V-Twin - 1.6KW Chrome Replacement Starter Motor fits '18-Up FLST/FXST Model (OEM #314000-57) Direct replacement starter motor is 1.6kW field wound permanent magnet type and features a chrome finish. Chrome units have all aluminum parts polished and...

AEE - Black Gloss Mid Control Set fits '18-'23 FXFBS , '18-'21 FLSB, '19-'20 FXDRS Models (OEM #505020-40) AEE Mid Control Set features a gloss black finish.Requires the separate purchase of OEM #50502041 Accessory Mid-Control Shift Side. Use stock...

V-Twin - Black Softail Rear Caliper Bracket fits '87-'99 FLST/FXST Model (OEM #44207-87) Softail rear caliper bracket features a black finish. Fitment: FLST 1987-1999 FXST 1987-1999

V-Twin - 3/8 NPT-22MM Petcock Nut fits '86-'17 FLST/FXST, '75-'95 Sportster Models (OEM #622-83N) Brass 1/4 NPT-22MM petcock nut only Fitment: FX 1975-1984 FL 1975-1984 FXR 1982-1994 FXD 1991-2017 XL 1975-1995 FLST 1986-2017 FXST 1984-2017

V-Twin - Oil Pump Plug fits '84-'98 FXST, '82-'94 FXR, '57-'76 Sportster Models Oil pump plug. Fitment: FXST 1984-1998 UL 1937-1948 FXR 1982-1994 FLT 1979-1998 FX 1971-1984 EL 1936-1940 FL 1941-1984 WL 1929-1952 FXD 1991-1994 XL...

V-Twin - Chrome Curvado Exhaust Header Set fits '87-'17 FXST/FLST Models Chrome curvado exhaust header pipes set includes 1-3/4" front and rear header pipes as shown, slash cut ends without heat shields Fitment: FXST 1987-2017 FLST 1987-2017

V-Twin - TC-88 Finned Rocker Box Set fits '99-'16 FLT/ FL, '99-'17 FLST/FXST Models TC-88 finned rocker box set features a chrome finish. Fitment: FLT 1999-2016 FL 1999-2016 FLST 1999-2017 FXST 1999-2017

V-Twin - Mid Control Shifter Shaft fits '89-Up FXST/FLST, '81-Up Sportster Models Softail mid control shifter shaft is the cross over type, used to route over inner primary to connect to shifter linkage. For mid shifter control. Shaft has splined...

Jims - 16-2320 M8 Primary Locking Tool fits '18-Up FLST/FXST Models Jims primary locking tool is used to lock the primary for service work on M8 models. Fitment: FLST 2018-UP FXST 2018-UP

V-Twin - Black Die Cast Tank Trim Cover fits '84-'99 FXST Model Black die cast tank trim cover replaces existing rubber divider on models with die cast dash. Includes cushion tape for underside to protect gas tanks. Fitment: FXST...

V-Twin - Brake Pedal Shaft fits '86-'17 FXST/FLST Models Softail foot brake pedal shaft with splined end. For mid control brake and pedal kit. Pedal shaft is splined to accept footpeg mount. Drilled and tapped for 3/8" x 16 thread Fitment: FXST...

V-Twin - Passenger Footpeg Set fits '18-Up FLST/FXST Models Passenger footpeg set with a female clevis features an alloy finish. The length from the center of the clevis bolt to the end is 100mm. Sold asset of two. Fitment: FLST 2018-UP FXST...

Colony - 9953-10 Acorn Screw Kit fits '99-Up FXST/FLST/FLT & '99-'17 FXD Models Acron screw kit for TC-88 points cover. Fitment: FXST 1999-UP FLST 1999-UP FLT 1999-UP FXD 1999-2017

V-Twin - Intake Manifold Seal Kit fits '90-'17 FLST/FXST, '88-'06 Sportster Models Manifold seal kit is to reseal late model manifolds with CV carburetor Fitment: FLST 1990-2017 FXD 1991-2017 FXST 1990-2017 XL 1988-2006 FLT 1990-UP

V-Twin - 24-9/16" Overall Length Black Brake Pedal Plunger fits '03-'17 FXDWG Model (OEM #41955-03A) Black brake pedal plunger has an overall length of 24-9/16". Fitment: FXDWG 2003-2017 Measurements: Overall Length: 24-9/16" End to Center...

GMA - Rear 2 Piston Caliper and 11-1/2" Disc Kit fits '84-'86 FXWG/FXST Models Kit includes a GMA 2-piston caliper with bracket and a 11.5" polished stainless disc with mount bolts. Note: UPS may consider this part as packaged "oversize" for...

V-Twin - AEE Foot Shifter Kit fits '79-'84 FX/FL, '86-'99 FXST/FLST Models AEE foot shifter kit for 1 up 3 down shifting. Includes threaded rod with 5/16"x24 threads on each end. Shorty control set, pedal requires less reach than...

V-Twin - Brake Shifter Mid Control Kit fits '18-Up FXFBS/FXFB/FLSB/FXDRS Models (OEM #505020-40R 505020-41L) Mid control kit includes brake and shifter kit. Kit places the shifter and brake foot controls from a forward to mid control location on the...

V-Twin - Chrome Grate Brake Small Pedal Pad fits '84-'17 FXST, '18-Up FXBRS/FXBR/FLSB Models Grate style brake pedal pad is the small type featuring a chrome plated finish. Surface has raised knubs for better grip and self-cleaning Fitment: FXBRS...

V-Twin - M8 3.6 Raw Steel Gallon Gas Tank fits '18-Up FLST/FLT/FXST Models Gas tank is one piece and has a fuel capicity of 14 liters, featuring a raw finish for M8 models. Includes an alloy screw in type type vented gas cap. Check the tank for...

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve port on oil pumps. Used as an oil pressure indicator...

V-Twin - Black Outer Headlamp Trim Rim fits '18-Up FLHCS/FLSL/FLHC/FLDE/FLSB Models (OEM #614005-73) Black stock type outer headlamp trim rim is used on headlamps with a 7" diameter. Clips are included. Mounts the same as stock ring for easy...

V-Twin - M8 Frisco Front Fender fits '18-'24 FLST/FXST Model Frisco front fender is for M8 fat body models featuring a raw finish. Short and quick bolt on installation, requires seat change. Fitment: FLST 2018-2024 FXST 2018-2024

V-Twin - 107" Big Bore Twin Cam Cylinder Kit fits '99-'06 FLST/FXST/FLT/FXD Model 107" Twin Cam big bore cylinder kit includes 10.5:1 piston kit and steel cylinders with black finish. Requires case machining and fits a 4" stroke flywheel...

V-Twin - Electronic Speedometer Assembly fits '96-'03 FXST/FLHR/FLST/FXDWG Model (OEM #74461-03A) Electronic speedometer with tachometer. Certain years and models will require separate purchase of correct wiring harness and tachometer adapter...

V-Twin - Exhaust Support fits '95-'99 FXST Model (OEM #65459-95) - Chrome Chrome exhaust support mounts stock or custom drag pipes to frame. Fitment: FXST 1995-1999

V-Twin - 7" Round Air Cleaner Assembly fits '18-Up FLST/FXST, '17-Up FLT Models - Chrome 7" M8 round air cleaner assembly features a chrome finish. Fitment: FLST 2018-UP FLT 2017-UP FXST 2018-UP

V-Twin - 8" Round Air Cleaner Assembly fits '18-Up FLST/FXST, '17-Up FLT Models - Chrome 8" M8 round air cleaner assembly features a chrome finish. Fitment: FLST 2018-UP FLT 2017-UP FXST 2018-UP

Daytona Twin Tec - Fuel Injection Electronic Control Module Kit fits '14-'17 Softail Models Features: Includes wide-band 18 mm oxygen sensors, 18 mm sensor bungs and sensor cables, USB-C cable and USB-C to A adapter, PC Link Software and...

Daytona Twin Tec - Fuel Injection Electronic Control Module Kit fits M8 Softail Models Features: Includes wide-band 18 mm oxygen sensors, 18 mm sensor bungs and sensor cables, USB-C cable and USB-C to A adapter, PC Link Software and...

Kodlin - Fastback Risers - fits '18-'23 M8 Softail With Digital Gauge Features: CNC-machined from billet aluminum Stainless hardware and zip ties included Fitment 2022-2024 Harley-Davidson Softail Low Rider ST...

Drag Specialties - Starter Drive Clutch fits '06 Dyna, '07-'17 Twin Cam Models (OEM #31632-06, 31633-07) Features: High-quality components to repair common failures of OEM Harley starters Designed to improve clutch life under hard starting...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '07-'17 FLST/C/F/N (w/o ABS) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings installed and...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2.15” fits '07-'17 Softails (w/o ABS) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings installed...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '08-'17 FXD Model (w/o ABS) (Single Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2.15” fits '08-'17 FXD (w/o ABS) (Single Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings...

Drag Specialties - 40 Spoke Black Laced Wheel 21” x 2.15” fits '00-'06 FXST/B/C, '00-'05 FXDWG (OEM #43671-00, 43700-00) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and...

Drag Specialties - 40 Spoke Black Laced Wheel 16” x 3” fits '86-'99 FLST/C/F/N (OEM #43005-86) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings...

Drag Specialties - 40 Spoke Black Laced Wheel 21” x 2.15” fits '00-'03 FXD/B/C/L, '00-'05 XL (Single/​Dual Disc (OEM #43557-00, 43557-00A)) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...

Drag Specialties - 40 Spoke Black Laced Wheel 21” x 2.5” fits '99 FXD, '86-'99 XL (Single or Dual Disc (OEM #43557-87)) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and...