. It has a custom short style with black aluminum billet and a contrast cut...

V-Twin - Stainless Steel 1" Pullback Riser Set V-Twin's stainless steel riser set is designed to be used with 1" handlebars. It has a smooth casting polished finish. Fitment Custom...

V-Twin - Brass Sand 1" Pullback Riser Set V-Twin's brass sand riser set is designed to be used with 1" handlebars. It has a smooth casting polished finish. Fitment Custom application

V-Twin - Chrome Top Triple Tree fits 49mm Fork Tubes on '08-'17 Dyna Models This is a chrome aluminum top triple tree which accepts 49mm fork tubes on FXD models. Fitment FXD 2008-2017FXDB...

V-Twin - Swingarm Pivot Kit fits '86-'94 FXR Models This kit comes with four bearings, two aluminum spool spacers, a swing arm pin and two nuts. Features With dual ball bearings on each side...

V-Twin - Chrome Dash Panel fits '82-'92 FXR Models This FXR dash panel has a black finish and comes with holes to accommodate the fuel gauge and gas cap instruments. Suggested to use with #39-0242...

V-Twin Black Steel Side Cover Set Fits '84-'94 FXR/FXRS Models This set of side covers replaces OEM Part No. 66351-82. Features: Frame side cover set is constructed of steel and has a smooth...

V-Twin - 7" Headlamp Bracket fits '04 & Up Touring Models This headlamp bracket is designed for 7"-style headlamp units and has a smooth black finish. NOTE: This bracket is required for use...

V-Twin - Black 7" LED Headlamp Unit W/ Turn Signal fits '94-'13 Touring Models This unit comes with an LED turn signal ring. NOTES: Requires 31-0080 mounting bracket for installation on 1999-2013...

V-Twin - Chrome 52mm GPS Speedometer for V-Twin FXR Dash Panel V-Twin's GPS Speedometer measures 52mm and is instantly calculated via satellite signal. It features a chrome bezel and is fully...

V-Twin - York FXR Rear Chain Drive Kit W/ 5 Spoke Sprocket fits '82-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth...

V-Twin - York FXR Rear Chain Drive Kit fits '83-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth rear steel sprockets...

V-Twin - Black Dash Panel fits '82-'92 FXR Models This FXR dash panel has a black finish and comes with holes to accommodate the fuel gauge and gas cap instruments. Suggested to use with #39-0242...

V-Twin - Chrome Brake Pedal fits '82-'94 FXR Models V-Twin's FXR brake pedal features a chrome finish. NOTES: Includes the clevis with pin. For FXR mid control applications. Features OEM No.:...

V-Twin - Purple Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Green Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Blue Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Red Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Black FXR Mid-Control Kit fits '82-'94 FXR Models V-Twin's replica black driver bracket set is designed to mount passenger style pegs. The set features a right mount bracket, a right...

V-Twin - Polished Replica Rear Fender Strut Set fits '87-'94 FXR Models This replica rear fender strut set has a polished finish. Fitment FXR 1987-1994

V-Twin - Polished Replica Rear Fender Strut Set fits '82-'91 FXR Models This replica rear fender strut set is constructed of aluminum and has a polished finish. Fitment FXR 1982-1986FXRT...

V-Twin - Black Replica Rear Fender Strut Set fits '82-'91 FXR Models This replica rear fender strut set is constructed of aluminum and has a black finish. Fitment FXR 1982-1986FXRT 1983-1991

V-Twin - Pushrod Cover Kit fits Harley Twin Cam Models - Gold This titanium-plated pushrod cover kit features inner, lower and upper covers for Twin Cam engines. Fitment FLT 1999-2016FLST...

V-Twin - Pushrod Cover Kit fits Harley Evo Big Twins - Gold V-Twin's titanium stock-style pushrod cover kit is a 16-piece set with all of the necessary components for a complete installation for...

V-Twin - Bobber Hand Control Kit fits 1" Handlebars - Chrome Bobber hand control kit features a chrome finish. Kit includes the clutch and brake, for use with 1" handlebars. Master cylinder is...

V-Twin - Shorty Style Brass Riser Set fits 1" Handlebars Steel shorty style 2" riser set has a 1/2"-13 thread and brass finish.Set is cast solid. May have pits and marks from the hand casting...

V-Twin - Pushrod Cover Kit fits '66-'84 Harley Shovelhead This pushrod cover kit is titanium-plated and features the inner pushrod set, the lower pushrod cover set, a cover spring, a cover spring...

V-Twin - Chopper "Hummer" 2.5 Gallon Gas Tank This is a universal fit gas tank with front and rear mounting tabs and comes with a right side filler cap location, a fuel capacity of 2.5 gallons and...