- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser)
Jims
$108.95Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as install cups in the frame This tool pulls the races...$108.95 -
Out of stock
Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models
Jims
$367.95Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...$367.95 -
Out of stock
Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models
Jims
$171.95Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings. Fitment 2006 Harley-Davidson Street...$171.95 -
Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models
Jims
$136.95Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 2002 Harley-Davidson Softail Fat Boy EFI...$136.95 -
Out of stock
Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models
Jims
$217.95Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case Can be used without removing transmission from the bike Made in the U.S.A...$217.95 -
Jims - 2256 Drive Gear Seal Installation fits All 5-Speed Big Twin Models
Jims
$155.95Jims - 2256 Drive Gear Seal Installation fits All 5-Speed Big Twin Models Features: Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be used to protect main drive...$155.95 -
Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models
Jims
$73.95Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...$73.95 -
Jims - 2246 Timken® Bearing Race Installer fits '69-'02 Big Twin, '77-'03 Sportster & '82-'02 Buell Models
$385.95Jims - 2246 Timken® Bearing Race Installer fits '69-'02 Big Twin, '77-'03 Sportster & '82-'02 Buell Models Features: Used to install bearing race straight into the left crankcase A must for late-model cases Made in the U.S.A...$385.95 -
Out of stock
Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models
Jims
$46.95Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models Features: Removes oil screen without removing exhaust Used to remove the tappet oil screen plug Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...$46.95 -
Out of stock
Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models
Jims
$112.95Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor cases Made in the U.S.A...$112.95 -
Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models
Jims
$161.95Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models Features: Designed to press oil seal over sprocket shaft into case Made in the U.S.A. Fitment 2010 Harley-Davidson Street Glide Trike...$161.95 -
Out of stock
Jims - 37047-91-6 2.5" Sprocket Shaft Bearing Optional Sleeves fits '77-'03 Sportster Models
Jims
$58.95Jims - 37047-91-6 2.5" Sprocket Shaft Bearing Optional Sleeves fits '77-'03 Sportster Models Features: For use on specific Harley-Davidson® Sportster and Buell® model years Optional sleeves for JIMS® Sprocket Shaft Bearing Installation...$58.95 -
Out of stock
Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models
Jims
$370.95Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models Features: Installs the main drive gear without removing the transmission Used to remove and install the main drive gear Made in the...$370.95 -
Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models
Jims
$363.95Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...$363.95 -
Out of stock
Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models
Jims
$97.95Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a one-ton press Install...$97.95 -
Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models
Jims
$197.95Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models Features: This tool will install “Round Circlip” rings in one easy step without distorting ring, for the safest wrist pin retention...$197.95 -
Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84)
Jims
$82.95Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...$82.95 -
Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin
Jims
$42.95Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin Features: Use to check rod straightness without removing the rods from the cases Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...$42.95 -
Out of stock
Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70))
Jims
$77.95Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking...$77.95 -
Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam)
Jims
$651.95Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to early '84 idler gear bushing) Designed to line-ream...$651.95 -
Out of stock
Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam)
Jims
$149.95Jims - 1041-TC Camshaft Cover Holder Tool fits '70-'99 Big Twin Models (Except Twin Cam) Features: Holds cam cover flat and helps prevent damage/scratches when removing and installing bushings Clamps in vice or Bridgeport™ mill Made in the U...$149.95 -
Out of stock
Jims - 95724-57 Tappet Guide Puller Tool fits '57-'85 Sportster Models
Jims
$67.95Jims - 95724-57 Tappet Guide Puller Tool fits '57-'85 Sportster Models Features: Used to remove press-fit tappet guides from crankcase Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000...$67.95 -
Out of stock
Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R)
Jims
$197.95Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from crankcase Made in the U.S.A...$197.95 -
Jims - 1280 Camshaft Bearing Puller fits '99-'06 Twin Cam (Except '06 Dyna) for Removal of Bearings, 'L00-'06 FXST/FL & 'L00-'05 FXD for Removal of Front Cam Bearing
Jims
$351.95Jims - 1280 Camshaft Bearing Puller fits '99-'06 Twin Cam (Except '06 Dyna) for Removal of Bearings, 'L00-'06 FXST/FL & 'L00-'05 FXD for Removal of Front Cam Bearing Features: Once the camshafts are removed from the support plate this tool will...$351.95 -
Jims - 1275 Crankshaft Bearing Tool fits '99-'02 Twin Cam “A” Motors
Jims
$279.95Jims - 1275 Crankshaft Bearing Tool fits '99-'02 Twin Cam “A” Motors Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in the U.S.A...$279.95 -
Jims - 74437-96 Electronic Speedometer Sensor fits '00-'06 Softail Models (OEM #74430-00, 74430-00D, 74437-96)
Jims
$194.95Jims - 74437-96 Electronic Speedometer Sensor fits '00-'06 Softail Models (OEM #74430-00, 74430-00D, 74437-96) Features: Top-quality replacement sensor Also works on any aftermarket transmission case with a speedometer sensor hole Includes O-ring,...$194.95 -
Jims - 955 Gauge for Harley-Davidson Injection Pressure fits '01-'20 Big Twin Models w/ Delphi EFI (Except '18-'20 Softails)
Jims
$638.95Jims - 955 Gauge for Harley-Davidson Injection Pressure fits '01-'20 Big Twin Models w/ Delphi EFI (Except '18-'20 Softails) Features: Includes all necessary parts to diagnose Delphi fuel injection; a large gauge assembly, 8" hose, 2" hose, fuel tank...$638.95 -
Out of stock
Jims - 5831 Socket Fork Castle Nut fits '18-'20 FLSB/FXFB Models
Jims
$116.95Jims - 5831 Socket Fork Castle Nut fits '18-'20 FLSB/FXFB Models Features: Socket adapts wrench to remove castle nuts and access shock cylinder Made in USA Fitment 2019 Harley-Davidson FXDR...$116.95 -
Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames)
Jims
$130.95Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and installs steering head bearing race on 84-16 Big Twin...$130.95 -
Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models
Jims
$296.95Jims - 96600-36B Valve Spring Compressor Tool fits '36-'04 Big Twin & '57-'03 Sportster Models Features: Comes with new valve collar receiver for safer tool usage, and can be clamped in vice Hardened ball bearing style tip at valve head end...$296.95 -
Out of stock
Jims - 97273-60 Camshaft Bearing Tool fits '57-'90 Sportster, '87-'90 Buell Models
Jims
$103.95Jims - 97273-60 Camshaft Bearing Tool fits '57-'90 Sportster, '87-'90 Buell Models Features: Use to install inner cam bearings Made in the U.S.A. Fitment 1988-1990 Harley-Davidson Sportster 1200...$103.95 -
Jims - 94547-80B Sprocket Shaft Bearing Race Tool fits '77-'03 Sportster, '94-'02 Buell Models
Jims
$112.95Jims - 94547-80B Sprocket Shaft Bearing Race Tool fits '77-'03 Sportster, '94-'02 Buell Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor...$112.95 -
Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models
Jims
$295.95Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing Made in the U.S.A...$295.95 -
Out of stock
Jims - 97081-54 Sprocket Shaft Bearing Press Tool fits '55-'76 Sportster Models
Jims
$275.95Jims - 97081-54 Sprocket Shaft Bearing Press Tool fits '55-'76 Sportster Models Features: Use on '55-'76 XL and K models to install the flywheel assembly into the left crankcase Timken® bearing Optional sleeves sold separately for use on '86-'03...$275.95 -
Out of stock
Jims - 35820-86 Transmission Gear Spacing Tool fits '86-'90 Sportster, '87-'90 Buell Models
Jims
$77.95Jims - 35820-86 Transmission Gear Spacing Tool fits '86-'90 Sportster, '87-'90 Buell Models Features: Used to align main and countershafts when checking proper gear spacing Made in the U.S.A. Fitment 1988-1990 Harley-Davidson Sportster...$77.95 -
Out of stock
Jims - 97178-71 Clutch Spring Compressor fits '71-'E84 Sportster Models (OEM #97178-71)
Jims
$192.95Jims - 97178-71 Clutch Spring Compressor fits '71-'E84 Sportster Models (OEM #97178-71) Features: Used to remove or install clutch components Made in the U.S.A. Fitment 1983-1984 Harley-Davidson Sportster 1000...$192.95 -
Out of stock
Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84)
Jims
$61.95Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...$61.95 -
Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna)
Jims
$338.95Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press cases apart and break sealant bond Some case pressing will...$338.95 -
Out of stock
Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73)
Jims
$77.95Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...$77.95 -
Out of stock
Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R)
Jims
$77.95Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit...$77.95