V-Twin Manufacturing

V-Twin - Rocker Box Set fits '99-'17 Twin Cam Models This set comes with two upper covers and two lower housings. Available in your choice of a black or chrome finish. Fitment FLT 1999-2016FLST...

V-Twin - Black Nose Cone Gear Cover fits '93-'99 Big Twin Models V-Twin's Nose Cone Gear Cover is designed to fit Big Twin Models. The bushings are installed and a seal is included. Fitment FXD...

V-Twin - Black Nose Cone Cam Cover fits '73-'93 Big Twin Models OEM #25268-84A V-Twin's Nose Cone Cam Cover is designed to fit Big Twin Models. The bushings are installed and a seal is included...

V-Twin - Black Cam Cover fits '01-'17 Twin Cam Models OEM #25369-01A Please note this cam cover comes without a sensor hole. Fitment FXST 2001-2017FLST 2001-2017FXD 2001-2017FLT 2001-2016

V-Twin - Cam Covers fit '17 & Up M8 Models Available in your choice of a chrome, black or titanium finish. Fitment FLST 2018-UPFLT 2017-UPFXST 2018-UP

V-Twin - Saddlebag Guard Eliminator Brackets fits '97-'08 Touring Models Go from the frame to the lower support bracket and replace the saddlebag guards and upper saddlebag rails. Available in your...

Chrome aircraft style bolt in vented gas cap includes the trim ring. Gas cap comes complete with keys. Fits tanks with a 95mm opening.   Suggested to use with the following Vtwin Mfg...

S&S Shorty Carburetor Accent Kit Brass S&S shorty carburetor accent kit includes brass components. Carburetor is not included.   *NOTE: Petcock includes built in needle and...

V-Twin 6" Fuel Sight Tub This is a 6" long fuel sight tube unit. It must have steel dowels welded into place prior to tank surface finishing. Fitment Fits all models.

V-Twin - 12-Volt Wiring Outlet Receptacle Box This is a wiring outlet receptacle box designed for 12-volt cell phones, MP3 players or lighters. Features Unit has a 90-centimeter rubber-coated...

V-Twin - Chrome Alloy Racer Style Footpeg These are adjustable male end mount footpegs that have a racer design and alloy construction with a chrome finish. Features Can be made offset or inline...

V-Twin - Black Alloy Racer Style Footpeg Set These are adjustable male end mount footpegs that have a racer design and alloy construction with a black finish. Features Can be made offset or...

V-Twin - Polished Alloy Racer Style Footpeg Set fits '80 & Up FX and '86 & Up Sportster Models These are adjustable male end mount footpegs that have a racer design and alloy construction...

V-Twin - Anderson Stud Mount Brass Footpeg Set This Anderson brass footpeg set features original chopper style pegs with an original sand cast finish with mounting blocks. Features Stud has...

V-Twin - Anderson Clamp Style  Alloy Footpeg Set This clamp-on mount footpeg set features chopper style pegs with an original sand cast finish with clamps. Fitment All models with 1" frame...

V-Twin - Anderson Stud Mount Alloy Footpeg Set This stud mount Anderson footpeg set features chopper style pegs with an original sand cast finish with mounting blocks. Features Stud has 7/16" x...

V-Twin - Brass 1" Handlebar Riser Set V-Twin's handlebar riser set is built for use with 1" diameter handlebars. It has a custom short style with a solid brass billet and a contrast cut...

V-Twin - Chrome 1" Handlebar Riser Set V-Twin's handlebar riser set is built for use with 1" diameter handlebars. It has a custom short style with polished aluminum billet and a contrast cut...

V-Twin - Black 1" Handlebar Riser Set V-Twin's handlebar riser set is built for use with 1" diameter handlebars. It has a custom short style with black aluminum billet and a contrast cut...

V-Twin - Stainless Steel 1" Pullback Riser Set V-Twin's stainless steel riser set is designed to be used with 1" handlebars. It has a smooth casting polished finish. Fitment Custom...

V-Twin - Brass Sand 1" Pullback Riser Set V-Twin's brass sand riser set is designed to be used with 1" handlebars. It has a smooth casting polished finish. Fitment Custom application

V-Twin - Chrome Top Triple Tree fits 49mm Fork Tubes on '08-'17 Dyna Models This is a chrome aluminum top triple tree which accepts 49mm fork tubes on FXD models. Fitment FXD 2008-2017FXDB...

V-Twin - Swingarm Pivot Kit fits '86-'94 FXR Models This kit comes with four bearings, two aluminum spool spacers, a swing arm pin and two nuts. Features With dual ball bearings on each side...

V-Twin - Chrome Dash Panel fits '82-'92 FXR Models This FXR dash panel has a black finish and comes with holes to accommodate the fuel gauge and gas cap instruments. Suggested to use with #39-0242...

V-Twin Black Steel Side Cover Set Fits '84-'94 FXR/FXRS Models This set of side covers replaces OEM Part No. 66351-82. Features: Frame side cover set is constructed of steel and has a smooth...

V-Twin - 7" Headlamp Bracket fits '04 & Up Touring Models This headlamp bracket is designed for 7"-style headlamp units and has a smooth black finish. NOTE: This bracket is required for use...

V-Twin - Black 7" LED Headlamp Unit W/ Turn Signal fits '94-'13 Touring Models This unit comes with an LED turn signal ring. NOTES: Requires 31-0080 mounting bracket for installation on 1999-2013...

V-Twin - Chrome 52mm GPS Speedometer for V-Twin FXR Dash Panel V-Twin's GPS Speedometer measures 52mm and is instantly calculated via satellite signal. It features a chrome bezel and is fully...

V-Twin - York FXR Rear Chain Drive Kit W/ 5 Spoke Sprocket fits '82-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth...

V-Twin - York FXR Rear Chain Drive Kit fits '83-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth rear steel sprockets...

V-Twin - Black Dash Panel fits '82-'92 FXR Models This FXR dash panel has a black finish and comes with holes to accommodate the fuel gauge and gas cap instruments. Suggested to use with #39-0242...

V-Twin - Chrome Brake Pedal fits '82-'94 FXR Models V-Twin's FXR brake pedal features a chrome finish. NOTES: Includes the clevis with pin. For FXR mid control applications. Features OEM No.:...

V-Twin - Purple Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Green Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Blue Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Red Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Black FXR Mid-Control Kit fits '82-'94 FXR Models V-Twin's replica black driver bracket set is designed to mount passenger style pegs. The set features a right mount bracket, a right...

V-Twin - Polished Replica Rear Fender Strut Set fits '87-'94 FXR Models This replica rear fender strut set has a polished finish. Fitment FXR 1987-1994

V-Twin - Polished Replica Rear Fender Strut Set fits '82-'91 FXR Models This replica rear fender strut set is constructed of aluminum and has a polished finish. Fitment FXR 1982-1986FXRT...

V-Twin - Black Replica Rear Fender Strut Set fits '82-'91 FXR Models This replica rear fender strut set is constructed of aluminum and has a black finish. Fitment FXR 1982-1986FXRT 1983-1991