V-Twin - 32-1333 - Distributor Top Zicad PlatedDescriptionDistributor top for single point distributor manual advance models features a zicad plated finish.Order all hardware separately. *NOTE: Requires 3 pieces...

V-Twin - 32-1329 - XR Magneto Rotor with Tapered ShaftDescriptionXR magneto armature has a tapered shaft to accept the magneto gear. Fits:XR 1957-1980Additional Information UOM1 - EA MeasurementsAdditional InformationWidth: 8.6mmLength: 12.5mmHeight:...

V-Twin - 32-1328 - Retro 6 Volt Distributor Top AssemblyDescriptionRetro 6 volt distributor top assembly is for use on Panhead models and features a zinc plated construction.This upgraded top utilizes late Shovelhead point sets. *NOTE: The condenser is...

V-Twin - 32-1325 - M8 V-Twin Performance Spark PlugsDescriptionV-Twin perfomance spark plugs for M8 models features a copper core electrode for a longer service life, nickel plated housing, 95% pure alumina insulator and a heat crimping process to ensure...

V-Twin - 32-1324 - White Zinc Relay Mount BracketDescriptionRelay mount bracket with white zinc finish for the right side of the engine. Fits:EL 1936-1939Additional Information OEM No.4786-36 UOM1 - EA ManufacturerVolt Tech OriginImported 2025...

V-Twin - 32-1319 - Relay Positive WireDescriptionRelay positive wire.The red wie has 2 flat ends. Fits:UL 1939-1946FL 1941-1946WL 1939-1946EL 1939-1946Additional Information OEM No.4706-39 UOM1 - EA ManufacturerV-Twin OriginUSA TypeAll Other 2025...

V-Twin - 32-1317 - Magneto Drive Gear SetDescriptionMagneto drive gear set is undersized for better fitment with the nose cone magneto asssembly. Fits:FL 1970-1992Additional Information UOM1 - SET ManufacturerVolt Tech OriginImported 2025 Catalog...

V-Twin - 32-1316 - Ignition Condenser and BracketDescriptionIgnition condensers are made from the finest materials and are designed for high quality and reliability. Bracket is included. Fits:FL 1948-1978Additional Information UOM5 - PK ...

V-Twin - 32-1314 - Magneto Insulator Block KitDescriptionMagneto insulator block for key switch applicatoins, is constructed as original of black brakelite.Includes plastic block, wire and 3 screw. Fits:XLCH 1962-1970 key switch applicationsAdditional...

V-Twin - 32-1312 - Distributor Base KitDescriptionDistributor base kit is fully assembled and ready to install . The kit is for use with single point base and shaft. The base is zinc plated.*NOTE: Requires 3 pieces of OEM #2626 Round Head Screws 8-32" x...

V-Twin - 32-1311 - Right Hand Burkhardt Magneto Head AssemblyDescriptionBurkhardt magneto assembly with right hand rotation features internal female hex drive on rotors to fit all Joe Hunt, Morris and Fairbanks Morse drive units. This complete head is...

V-Twin - 32-1310 - Black Replica 3-Brush Delco Remy RelayDescriptionReplica Delco Remy 3-brush 6 volt relay features original contact points construction with embossed black cover.Exclusive new tooling by V-Twin Mfg. Includes Delco-Remy embossed cover...

V-Twin - 32-1309 - Complete Burkhardt Magneto Head with Key LockDescriptionMagneto assembly with right hand rotation features internal female hex drive on rotors to fit all Joe Hunt, Morris and Fairbanks Morse drive units. This complete head is with the...

V-Twin - 32-1306 - Black 12 Volt XL Alternator KitDescriptionIncludes black alternator, black regulator, gear and zinc screw set. Fits:XL 1971-1984Additional Information UOM1 - KIT ManufacturerVolt Tech OriginImported 2025 Catalog Pages959 ...

V-Twin - 32-1302 - Joe Hunt Magneto KitDescriptionMagneto kit includes angle drive, base unit, advance, and Joe Hunt magneto.This Magneto is driven from the cam like the original ignition system. Includes rare earth magnets that never need to be...

V-Twin - 32-1301 - Right Hand Magneto Assembly HeadDescriptionThis manual advance magneto is prepared and set up to increase performance and reliability, for right hand clockwise rotation.Check cylinder and head for clearance before installation as the...

V-Twin - 32-1298 - Complete Magneto Head AssemblyDescriptionJoe Hunt magneto body without shaft features rare earth magnets that never need recharging. Assembly features hex drive base to fit all Joe Hunt, Burkhardt, and V-Twin drive units for 45 ...

V-Twin - 32-1297 - Joe Hunt Magneto AssemblyDescriptionThis magneto is prepared and set up to increase performance and reliability. Direct bolt in for Harley flatheads only.Includes shaft. Order mount plate separately. Fits:UL 1936-1948WL...

V-Twin - 32-1296 - Joe Hunt H-4 Automatic Advance MagnetoDescriptionAutomatic advance vertical magneto features H-4 automatic advance for easier starting and hotter spark, natural aluminum cam cover, and rare earth magnets that never need to be recharged...

V-Twin - 32-1295 - Distributor Wire StudDescriptionDistributor wire stud is for single point distributor manual advance models. Fits:W 1940-1947EL 1940-1947Additional Information OEM No.32676-42 UOM1 - EA ManufacturerVolt Tech OriginUSA

V-Twin - 32-1294 - Magneto ShaftDescriptionMagneto shaft features snap ring groove and hex drive. Fits:G 1936-1973U 1937-1948W 1936-1952Additional Information UOM1 - EA MeasurementsAdditional InformationHex Diameter: 3/8" ManufacturerVolt Tech ...

V-Twin - 32-1293 - Magneto Drive and Base KitDescriptionKit will accept hex drive Magneto. Includes cast base, gear, pin, shaft, mount plate, tachometer drive plug, shouldered mount bolts, seal and gasket.NOTE: This is the real deal Sportster advance...

V-Twin - 32-1291 - 6 Volt Distributor Top AssemblyDescription6 volt distributor top assembly includes all realated components.Kit includes the top, retainer, points, condenser wire, washers, bushings, studs and hardware. *NOTE: Requires 3 pieces of OEM...

V-Twin - 32-1290 - Magneto AssemblyDescriptionBurkhardt magneto drive sub assembly is a partial magneto head replacement with female hex drive. For all Joe Hunt, Morris, Fairbanks-Morse and Jack Cotton hex magneto applications.Assembly includes body with...

V-Twin - 32-1287 - Ignition Points and Condenser KitDescriptionIgnition points and condenser kit includes a Delco Remy ignition condenser, points set, spring plate and points spring.Note that the point arm swings short due to the fixed plate, which...

V-Twin - 32-1286 - Distributor Retaining Ring and Clip KitDescriptionDistributor retaining ring and clip kit is cadmium plated as original. Fits:FL 1941-1964EL 1936-1952Additional Information UOM1 - KIT ManufacturerVolt Tech OriginUSA 2025 Catalog...

V-Twin - 32-1284 - Battery Terminal KitDescriptionThis battery terminal kit is for models with 6 volt H-2 battery. Fits:FL 1941-1964EL 1936-1952Additional Information UOM1 - KIT ManufacturerVolt Tech OriginImported SizeSTD Type6 volt 2025 Catalog...

V-Twin - 32-1282 - 32E/65A 12 Volt Alternator Conversion Kit ChromeDescriptionGenerator to alternator 12 volt 32E/65A conversion kit includes a black body and chrome end cover alternator with a solid state regulator.Kit requires a 12 volt battery system...

V-Twin - 32-1281 - Alternator Charging System Kit 50 AmpDescription3-phase kit includes stator, regulator, rotor, and hardware. Fits:FLT 1999-2003FLHT 1999-2003Additional Information UOM1 - KIT ManufacturerVolt Tech OriginImported Type50 amp 2025...

V-Twin - 32-1280 - Alternator Charging System Kit 50 AmpDescription3-phase kit includes stator, regulator, rotor, and hardware.Kit offers an increase in charging power when upgrading from a 32 or 38 amp system. This kit produce 32 amps at 1000 RPMs and...

V-Twin - 32-1279 - Alternator Charging System Kit 50 AmpDescription3-phase kit includes stator, regulator, rotor, and hardware.Kit offers an increase in charging power when upgrading from a 32 or 38 amp system. This kit produces 32 amps at 1000 RPMs and...

V-Twin - 32-1278 - Alternator Charging System Kit 50 AmpDescription3-phase kit includes stator, regulator, rotor, and hardware.Kit offers an increase in charging power when upgrading from a 32 or 38 amp system. This kit produces 32 amps at 1000 RPMs and...

V-Twin - 32-1275 - Joe Hunt Magneto DriveDescriptionJoe Hunt magneto drive. Fits:FXST 1993-1999FLST 1993-1999Additional Information UOM1 - EA ManufacturerJoe Hunt OriginUSA 2025 Catalog Pages1304

V-Twin - 32-1257 - 1936 Distributor CapDescription1936 distributor cap includes a chrome clip.*NOTE: Extra bump in the center! Fits:EL 1936-1936Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025 Catalog Pages669

V-Twin - 32-1255 - Angle Magneto Drive AssemblyDescriptionAngle Magneto drive kit includes angle drive, base unit, and advance for holes in the point housing which are vertical.Magneto unit is not included. Fits Sportster models. Fits:XL...

V-Twin - 32-1250 - Joe Hunt H-4 Automatic Advance MagnetoDescriptionAutomatic advance vertical magneto features H-4 automatic advance for easier starting and hotter spark, polished aluminum cam cover, and rare earth magnets that never need to be...

V-Twin - 32-1247 - Rotor and Magneto Shaft AssemblyDescriptionShaft is machined for tachometer drive. Fits:XL 1957-1970Additional Information OEM No.29623-55A UOM1 - EA ManufacturerVolt Tech OriginImported 2025 Catalog Pages1303

V-Twin - 32-1246 - Panhead Spark Plug Set and Book KitDescriptionReplaces 3-4 Harley plugs with 2 V-Twin Manufacturing plugs for 1948-1965 Panhead Harleys and includes a Panhead parts book. Fits:FL 1948-1974FX 1971-1974Additional Information UOM1 - KIT ...

V-Twin - 32-1245 - Alternator Gear SpacerDescriptionZinc plated alternator gear spacer is for use when installing a 12 volt alternator or generator on a side valve Flathead 74", 80" or 45 model. Fits:W 1964-1973Additional Information OEM No.5946W UOM5...

V-Twin - 32-1244 - Ignition 12 Volt CondenserDescriptionIgnition condenser is 32.5mm long and is for 12 volt systems.The diameter without the holder is 0.6705". Fits:XLCH 1957-1978FX 1971-1978XLH 1957-1970FL 1948-1978FLH 1948-1978Additional Information ...