V-Twin - 35-2001 - Linkert Carburetor Float BowlDescriptionLinkert carburetor float bowl fits 1936-up Big Twin overhead valve models. Fits:FL 1936-UPEL 1936-UPE 1936-UPAdditional Information OEM No.27370-36 UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-2000 - Linkert Carburetor Float BowlDescriptionLinkert carburetor float bowl fits all Side Valve linkert carburetors. Includes drain hole and copper drain plug. Fits:All sidevalve linkert carburetorsAdditional Information OEM No.27370-24 ...

V-Twin - 35-1972 - CV Carburetor Thunder Jet Kit BlackDescriptionCV Carburetor Thunder jet kit for 1988-2006 CV carburetors. Kit features a black finish. Fits:FX 1993-2006XL 1988-2006Additional Information UOM1 - KIT ManufacturerZippers OriginUSA ...

V-Twin - 35-1969 - Jack Hammer 1/4 inch Turn Twist Grip KitDescriptionTwist grip kit includes V-Twin original Jack Hammer grips, 1/4 turn 1" handlebar throttle assembly and universal cable. Fits:Custom applicationAdditional Information UOM1 - KIT ...

V-Twin - 35-1952 - Intake Manifold Nut SetDescriptionNut set for 1.700" diameter intake manifold. Fits:K 1952-1956WR 1936-1952Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages806

V-Twin - 35-1949 - MR-3 Linkert Carburetor AssemblyDescriptionReplica of the venerable MR-3 carburetor fitted to WR models includes all components fully assembled. This 4 bolt flange type fits the 4 bolt WR manifold and does not accept a choke mechanism...

V-Twin - 35-1942 - M74 Linkert Carburetor AssemblyDescriptionM74 Linkert carburetor assembly with a black finish is for Knuckleheads and includes the correct throttle arm installed. Fits:FL 1941-1947Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1941 - M41 45 Linkert KitDescriptionM41 1-5/16" 45" Linkert carburetor kit.Includes venturi, bowl, throttle arm, throttle shaft, choke shaft, needle, throttle door, float bowl and gaskets. Fits:WL 1941-1945Additional Information UOM1 - KIT ...

V-Twin - 35-1940 - 45 WL Brass Linkert Carburetor AssemblyDescription45 WL brass linkert carburetor assembly with 1-1/4" M88 configuration. Includes brass float bowl, brass strainer and nytrophyl float fully assembled. Every part is brand new and accepts...

V-Twin - 35-1900 - M74 Linkert Carburetor AssemblyDescriptionM74 Linkert carburetor assembly with a brass bowl and a black body for Knuckleheads and includes the correct throttle arm installed. Fits:FL 1941-1965EL 1936-1952Additional Information UOM1 -...

V-Twin - 35-1899 - Replica M74 Linkert Carburetor BlackDescriptionReplica linkert M-74 carburetor is fully assembled with a black painted brass body. All parts included as shown.1-1/2" carburetor assembly includes the top throttle arm assembly installed...

V-Twin - 35-1898 - OKO 45mm Flat Side Carburetor KitDescriptionOKO 45mm flat side carburetor kit includes the carburetor, manifold, flange kit and chrome bracket.Twist grip and cables available separately. Fits:FLT 1999-2016FXD 1991-2017FLST...

V-Twin - 35-1888 - Linkert Cable EndDescriptionLinkert cable end with the larger cable hole. Fits:Custom applicationAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with #36-0395 Snap Throttle Cable.

V-Twin - 35-1887 - Float Bowl KitDescriptionFloat bowl kit fits Super "E" shorty and OKO carburetors only. Kit includes rebuild kit, bowl, nitrophyl float, lever and screws. Fits:Replacement Super "E" Shorty and OKO carburetorAdditional...

V-Twin - 35-1886 - Shorty Float Bowl AssemblyDescriptionShorty float bowl assemnbly fits Super "E" shorty and OKO carburetors only. Assembly includes float, lever assembly and screw set. Fits:Replacement Super "E" Shorty TOKO...

V-Twin - 35-1884 - Black Intake Manifold Clamp SetDescriptionBlack intake manifold clamp set is a two piece o-ring type.*NOTE: Must order o-ring seals separately. Fits:FX 1971-1977FL 1955-1977XL 1955-1977Additional Information OEM No.27063-57 UOM1 -...

V-Twin - 35-1883 - MR-3 Linkert Carburetor Body BrassDescriptionBare MR-3 Linkert carburetor body features brass construction. This 4 bolt flange type does not accept a choke mechanism.Replica of the WR racing carburetor! Fits:Replacement...

V-Twin - 35-1882 - MR-3 Linkert Carburetor BodyDescriptionBare MR-3 Linkert carburetor body features aluminum construction. This 4 bolt flange type does not accept a choke mechanism.Replica of the WR racing carburetor! Fits:Replacement...

V-Twin - 35-1881 - 40mm CV Carburetor BlackDescription40mm CV carburetor features a black finish and includes brass fuel fitting and dual cable bracket.Includes 1.6 main jet and 0.42 slow jet. ...

V-Twin - 35-1880 - OKO 42mm Flat Side Carburetor KitDescriptionOKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead...

V-Twin - 35-1879 - Linkert Carburetor Throttle Lever ArmDescriptionLinkert throttle lever arm.For use in linkert snap throttle. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use with...

V-Twin - 35-1878 - Linkert Cable BracketDescriptionLinkert cable bracket is for use with snap throttle kit.For use with threaded cable ferrule to accept universal cable. Fits:FL 1941-1965U 1937-1948EL 1936-1948Additional Information UOM1 - EA ...

V-Twin - 35-1877 - OKO 45mm Flat Side Carburetor KitDescriptionOKO 45mm flat side carburetor kit includes carburetor, breather bracket, and bolts for Evolution models.Uses stock choke cable included. Accepts CV air cleaner, not included. Redesigned with...

V-Twin - 35-1876 - Black Intake Manifold Clamp SetDescriptionBlack intake manifold clamp set is two piece type without seals. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog...

V-Twin - 35-1875 - Linkert Carburetor Throttle Arm ZicadDescriptionZicad plated throttle arm for linkert carburetors has 2 cable block holes.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits:FL 1948-1948Additional Information UOM1 - EA ...

V-Twin - 35-1873 - Snap Throttle KitDescriptionSnap throttle kit for Overhead Vavle M-74 model linkerts.Kit includes the cable, sleeve and bracket for the face of the carburetor. Fits:UL 1937-1948FL 1941-1965Additional Information UOM1 - KIT ...

V-Twin - 35-1872 - Replica Linkert Carburetor Float LeverDescription2021 New Production replica linkert carburetor float lever. Updated production gives a lighter profile, which makes it easier to make float setting adjustments.. Fits:FL 1941-1965EL...

V-Twin - 35-1871 - OKO 42mm Flatslide Carburetor KitDescriptionOKO 42mm carburetor kit is the flatslide style and includes the manifold, adapter flange, rubber seal and carburetor mount bracket.Mounts to existing 2 hole manifold. Includes breather bolts...

V-Twin - 35-1870 - Side Valve Linkert Snap Throttle KitDescriptionLinkert snap throttle kit converts Linkert carburetors to snap-on quick throttle operation.For use on 3 bolt flange Linkert carburetors. ...

V-Twin - 35-1855 - Bombsight Linkert M74 Carburetor BrassDescriptionBrass bombsight M-74 Linkert carburetor.Does not include hardware. Fits:FL 1948-1965Additional Information UOM1 - EA ManufacturerMotorshop OriginImported 2025 Catalog Pages707 ...

V-Twin - 35-1844 - Replica M74 Linkert Carburetor BrassDescriptionKnucklehead replica M74 brass Linkert carburetor. Includes the correct throttle arm installed. Fits:FL 1940-1947Additional Information UOM1 - EA ManufacturerMotorshop OriginImported ...

V-Twin - 35-1836 - inchL inch Series Linkert Float/Arm SetDescriptionThis series linker model float/arm set is our exclusive tooling, for exact Replica fit and function. Molded of nitrophyl material which is fuel resistant. Includes the wear block.Sold...

V-Twin - 35-1835 - Linkert DC Carburetor Bowl Nut Kit OversizeDescriptionLinkert DC carburetor bowl oversize nut kit includes an oversize stainless bowl nut, bowl nut tap, main nozzle, main nozzle tap, oversize gasket and spring. Fits:XL 1957-1966FL...

V-Twin - 35-1834 - Linkert DC Carburetor Bowl Nut KitDescriptionLinkert DC carburetor bowl nut kit includes a gasket, spring and stainless bowl nut. Fits:XL 1957-1966FL 1966-1966Additional Information OEM No.27375-57 UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1833 - Linkert DC Carburetor Low Speed Needle Valve StainlessDescriptionStainless linkert DC carburetor low speed needle valve. Fits:XL 1957-1966FL 1966-1966Additional Information OEM No.27339-57 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-1832 - Linkert DC Carburetor High Speed Needle Valve StainlessDescriptionStainless linkert DC carburetor high speed needle valve. Fits:XL 1957-1966FL 1966-1966Additional Information OEM No.27297-57 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-1831 - Linkert DC Carburetor Throttle DiscDescriptionLinkert DC carburetor throttle disc is the 9A type. Fits:XL 1957-1966FL 1966-1966Additional Information OEM No.27280-57 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-1830 - OKO 47mm Shorty Carburetor KitDescriptionPerformance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses...

V-Twin - 35-1827 - Linkert Carburetor Fixed JetDescriptionLinkert carburetor fixed jet #45 fits DC1L and DC7 Linkert carburetors. Fits:Special applicationAdditional Information UOM1 - EA ManufacturerV-Twin OriginUSA TypeLinkert 2025 Catalog Pages707

V-Twin - 35-1826 - Linkert Carburetor Fixed JetDescriptionLinkert carburetor fixed jet #5 fits M65, M84 and M97 Linkert carburetors. Fits:Special applicationAdditional Information UOM1 - EA ManufacturerV-Twin OriginUSA TypeLinkert 2025 Catalog...