V-Twin - 38-1280 - Emblem Mount Screws for Gas TankDescriptionGas tank emblem 18-8 stainless steel screws are oval head type countersunk with a 6-32 thread and 1/4" length.Slightly shorter than OE for aftermarket emblems and tanks. Sold as a pack of 10...

V-Twin - 38-1279 - XL Gas Tank Mount KitDescriptionXL gas tank mount kit features a raw steel finish. Kit is used to weld on custom gas tanks for easier installation.*NOTE: Must order mount bolts separately. Fits:XL 1982-2003Additional Information UOM1...

V-Twin - 38-1276 - FXST Gas Tank RawDescriptionSoftail breakout FXST style gas tank features a raw finish. Fits:FLST 2012-2017FXST 2012-2017Additional Information OEM No.62322-11 UOM1 - EA ManufacturerV-Twin OriginImported StyleStock

V-Twin - 38-1275 - XL High Tunnel 2.5 Gallon Gas Tank RawDescriptionXL high tunnel 2.5 gallon gas tank features a raw finish. Gas tank is for carburetor models only and will accept petcock, not fuel pump.It uses a 3/8" National Pipe Thread style petcock,...

V-Twin - 38-1252 - Overhead Valve Steel Fuel Line KitDescription5 Piece Overhead Valve steel fuel line kit includes two piece line set, fuel shut off rod seat and 2 brass sealing washers. Lines and fitting are chrome. Fits:FL 1958-1965Additional...

V-Twin - 38-1251 - Gas Line KitDescription5 piece gas line kit includes 2 piece line set with shut off rod seal and 2 brass sealing washers. For swingarm frames. Fits:FL 1958-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported ...

V-Twin - 38-1250 - Gas Line KitDescription5 piece gas line kit features a zicad finish. Kit includes 2 piece line set with shut off rod seal including 2 brass seal washers. For rigid frames.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits:FL...

V-Twin - 38-1249 - Crossover Gas Line KitDescriptionCrossover gas line kit features a zicad finish. Kit includes 2 piece line set with shut off rod seal including 2 brass sealing washers.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits:FL...

V-Twin - 38-1247 - Lower Left Shift Pivot Mount RawDescriptionRaw lower left shift pivot mount supports shift pivot bushing on the outside of the tank, welded in place. Fits:FL 1941-1965EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - 38-1245 - Ratcheting Style Gas Cap Set Vented and Non-VentedDescriptionThis brass steel gas cap set is ratcheting style. The right cap is vented and the left side is non-vented. Caps are screw in type.Cap set features low pressure relief vent...

V-Twin - 38-1244 - Crossver Gas Line Zicad PlatedDescriptionCrossover type zicad plated gas line to fit tank to carburetor.Measures 6-3/4" center to center on fittings. ...

V-Twin - 38-1135 - Fuel Shut Off Rod KitDescriptionFuel shut off rod kit includes all components for use on Big Twins.Top cap, threaded collar and lower rod seat are zinc plated. Brass sealing washers, top rubber seal, spring and rod are included...

V-Twin - 38-1133 - Gas Tank Emblem KitDescriptionGas tank emblem kit includes chrome emblems, weld on mount strips and screws. Fits:FL 1951-1954Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages1205 Replacement...

V-Twin - 38-1129 - Replica Eaton Vented Gas Cap SetDescriptionReplica Eaton style chrome gas cap set is vented with a taller profile for an authentic look and features the EDM logo. Cap has a 3/16" band at the top. Restoration Quality by V-Twin MFG.Our...

V-Twin - 38-0999 - FXD Dash Mount Bracket Zinc PlatedDescriptionZinc plated dash mount bracket allows FXD dash panels to fit 1 piece bobbed tanks.FXD dash pnael is held in place by 2 5/16" x 8" allen screws and 2 1/4" x 20 speed nuts attached to the...

V-Twin - 38-0998 - XL Roadster Style 4.5 Gallon Gas Tank RawDescriptionXL Roadster gas tank features raw finish. Tank comes with a stock filler neck and left side fuel line fitting. Fuel capacity is 4.5 gallons for EFI models. Uses 3/8" NPT petcock.Check...

V-Twin - 38-0996 - Legacy 3.8 Gallon Gas TankDescriptionLegacy style 3.8 gallon gas tank with stock screw bung gives functional styling and improves driver comfort.Order gas cap separately. ...

V-Twin - 38-0995 - Hap Jones Lower Tunnel Screw Bung 1.8 Gallon Peanut Gas TankDescriptionThis lower tunnel screw bung peanut gas tank has a fuel capacity of 1.8 gallons and features a right side bung cap.*NOTE: UPS may consider this part as packaged...

V-Twin - 38-0992 - Black LED Smooth Style Fuel Gauge and Filler Cap SetDescriptionThese caps feature an LED left side dummy cap to replace the stock cap, and a right side screw filler cap that has a built in paint saver ring.The LED fuel gauge cap comes...

V-Twin - 38-0991 - Chrome LED Smooth Style Fuel Gauge and Filler Cap SetDescriptionThese caps feature an LED left side dummy cap to replace the stock cap, and a right side screw filler cap that has a built in paint saver ring.The LED fuel gauge cap comes...

V-Twin - 38-0990 - Black LED Cut Ribbed Style Fuel Gauge and Filler Cap SetDescriptionThese caps feature an LED left side dummy cap to replace the stock cap, and a right side screw filler cap that has a built in paint saver ring.The LED fuel gauge cap...

V-Twin - 38-0989 - Black LED Ribbed Style Fuel Gauge and Filler Cap SetDescriptionThese caps feature an LED left side dummy cap to replace the stock cap, and a right side screw filler cap that has a built in paint saver ring.The LED fuel gauge cap comes...

V-Twin - 38-0988 - Chrome LED Ribbed Style Fuel Gauge and Filler Cap SetDescriptionThese caps feature an LED left side dummy cap to replace the stock cap, and a right side screw filler cap that has a built in paint saver ring.The LED fuel gauge cap comes...

V-Twin - 38-0977 - Gas Tank Trim Bar Set Stainless SteelDescriptionStainless steel gas tank trim bar set.Includes weld on mount strips. Fits:FL 1951-1954Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages1205 ...

V-Twin - 38-0971 - Fuel Petcock Shut-Off Rod KitDescriptionShutoff petcock kit with viton tip includes steel spacers cadmium plated rod and seat fitting, brass knob, and cover.*NOTE: Replacement nylon tips available. Fits:G 1941-1949Additional...

V-Twin - 38-0970 - Gas Tank Emblem KitDescriptionKit includes oval emblem set with polished chrome outer edge and matte finish insert, and mount strip with adhesive which can be welded on after placement. Can be afixed to all Fat Bob tanks. Fits:W...

V-Twin - 38-0967 - Gas and Oil Cap Set ChromeDescriptionEaton replica gas and oil cap set features a chrome finish. The oil cap is shorter than the gas cap.Oil cap measures 1/2" tall and the gas cap measures 3/4" tall. Right side is 3/8" NPT female, left...

V-Twin - 38-0966 - Bobbed 5.1 Gallon Gas TankDescriptionGas tank has left side fuel line fitting, and has a fuel capacity of 5.1 gallons. Tank is for EFI models and includes dash mount and bunny bung.EFI type tank does not have provisions for installing...

V-Twin - 38-0951 - Replica Gas Tank 2.4 GallonDescriptionReplica rolled bottom gas tank has a fuel capacity of 2.4 gallons.Tank is for EFI models. Existing fuel pump gasket can be reused. Check the tank for flaws and fit before painting. The tank...

V-Twin - 38-0948 - Lower Tunnel Screw Bung 1.8 Gallon Peanut Gas TankDescriptionThis lower tunnel screw bung peanut gas tank has a fuel capacity of 1.8 gallons and features a center fill cap.*Note: UPS may consider this part as packaged "oversize" for...

V-Twin - 38-0946 - Teardrop Gas Tank Emblem KitDescriptionTeardrop tank emblem kit includes mount strips with adhesive.Mount with adhesive to place in desired position, then braze in place for permanent placement. Fits:XL 1957-UPFX 1971-UPG 1936-1973EL...

V-Twin - 38-0944 - World's Fair Tank Emblem SetDescriptionWorld's Fair tank emblem kit includes weld on mounts, flat type to fit flat gas tanks.Includes weld on mount strips. Suggestion: Place mounts with adhesive, and weld when they are in correct...

V-Twin - 38-0943 - Gas Tank Emblem SetDescriptionGas tank emblem set will attach to stock or aftermarket weld on mounts. Emblems are polished chrome on outer edge, matte finish inside and will fit all bobbed tanks, all years.Original Cominsky of Chicago...

V-Twin - 38-0937 - World's Fair Tank Emblem SetDescriptionWorld's Fair tank emblem skit includes adhesive weld on mounts for the curved side style gas tanks.Suggestion: Place mounts with adhesive, and weld when they are in correct position. Fits:All...

V-Twin - 38-0933 - Gas Tank Bracket Cover Set ChromeDescriptionChrome front gas tank bracket cover set includes right and left side. Fits:XL 2004-UPAdditional Information OEM No.70904-04 (L) UOM1 - SET MeasurementsAdditional InformationLength:...

V-Twin - 38-0929 - JD Gas Cap and Bung SetDescriptionJD gas cap and bung set includes a weld-in screw-in bung with a nickel plated matching gas cap.Universal fit for restoration or custom use. *NOTE: The gas cap bung features a 44mm outer diameter...

V-Twin - 38-0925 - Wyatt Gatling Stretch Touring 6.6 Gallon Gas TankDescriptionRaw 6.6 gallon stretch Touring gas tank includes raw dash cover panel and is for EFI models.Will fit a 2003-07 FLT model with modifications and welding. Before installation or...

V-Twin - 38-0924 - Gas Tank Emblem SetDescriptionGas tank emblem set attaches with stock or aftermarket weld on mounts. Emblems are parkerized and will fit all bobbed tanks, all years.Original Cominsky of Chicago design from the 1940s, exact as...

V-Twin - 38-0923 - Chrome inchDeluxe inch Fender Emblem SetDescriptionDeluxe emblem is chrome, die cast. Features two 1/4" prongs which will accept speed nuts.Set of two. Order mount screws separately. Fits:All modelsAdditional Information UOM1 - SET ...

V-Twin - 38-0919 - Bobbed 3.5 Gallon Gas Tank Set RawDescriptionBobbed gas tank set features a raw finish and has a fuel capacity of 3.5 gallons. Set features emblem mounts welded into place. Emblems not included. Gas tanks accept 3/8 NPT petcock on the...