Wild 1 - Adjustable Digital Gauge Mount fits M8 Softail Models Relocate your M8 Softail digital gauge with this adjustable gauge mount from Wild 1. Features: Adjusts to the perfect angle for each rider Allows use of 1-1/4” T-Bars as well as...

Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch engagement and holding Both kit clutch plate stack height...

Belt Drives Ltd. - BDLPCP-0007 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '90-'97 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive plates...

Belt Drives Ltd. - BDLPCP-0013 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '98 Big Twin Models Features: Complete replacement clutch plate kit Include all friction plates, drive plates and backing plates...

Belt Drives Ltd. - BDLPCP-0005 Replacement Clutch Kit for Rivera Primo Pro Clutch fits 'L84-'89 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive...

Belt Drives Ltd. - 2" Drive Belt fits '00-'06 FXST/​FLST Models Features: Ball-bearing lockup clutch provides approximately 60% more surface contact area than the stock clutch for smooth, sure power transfer Kit includes motor plate, starter...

Belt Drives Ltd. - 2" Drive Belt fits '07-'17 Softail w/ Mechanical Clutch (Except FXSB/SE, FXCW/C) & '06-'17 Dyna w/ Forward Controls Features: Ball-bearing lockup clutch provides approximately 60% more surface contact area than the stock clutch...

Belt Drives Ltd. - 1-5/8" Belt Drive fits '99-'06 FLT/​FLHT/​FLHR/​FLHX/​FLTR Models Features: 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of two half plates, four full plates and five steel drive...

Belt Drives Ltd. - 3" Belt Drive fits '00-'06 FXST/​FLST Models Features: 3" electric start kits include front pulley, belt, clutch hub and clutch basket and aramid clutch set (consists of two half plates, four full plates and five steel drive...

Belt Drives Ltd. - 3" Electric Start 8mm Belt Drive with Lock-Up Clutch fits '86-'89 FXST/​FLST Models Features: 3" electric start kits include front pulley, belt, clutch hub and clutch basket and aramid clutch set (consists of two half plates, four...

Belt Drives Ltd. - 2" SS Belt Drive Without Cover fits '00-'06 FXST/​FLST Models Features: Beautiful styling and awesome performance 2" drive features a one-piece billet motor plate Clutch design eliminates clutch dogs and features an internal...

Belt Drives Ltd. - 1-5/8" Belt Drive Kit fits '00-'06 FXST/​FLST & '99-'05 Dyna Models Features: 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of two half plates, four full plates and five steel...

Belt Drives Ltd. - 2" Black Drive Belt fits '00-'06 FXST/​FLST Models Features: Use BDL's ball-bearing lockup clutch for positive clutch engagement and ease of shifting Kit includes a aramid 142-tooth drive belt, motor plate, starter housing and...

Belt Drives Ltd. - Belt Drive Kit fits '07-'17 FXST/​FLST/​FXS/​FLS with Mechanical Clutch (Except FXSB/SE, FXCW/C) Features: The EVB drive is one of BDL's original closed primary belt drives 52 tooth front pulley 69 tooth rear pulley 1-1/2" wide...

Belt Drives Ltd. - 2.75" Drive Belt fits '07-'17 Softail with Mechanical Clutch (Except FXSB/SE, FXCW/C) & '06-'17 Dyna w/ Forward Controls Features: Feature BDL's ball-bearing lockup clutch with ring gear Kit includes motor plate, 52-tooth...

Belt Drives Ltd. - 2" Black Belt Drive Kit fits '00-'06 FXST/​FLST Models Features: 2" drive kits loaded with style to accommodate custom trends All-billet construction with a unique top guard that provides long-lasting service and...

Belt Drives Ltd. - 2" Black Belt Drive Kit fits '07-'17 Softail (Except FXSB/SE, FXCW/C) & '06-'15 Dyna w/ Mechanical Clutch and Forward Controls Features: Features a two-piece motor plate design and 2" primary belt 52/69 pulley combination for...

Belt Drives Ltd. - 2" Black Drive Belt fits '18-'20 Softail Models (Except FLFB/​FXFB/​FXBR/​FXDRS) Features: Features a two-piece motor plate design and 2" primary belt 52/69 pulley combination for a 1.32:1 final drive ratio Belt profiles are...

Kraus - Black Anodized Pro-Line Slider Derby Cover fits Twin Cam Models The Kraus Pro-Line Slider Derby Cover is a direct replacement for your stock derby cover. This isn't your normal dress up cover. It has a Delrin Slider so when you're deep in that...

Saddlemen - Saddlebag Liners fits '22-'24 FXLRST Model Features: Standard soft saddlebag liner bag is contoured to fit neatly Unique design stores flat when empty and features a full length zipper opening for easy access to gear Made from light,...

Namz - Coil Cover fits FXR Models Features: Unique 180° radius design, highly polished and extra deep top mounting flange to allow custom spacers Simple to install Made in U.S.A. Fitment 2000 Harley-Davidson FXR...

Cycle Electric Inc - Harley-Davidson® Stator fits '14-'22 Sportster Models (Except RH Sportster (OEM #299000-26)) Features: Designed for direct OEM replacement Made in the U.S.A. Fitment 2022 Harley-Davidson Softail Low Rider ST...

Feuling - Hydraulic Camchain Tensioner Kit fits '17 & Up M8 Model Features: Install or replace hydraulic camchain tensioners on stock M8 models Kit includes out chain, outer crank 17 tooth crank sprocket, replacement camchain pad and pin, and...

Feuling - 487 Series Chain Drive Reaper® Camshaft fits M8 Model Features: Good for 4.25" stroke with 114"-117" engine looking for an agressive bolt in Produces a wide powerband Responds very well to increased bore and/or compression, exhaust...

Colony - 9653-4 3/8-16 x 3/8-24 Transmission Stud for '36-'83 4-Speed (STD.) (OEM #34724-36) Features: Studs are heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - 8752-19 Chrome Transmission Side Cover Cap fits '66-'85 Big Twin Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Colony - 8400-8 Chrome Rocker Shaft End Cap fits '66-'84 Big Twin & '57-'70 Sportster Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Headwinds - Black Headlight Mount fits FXDWG Extension Arm, 1-7/8” Forward Offset & 7/16” Drop Features: Precision-machined T-6 billet aluminum Made in the U.S.A. Fitment: 1993-2006 Harley-Davidson Wide Glide...

Headwinds - Chrome Headlight Mount fits Extended FXSTS, Lowers and Extends Light Out Features: Precision-machined T-6 billet aluminum with a chrome or black finish Blocks are machined 3/4" wide to fit most headlights and spotlights Made in the U.S...

Colony - 8610-1 5/8"-18 Crankcase/Oil Tank Hex Timing Plug fits '86-'95 Sportster Models (OEM #2326-26) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug...

Colony - 9002-4 Cap-Style Head Bolt Cover fits '84-'E85 Evolution Big Twin Models Features: Cover the unsightly factory 12-point headbolts; come complete with setscrews 7/16" size Fitment 1985 Harley-Davidson Fat Bob...

Colony - 8703-2 Relief Valve Plug Kit fits '81-'84 Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - 8794-10 7/8" Torx/Button-Head Brake Rotor Mounting Hardware Kit w/ Nuts fits '99-'23 FXST/​FLST/FXWG (OEM #3655) Features: Brake rotor, sprocket and belt mounting kits Available to fit virtually all H-D brakes, chain and belt...

Paul Yaffe's Bagger Nation - Inner Fairing fits '22-'24 FXLRS Model For use with M8 Softail digital instrument module Whether you’re looking to shave your tank or install one of our killer Dimple Die or Tear Drop Dash kits,...

Colony - 41694-08 1.48" x .375" Wheel Spacer w/ 25mm Diameter fits '08-'17 FXST/​FLST/​FXS/​FLS Models (OEM #41694-08) Features: Steel construction, polished, then chrome-plated Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat...

Colony - 3134-4 Jiffy Stand Mounting Kit fits '07-'23 Softail, '98-'22 Sportster & '02-'17 VRSC Models (Except RH Sportster Models (OEM #50003-89B) Features: Zinc plated 50003-89B pin, 554A clip, washers, and 53158-98 (53176-08) bushings as...

Colony - 9884-20 Zinc Motor Case Bolt Kit fits '96-'98 Evolution Big Twin Models (OEM #3398, 3504A) Features: Includes all necessary hardware for bolting together the motor case Made in the U.S.A. Replacement Part for...

Colony - 9401-1 Aluminum Transmission Plug fits '58-'80 Big Twin Models (OEM #701A) Features: Chrome-plated, cad or brushed aluminum fill plugs For 4-speed transmission models Made in the U.S.A. Fitment 1980 Harley-Davidson Wide Glide...

Colony - 8476-4 Cap Nut Dash Mounting Hardware Kit fits '77-'85 FX Model Features: Chrome plated dash mounting button allen kit Made in the USA Fitment 1983-1985 Harley-Davidson Low Rider...

Kibblewhite - Saddlebag Stabilizer fits '22-'23 FXLRST -Black Anodized Features: Solves the problem with the lack of mounting support in OEM saddlebags Reduce shaking and vibration due to high speeds Saddlebag stabilizer creates a direct link...