V-Twin Manufacturing

V-Twin - 51-1874 - Primary Nerf PlateDescriptionPrimary Nerf plate features stainless steel finish and manufactured with cast steel. Protect the outer primary on hard lean deft turns. Bolt on type...

V-Twin - 51-1873 - Primary Nerf plateDescriptionPrimary Nerf plate features stainless steel finish and manufactured with cast steel. Protect the outer primary on hard lean deft turns. Bolt on type...

V-Twin - 51-1356 - Nerf Engine Bar BlackDescriptionNerf engine bar features a black finish and is manufactured with 1-1/2" steel tubes.Engine bar is for Touring models and can only be mounted by...

V-Twin - 51-1346 - Black Front Engine BarDescriptionBar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic...

V-Twin - 51-1344 - Nerf Engine Bar ChromeDescriptionNerf engine bar features a chrome finish and is manufactured with 1-1/2" steel tubes. Engine bar is for Touring models and can only be mounted by...

V-Twin - 51-1221 - Black Front Engine BarDescriptionFront engine bar features a black finish.Does not fit models equipped with fairing lowers. Fits:FLT 1997-2008 except Road GlideAdditional...

V-Twin - 51-1122 - Chrome Front Engine BarDescriptionFront engine bar features a chrome finish. Fits:XG 2015-UPAdditional Information OEM No.49000015B UOM1 - EA FinishChrome LocationFront ...

V-Twin - 51-1088 - Right Rear StrutDescriptionRight side rear fender strut. Fits:FLT 2009-UPAdditional Information OEM No.47504-09 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 51-1040 - Replica 1936 Knucklehead FrameDescriptionReplica frame is an authentic reproduction of the factory style with 13 brazed joints. The 28  rake neck angle will accept inline spring...

V-Twin - 51-1006 - Replica Swingarm FrameDescriptionReplica swingarm frame is our authentic reproduction of FLH style to accept a Panhead or Shovelhead engine, 4-speed transmission, seat post, and...

V-Twin - 51-0987 - Chrome Front Engine BarDescriptionEngine bar features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique...

V-Twin - 51-0982 - Weld-On Frame HardtailDescriptionWeld on hardtail with weld on bracket for stock frames with 2000-UP disc brake.The adjuster block are on the outside of the rear axle plate and are...

V-Twin - 51-0979 - Frame Swingarm ChromeDescriptionChrome frame swingarm.Order pivot kit separately. The width of the inner diameter where the axle goes measures 9-7/8". From the cente rof the axle...

V-Twin - 51-0978 - Swingarm ChromeDescriptionChrome swingarm for Softail models.Swingarm includes spherical bearings installed. Not for use on 2006-2007 FXST and 2007-up FLSTF. ...

V-Twin - 51-0901 - Chrome Front Engine BarDescriptionChrome front engine bar features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique...

V-Twin - 51-0899 - Black Front Engine BarDescriptionEngine bar with 1" tubing.Order U-clamp separately. WARNING: This engine/frame bar may provide...

V-Twin - 51-0898 - Black Rear Frame SwingarmDescriptionRear frame swingarm is black and is for 4-speed rear chain drive models. Bearings and races are not included.Measures 12.250" from center of...

V-Twin - 51-0897 - Front Engine Bar ChromeDescriptionEngine bar features 1-1/4" tubing.Includes bolts. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under...

V-Twin - 51-0896 - Chrome Front Engine BarDescriptionEngine bar features 1" tubing for use on early wishbone frames.Order U-clamp separately. WARNING:...

V-Twin - 51-0895 - Chrome Rear Big Twin Frame BarDescriptionRigid frame bar for the rear with 7/8" tubing features a chrome finish.WARNING: This engine/frame bar may provide limited leg and cosmetic...

V-Twin - 51-0889 - Black Rear Big Twin Frame BarDescriptionRigid frame bar for the rear with 7/8" tubing features a black finish.WARNING: This engine/frame bar may provide limited leg and cosmetic...

V-Twin - 51-0883 - Chrome Front Engine BarDescriptionEngine bar features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique...

V-Twin - 51-0874 - Frame Top Engine MountDescriptionFrame top engine mount is two halves with seat tee and rear tank mounts incorporated into the top mount.Weld in place for accurate restoration. ...

V-Twin - 51-0634 - Billet Axle Cover SetDescriptionBillet axle cover set for Wide Glide frames. Fits:Custom application for Chopper and Softail framesAdditional Information UOM1 - SET ...

V-Twin - 51-0609 - Front Engine Bar SpacerDescriptionFront engine bar spacer will fit wishbone frames. Fits:FL 1948-1953Additional Information OEM No.49059-48 UOM1 - SET ManufacturerV-Twin ...

V-Twin - 51-0575 - Cable Mount Frame TabDescriptionCable mount frame tab is for under tank. Fits:FL 1955-1972Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeRigid 2025...

V-Twin - 51-0520 - Frame Neck without CupsDescriptionBig Twin neck forgings machined to accept stock diameter tubing with 30  rake.Includes key lock tab and right hand number boss forged in neck...

V-Twin - 51-0500 - Side Car Mount SetDescriptionReplica 1936 style raw steel frame side car mount set is for attachment by brazing.This mount set can also be used on custom frames by welding. Fits:EL...

V-Twin - 51-0424 - Clear WindshieldDescription10" clear Batwing fairing windshield.Reduces helmet buffeting while allowing a view unobstructed by dirt, bugs and raindrops. Constructed of hardcoated...

V-Twin - 51-0423 - Clear WindshieldDescription10" clear Batwing fairing windshield.Reduces helmet buffeting while allowing a view unobstructed by dirt, bugs and raindrops. Constructed of hardcoated...

V-Twin - 51-0392 - D+D Rigid FrameDescriptionD+D rigid frame is constructed of heavy gauge steel tubing for 1973-84 Shovelhead engines. Frame features 30 degree rake, zero stretch, 1-1/2" outer...

V-Twin - 51-0295 - Beaded WindshieldDescriptionBeaded windshield is 21-3/4" tall and is for 1967-2010 Sidecars.Installation hardware not included, must be ordered separately. There are 5 mount holes...

V-Twin - 51-0088 - Replica Wishbone Rigid FrameDescriptionExact Replica of the original style frame only updated to accept flat side tanks. Frame has many options for the look you want!Frame will...

V-Twin - 51-0058 - Frame Dowel SetDescriptionSolid steel frame dowel set is for the installation of hardtails.Outer diameter on small end is .7225 and large end is .8375. *NOTE: Must be welded in...

V-Twin - 51-0046 - Rear Motor Mount CastingDescriptionRear motor mount casting features an investment cast construction and is for rigid frames. Fits:XL 1982-2003Additional Information UOM1 - EA ...

V-Twin - 50-1764 - Rear Fender Brace ZincDescriptionRear fender brace features a zinc finish. Fits:Custom applicationAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 50-1577 - Spring Fork Fender KitDescriptionFender kit includes 6" wide front fender shell and bracket.Bracket is black finish, hardware not included. Fender must be drilled before...

V-Twin - 50-1566 - Front Fender BraceDescriptionFender bracket mounts to the front fork leg at shock mount holes.Bracket for Bobber front fender may be installed on front or rear of front spring fork...

V-Twin - 50-1294 - FXD Rear FenderDescriptionFXD rear fender is full length type and accepts stock tail lamp. Mounts to existing struts.May require additional holes for specific applications...

V-Twin - 50-0934 - Tool Box KitDescriptionTool box kit includes chrome oval tool box with 2 keys, zinc plated mount bracket and liner.Bracket will mount tool box on left side in rear of outer primary...