V-Twin - 10-0759 - Connecting Rod Wrist Pin Bushing SetDescription.010 bushings for piston pin.Set of two. *NOTE* Inside diameter must be reamed to proper size after installation. Fits:FXST 1984-1998FXR 1982-1994FLT 1979-1998FX 1971-1984EL 1936-1940FL...

V-Twin - 10-0758 - Connecting Rod Wrist Pin Bushing SetDescription.005 oversize bushings for piston pin.Set of two. *NOTE* Inside diameter must be reamed to proper size after installation. Fits:FXST 1984-1998FXR 1982-1994FLT 1979-1998FX 1971-1984EL...

V-Twin - 10-0757 - Connecting Rod Wrist Pin Bushing SetDescription.002 bushings for Piston pin.Set of two. *NOTE* Inside diameter must be reamed to proper size after installation. Fits:FXST 1984-1998FXR 1982-1994FLT 1979-1998FX 1971-1984EL...

V-Twin - 10-0756 - Connecting Rod Wrist Pin Bushing SetDescriptionStandard bushings for piston pin.Set of two. ...

V-Twin - 10-0741 - Brake Crossover Lever Shaft Bushing SetDescriptionBushings are for mechanical brake crossover lever shafts.Sold as a pair. Fits:EL 1936-1940FL 1941-1957UL 1938-1948Additional Information OEM No.47755-31 UOM1 - SET ...

V-Twin - 10-0740 - Rear Brake Backing Plate Cam BushingDescriptionBushing for mehanical brake rear backing plate cam. Bushing is standard size. Fits:UL 1937-1948EL 1936-1940FL 1941-1957Additional Information OEM No.41685-37 UOM1 - EA LocationRear ...

V-Twin - 10-0731 - Cam Cover BushingDescriptionBushing for cam cover bushing for side valve models. Fits:WL 1937-1952G 1937-1957Additional Information OEM No.25588-37 UOM1 - EA ManufacturerEastern OriginUSA 2025 Catalog Pages798

V-Twin - 10-0717 - Distributor Housing BushingDescriptionBushing for single point distributor manual advance models.. Fits:FL 1941-1969WL 1937-1951GE 1937-1973UL 1937-1942EL 1936-1952Additional Information OEM No.32525-36A UOM1 - EA ...

V-Twin - 10-0699 - 4-Finned Panhead Cam Cover CastDescriptionPanhead cam cover with a 4-finned design includes bushings installed and is forged aluminum with cast finish.Cam cover bushings must be checked and fitted (reamed) for final assembly Check end...

V-Twin - 10-0698 - OE Engine Case Right Bearing Assembly BlueDescriptionOE blue engine case right bearing assembly. Fits:FLST 1987-1998FXR 1987-1994FXST 1987-1998FXD 1991-1998FLT 1987-1998Additional Information OEM No.24643-87A UOM1 - EA ...

V-Twin - 10-0693 - 45 inch Left Side Case Race StandardDescription45" left side standard case race is machined and ground to factory specifications. Fits:WL 1939-1952G 1939-1973Additional Information UOM1 - EA ManufacturerEastern OriginImported

V-Twin - 10-0686 - 1-Hole Crank PinDescriptionNew Old Stock" 1-hole crank pin is original Army Surplus used on 45" models.You must align oil feed in flywheels with crank pin. OEM uses 2 different flywheels so hole location may differ. This crank pin...

V-Twin - 10-0685 - 1-Hole Crank Pin with NutsDescriptionNew Old Stock" 1-hole crank pin with nuts is original Army Surplus used on 45" models.Has a wax and cosmoline oil coating which will needs to be carefully removed with a razor blade. You must align...

V-Twin - 10-0684 - 4-Finned Panhead Cam Cover PolishedDescriptionFL polished Panhead cam cover with a 4 rib design includes bushings installed.Accepts 1/4" generator screws. Include 1954-62 type pinion bushing OEM#25585-54. Cam cover bushings must be...

V-Twin - 10-0679 - Zinc Rear Tappet Block SetDescriptionZinc rear honed tappet block set. Fits:W 1929-1952WL 1937-1952V 1930-1936G 1937-1973U 1937-1938Additional Information UOM1 - SET ManufacturerMotorshop OriginImported 2025 Catalog Pages802

V-Twin - 10-0677 - Zinc Front Tappet BlockDescriptionZinc front honed tappet block. Fits:W 1929-1952WL 1937-1952V 1930-1936G 1937-1973U 1937-1938Additional Information UOM1 - EA ManufacturerMotorshop OriginImported 2025 Catalog Pages802

V-Twin - 10-0675 - UL Tappet Assembly and Base KitDescriptionZinc plated non-threaded tappet assembly and base kit includes 4 tappet assemblies with adjuster screws and mount screw kit.Accepts 80" valve spring cover set, not screw on type. *NOTE: Must...

V-Twin - 10-0592 - Cam Cover PolishedDescriptionPolished surface cam cover include bushings for cams for kick starter models.All cam bushings are installed but may need reaming before final installation. Breather sleeve is installed. *NOTE: Hole is...

V-Twin - 10-0591 - Cam Cover PolishedDescriptionPolished surface cam cover include bushings for cam for kick starter models.All cam bushings are installed but may need reaming before final installation. Breather sleeve is installed. *NOTE: Hole is...

V-Twin - 10-0576 - S&S Engine Crankcase SetDescriptionCrankcase set for 2000-2006 TC-88A engine with stock bore engine with stock bore and comes ready to assemble.S&S crankcase set includes Timken left side bearing, race assembly, seal, seal spacer, oil...

V-Twin - 10-0567 - Standard Sifton Lightning Tappet SetDescriptionSolid Sifton tappet assembly includes installed roller assembly.Tappet has holes for better lubrication. Adjuster screws are not included.*NOTE: Big Axle pin may require peening to provide...

V-Twin - 10-0563 - Replica Cam Cover ChromeDescriptionReplica cover includes bushings installed. Fits:XL 2004-UPAdditional Information OEM No.25213-04 UOM1 - EA FinishChrome ManufacturerMotorshop OriginImported 2025 Catalog Pages845

V-Twin - 10-0560 - Cam Cover PolishedDescriptionPolished cam cover features cutout for a starter motor and comes with bushings.Breather valve not included. This cover should be used with correct year points cover only and does not have a distributer...

V-Twin - 10-0559 - Cam Cover PolishedDescriptionPolished aluminum cam cover include bushings for cams and have a cutout for the starter motor.Lower mount hole is slotted for 1977-up models. Cover is for electric start models. The top threaded hole...

V-Twin - 10-0558 - Cam Cover PolishedDescriptionPolished surface cam cover include bushings for cams and have a cutout for the starter motor.Lower mount hole is slotted. Cover is for electric start models. All cam bushings are installed but may need...

V-Twin - 10-0554 - Replica Cam Cover ChromeDescriptionReplica cam cover includes installed bushings.Must order gasket separately. *NOTE: Lower edge has welding marks and pits where cross fit for the oil passage is closed, for oil circulation. These are...

V-Twin - 10-0552 - Magnum 3-Hole Crank PinDescriptionMade of 8620 steel with .62 heat treated penetration and is a 3-hole type. Fits:XL 1957-1980Additional Information OEM No.23960-54 UOM1 - EA ManufacturerMotorshop OriginImported 2025 Catalog...

V-Twin - 10-0550 - 3-Hole Crank PinDescriptionMade of 8620 steel with .120 heat treatment and is 3-hole type. Fits:XL 1957-1980Additional Information OEM No.23960-54 UOM1 - EA ManufacturerEastern OriginUSA 2025 Catalog Pages841

V-Twin - 10-0543 - Tappet Screw KitDescriptionAdjuster screw kit includes 4 screws and 4 matching lock nuts. Fits:G 1949-1973WL 1940-1952Additional Information UOM1 - KIT ManufacturerMotorshop OriginUSA 2025 Catalog Pages802 Replacement Items10-0519...

V-Twin - 10-0519 - Tappet Adjuster ScrewDescriptionSet of 4 tappet adjuster screws.Set of four. Fits:U 1940-1948G 1949-1973WL 1940-1952Additional Information OEM No.18556-40 UOM1 - SET ManufacturerEastern OriginUSA 2025 Catalog Pages802

V-Twin - 10-0507 - Lightning Tappet Assembly .005DescriptionSifton assembly includes installed roller assembly and adjuster screws or nut for application.Tappet has holes for better lubrication. Tappets have an outer diameter of .735. Fits:WL 1937-1952UL...

V-Twin - 10-0506 - Standard Lightning Tappet AssemblyDescriptionSifton assembly includes installed roller assembly and adjuster screws or nut for application.Tappet has holes for better lubrication and an outer diameter of .735. Fits:WL 1937-1952UL...

V-Twin - 10-0489 - Black Cam and Sprocket Cover SetDescriptionCam and sprocket cover set features a black finish. Fits:XL 2004-UPAdditional Information UOM1 - SET ManufacturerMotorshop OriginImported 2025 Catalog Pages845

V-Twin - 10-0479 - Engine Sprocket ShaftDescriptionV-Twin engine sprocket shaft for 45 side valve models. Fits:WL 1937-1952DL 1929-1931WL 1932-1936G 1932-1973Additional Information OEM No.24000-29 UOM1 - EA ManufacturerMotorshop OriginImported 2025...

V-Twin - 10-0478 - Chrome Cam and Sprocket Cover SetDescriptionCam and sprocket cover set features a chrome finish. Fits:XL 2004-UPAdditional Information UOM1 - SET ManufacturerMotorshop OriginImported 2025 Catalog Pages845

V-Twin - 10-0477 - Panhead Extreme Duty Engine Case SetDescriptionV-Twin extreme duty case set is the authentic look for builders and restoration. Accepts Panhead lifter blocks and cylinders. Includes circuit breaker stud, idler shaft kit, cam bearings...

V-Twin - 10-0449 - 45 inch WL Engine Pinion ShaftDescriptionPrecision ground for correct fitment. Fits:WL 1937-1952G 1937-1973Additional Information OEM No.24005-37 UOM1 - EA ManufacturerEastern OriginUSA 2025 Catalog Pages799

V-Twin - 10-0437 - Engine Sprocket ShaftDescriptionMachined and hardened to factory specifications. Fits:WL 1937-1952DL 1929-1931WL 1932-1936G 1932-1973Additional Information OEM No.24000-29 UOM1 - EA ManufacturerEastern OriginUSA 2025 Catalog...

V-Twin - 10-0433 - 45 inch WL Replica Pinion ShaftDescriptionReplica pinion shaft is machined and ground to factory specifications. Fits:WL 1937-1952G 1937-1973Additional Information OEM No.24005-37 UOM1 - EA ManufacturerMotorshop OriginImported ...

V-Twin - 10-0430 - Left Case Oil SlingerDescriptionBig Twin Internal left bearing end spacer. Fits:WL 1939-1952G 1939-1973Additional Information OEM No.24775-39 UOM1 - EA ManufacturerEastern OriginUSA 2025 Catalog Pages797