V-Twin - 51-0458 - 45 Front Control Rod Forging RawDescription45 front control rod forging features a raw finish.Braze on to front down tube to support brake and clutch strap, and jiffy stand on the left side. Fits:W 1936-1952Additional Information UOM1...

V-Twin - 51-0456 - Rear Frame Axle Plate SetDescriptionRear frame right and left axle plates with oiled raw steel finish for 45 solo frames, constructed of forged steel.Must be welded in place. ...

V-Twin - 51-0438 - Softail Top Frame PlateDescriptionSoftail top frame plate features a raw steel finish, to match with seat area plate on 1986-1999 Softail original frames.For Hardtail installation. *NOTE: Align with the (2) 1/4" holes in plates. ...

V-Twin - 51-0436 - 45 WL Rear Fender Mount BraceDescription45 WL rear fender mount brace is original style featuring raw steel forging that attaches to frame rails.*NOTE: Frame parts are forged and machined using tooling exclusively by V-Twin MFG. Fits:W...

V-Twin - 51-0432 - Black Skid PlateDescriptionBlack powder coated skid plate is made of steel. Fits:XL 2004-UPAdditional Information UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 51-0431 - 45 inch Frame Seat Post ForgingDescriptionThis top frame part is machined to accept rear tube, center seat post tube and upper and lower gas tank tubes.Brace has threaded holes for the rear fender and battery box. ...

V-Twin - 51-0429 - FXR Top Motor Mount RawDescriptionFXR weld on top motor mount features a raw finish and is . for use on frame.Must be welded in place on FXRT and FLT models. Fits:FXR 1982-1990FLT 1980-1990Additional Information UOM1 - EA ...

V-Twin - 51-0428 - 45 inch WL Tool Box Tab Raw SteelDescription45 WL tool box tab must be welded or brazed on the left side and features a raw steel construction. Fits:WL 1941-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported ...

V-Twin - 51-0085 - 45 inch WL Frame, Tank and Fender KitDescriptionKit includes a 5 gallon WR gas tank set with both sides being for gas, a remote oil tank, a Tourist Trophy rear fneder and a 45" sample stock frame which may need hand fitting in some...

V-Twin - 51-0081 - Evolution Rigid Project EnsembleDescriptionEvolution rigid project ensemble includes 113 S+S motor and kick starter transmission with electrical starter.Requires the use of a 1991-1999 Softail belt drive or drive train. Fits:FLST...

V-Twin - 51-0079 - Rear Motor Mount Plate Raw SteelDescriptionRear motor mount plate features a raw steel finish and is for use on custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested...

V-Twin - 51-0077 - 45 inch Frame and Tank KitDescription45" frame and tank kit. Fits:WL 1937-1946Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages815

V-Twin - 51-0057 - Rear Motor Mount Frame Plate RawDescriptionRear motor mount frame plate features a raw steel finish and is for use on hardtails and custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported ...

V-Twin - 51-0046 - Rear Motor Mount CastingDescriptionRear motor mount casting features an investment cast construction and is for rigid frames. Fits:XL 1982-2003Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to...

V-Twin - 51-0029 - Rear Passenger Footpeg SetDescriptionBlack rear passenger footpeg set with frame bar for right and left sides. Fits:FLST 2018-UPFXST 2018-UPAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 51-0023 - Rear Passenger Footpeg Set BlackDescriptionRear passenger footpeg set features a black finish. Footpegs act as a rear bar and frame guard. The end has nylon tips and frame sliders. Fits:FLST 2018-UPFXST 2018-UPAdditional Information ...

V-Twin - 50-9265 - Custom Rear Fender 11 inchDescriptionCustom rear fender measures 11" wide and is equipped with internal struts for FXST models. Fits:Custom applicationAdditional Information UOM1 - EA ManufacturerWyatt Gatling OriginImported ...

V-Twin - 50-9183 - Custom Rear Cropped Fender 11 inchDescriptionSmooth Sabre rear custom fender is a one piece cropped formed construction steel fender. Fender is 11" wide and is undrilled. Fits:Custom applicationAdditional Information UOM1 - EA ...

V-Twin - 50-1773 - Chrome Sissy Bar with Black PadDescriptionSissy bar features a chrome finish and comes with a black pad. Fits:XL 2004-2022Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 50-1772 - Chrome Sissy Bar with Black PadDescriptionSissy bar features a chrome finish and comes with a black pad.Requires the separate purchase of the docking hardware kit and may require the directional relocation kit. Fits:FLSTFB 2000-UPFLSTN...

V-Twin - 50-1654 - Black Right Side Tool Box and Mount KitDescriptionBlack right side tool box kit contains a black ribbed box with two keys, mount bracket, footpeg spacer, and hardware.Order tools separately. Fits:FXST 1984-1999FLST 1986-1999Additional...

V-Twin - 50-1595 - 5 inch JD 180  Ribbed Rear Fender RawDescription5" JD rear fender is blank raw steel without brackets or holes, and can be used for restoration or customization.Exact width as JD 1920's Harley's. *NOTE: One piece full 180  fender is...

V-Twin - 50-1544 - Oval Right Side Chrome Tool BoxDescriptionReplica chrome right side oval tool box includes keys and features round style barrel key set!Features round style barrel key set! Order mount hardware separately. Fits:FL 1941-1957EL...

V-Twin - 50-1543 - Black 45 Tool Box KitDescriptionTool box kit is for 45 models with two keys included. Kit also features a black tool box, zinc plated bracket and mount kit. Bracket is bolt on installation. Fits:W 1941-1952Additional Information UOM1...

V-Twin - 50-1538 - 45 Tool Box KitDescriptionTool Box kit is for 45 models with two keys included. Kit also features chrome tool box, zinc plated bracket, and mount kit. Bracket is bolt on installation. Fits:W 1941-1952Additional Information UOM1 - KIT ...

V-Twin - 50-1535 - Rectangular Black Tool BoxDescriptionBlack rectangular tool box has a drop hinge.Tool box lid is held open by built in hinge with stop, as original! Restoration Quality! This is about $800 less than an original one! Note: For ...

V-Twin - 50-1234 - Rectangular Parkerized Tool BoxDescriptionParkerized rectangular tool box includes keys.Order mount hardware separately. Fits:EL 1936-1939UL 1938-1939Additional Information UOM1 - EA ManufacturerWyatt Gatling OriginImported 2025...

V-Twin - 50-1186 - Black Rigid Tool Box KitDescriptionRigid tool box kit includes black tool box, bracket, and mount kit for rigid hardtail frames. The kit is used for lower right side frame mounting. Includes Tedd Cycle Patch.Imported tool boc with...

V-Twin - 50-1159 - 45 Bobbed WR Rear Fender RawDescription45 WR bobber style rear fender is raw with braces.Raw fender includes mount straps and narrow braces that feature mount tabs for the chain guard attached. The brace measures 3/4" and 1/8" in...

V-Twin - 50-1139 - Rectangle Raw Tool BoxDescriptionRectangle tool box has a raw finish and includes keys.Order mount hardware separately. Item is shipped in raw finish. Item is shipped raw oil steel. You can make em' rusty! Like barn fresh... or apply...

V-Twin - 50-1012 - Chrome Left Side Oval Tool Box and Mount KitDescriptionChrome oval tool box and mount kit is for the left side. Box is chrome ribbed, and includes an early style forked key set, mount bracket, footpeg spacer, and hardware.Mounts to the...

V-Twin - 50-0983 - Rectangular Black Tool BoxDescriptionBlack rectangular tool box is for the right side and includes keys.Does not include tools. Order hardware separately. Fits:EL 1936-1939UL 1938-1939Additional Information UOM1 - EA ...

V-Twin - 50-0934 - Tool Box KitDescriptionTool box kit includes chrome oval tool box with 2 keys, zinc plated mount bracket and liner.Bracket will mount tool box on left side in rear of outer primary cover. Fits:FX 1977-1984FL 1977-1984Additional...

V-Twin - 50-0926 - Chrome Rigid Tool Box KitDescriptionRigid tool box includes chrome tool box, bracket, and mount kit for rigid hardtail frames. The kit is to mount on the right side lower rear frame tube. Includes Tedd Cycle patch.Bracket must be...

V-Twin - 50-0778 - Spring Fork Front FenderDescriptionSpring fork front fenders are 7-1/4" wide for 16" or 18" wheels. The fender body is one piece construction with riveted on 7/8" wide braces.For use on models with 3/8" axle and rockers inside the...

V-Twin - 50-0772 - Military Front FenderDescriptionSkirtless front fender is a 1940 army style for 45 solo models with spring forks. Fender comes with braces that are 5/8" wide. Fender features a raw finish.Hole closest to the front of fender measures...

V-Twin - 50-0771 - Military Rear FenderDescriptionRear fender is skirtless Army style of the 1940's for 45 Solo models.Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be...

V-Twin - 50-0749 - Spring Fork Front FenderDescriptionReplica Spring Fork front fender features one piece spot welded skirt panels and correct width braces. Fender has one hole on each side for the mounting point at the fork rocker area.Fender is for use...

V-Twin - 50-0673 - Black Left Side Oval Tool BoxDescriptionBlack left side oval tool box includes keys.Tools are not included. Fits:Custom applicationAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1222

V-Twin - 50-0643 - VL Spring Fork Front FenderDescriptionSpring fork front fender features a raw finish and is the exact body shape of the 1934-1936 VL.This Spring Fork fender mounts to the 2 front tabs on the front Spring Fork leg and features wide...