V-Twin - 35-1767 - Throttle Friction PadDescriptionThrottle friction pad is for throttle by wire twist grips.Sold as a pack of 10. Fits:FLHT 2008-2013FLHTC 2008-2013FLHX 2008-2013FLHR 2008-2013Additional Information OEM No.56954-08 UOM10 - PK ...

V-Twin - 35-1765 - Replica M74 Linkert Carburetor CadmiumDescriptionReplica linkert M-74 carburetor is fully assembled with a cadmium body. All parts included as shown.1-1/2" carburetor assembly includes the top throttle arm assembly installed and with a...

V-Twin - 35-1764 - M-5 Carburetor Body Nickel PlatedDescriptionNickel plated M-5 carburetor body is milled to accept an overhead valve float bowl. Fits:EL 1936-1939Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Replacement...

V-Twin - 35-1763 - Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle. Fits:FL 1938-1958Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages708

V-Twin - 35-1761 - SV Linkert Side Valve Float Bowl AssemblyDescriptionLinkert Side Valve float bowl assembly includes a linkert carburetor float bowl assembly, replica linkert carburetor float lever, linkert nitrophyl carburetor float, linkert...

V-Twin - 35-1755 - Linkert M-74 Carburetor AssemblyDescriptionLinkert M-74 carburetor assembly includes installed "snap throttle" shaft. Shaft accepts OE stock snap throttle arrangement.Carburetor is the same as the ones supplied in our 74 Knucklehead...

V-Twin - 35-1751 - 40mm CV Carburetor KitDescription40mm CV carburetor kit includes a replica 40mm CV carburetor, manifold adapter, intake clamps, a late flat intake manifold seal and an adapter ring kit.Throttle is operated by single pull cable...

V-Twin - 35-1746 - Keihin Carburetor Jet ReplacementDescriptionKeihin carburetor jet replacement. Fits:XL 1976-1987FXST 1986-1992FL 1976-1980FLST 1986-1992Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeKeihin

V-Twin - 35-1745 - Keihin Carburetor Air NeddleDescriptionKeihin carburetor air neddle. Fits:XL 1976-1987FXST 1986-1992FL 1976-1980FLST 1986-1992Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1744 - Fuel Strainer Line FittingDescriptionFuel strainer line fitting to connect rubber fuel line to fuel strainer assembly.End is barbed to secure hose. A 1/2"-24 thread clamp is still needed at connection. Fits:FL 1950-1965Additional...

V-Twin - 35-1743 - CV Carburetor Adapter KitDescriptionCV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

V-Twin - 35-1738 - Replica Keihin Carburetor AssemblyDescriptionReplica butterfly type Keihin carburetor accepts all replacement OEM components. Complete carburetor assembly includes updated needle and jet with fuel passages.Keihin carburetor is single...

V-Twin - 35-1726 - Linkert M-74 Carburetor Hardware KitDescriptionLinkert M-74 1-1/2" throat carburetor hardware kit includes a nitrophyl "unsinkable" float and bean pot bowl. Fits:FL 1948-1965Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1725 - Overhead Valve Linkert Bean Pot Float BowlDescriptionOverhead valve bean pot float bowl features a milled flat top and includes the bowl nut.Components are fylly assembled. Customer must install per service manual. Larger diameter adds...

V-Twin - 35-1724 - CV Carburetor Manifold AdapterDescriptionCV carburetor manifold adapter accepts original 40mm CV intake manifold seals. Adapter features a natural aluminum finish.*NOTE: The carburetor must be supported for all installations. Fits:FLST...

V-Twin - 35-1723 - 1 inch Linkert Peak Seal SetDescription1" linkert peak seal set for Servi-cars with 1" bore linkert carburetors. Fits:G 1937-1957Additional Information UOM1 - SET ManufacturerV-Twin OriginImported

V-Twin - 35-1721 - Sifton Peak Seal Set for Linkert ManifoldsDescriptionSifton peak seal set for linkert manifolds, to replace stock brass sealing rings. The ultimate seal for peak performance.Sold as a pair. Fits:W 1936-1952Additional Information UOM1...

V-Twin - 35-1720 - SV Linkert Carburetor Bean Pot Bowl KitDescriptionLinkert carburetor bowl kit features a bowl with a "bean pot" style with a built in drain screw. This bowl is fitted with a hex cap, nitrophyl float, and float arm. Includes carburetor...

V-Twin - 35-1719 - Sifton Shorty Hyper-Jet KitDescriptionSifton brass carburetor hyper-jet kit increases fuel delivery and is for use on OKO and S+S 1-7/8" carburetors. Includes extra jets.Externally mounted 3rd fuel feed improves the performance of 2...

V-Twin - 35-1714 - OKO Performance 1-7/8 inch Shorty Carburetor KitDescription47mm alloy OKO performance 1-7/8" shorty carburetor kit includes the choke cable bracket, an alloy intake manifold and air cleaner. The accelerator pump nozzle is relocated for...

V-Twin - 35-1713 - Linkert Snap Throttle KitDescriptionLinkert snap throttle kit features a unique design revamped by Dan Henke and Rob Taylor from our Motor Shop. Kit is for use with M-74 carburetors. Includes shaft, throttle arm, cable end, shaft...

V-Twin - 35-1712 - Linkert Snap Throttle ShaftDescriptionLinkert snap throttle shaft for linkert 1-1/2" carburetors (M-74).*NOTE: The shaft is longer to accommodate lower spring installation. Fits:FL 1941-1965Additional Information UOM1 - EA ...

V-Twin - 35-1711 - Linkert Snap Throttle Shaft Return SpringDescriptionLinkert snap throttle return spring.For use in linkert snap throttle. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use...

V-Twin - 35-1709 - Bean Pot M74 Linkert CarburetorDescriptionM-74 Linkert carburetor is fitted with Bean Pot bowl. Features Linkert carburetor body with a 4 bolt mount flange with full brass construction. All linkerts are supplied in a natural finish,...

V-Twin - 35-1708 - OKO 38mm WL and L Carburetor KitDescriptionFor 45 WL and G models. Kit includes a 38mm flat side TC carburetor with a choke mechanism, cable, 3 bolt flange adapter and a twist grip set.Carburetor is OKO brand. Must order the cast iron...

V-Twin - 35-1707 - Intake Manifold Conversion Nipple SetDescriptionIntake manifold conversion nipple set adapts 1-15/16-20 threaded nuts to 1-11/16-20 cylinder ports. Set has a zinc plated finish.These threaded nipples allow the WR style manifold to be...

V-Twin - 35-1702 - inchL inch Series Choke Shaft Lever AssemblyDescriptionL" Series choke shaft lever assembly for S & S "L" Series carburetors with 1-7/8" bore. Fits:Replacement application for S&S "L" series carburetorAdditional Information ...

V-Twin - 35-1701 - SV Linkert Bean Pot Bowl AssemblyDescriptionBean pot linkert bowl assembly is for all Side Valve models. Bowl features hex cap over the needle seat chamber.Assembled in the motor shop with the correct float position, and sealed mount...

V-Twin - 35-1698 - inchR inch Linkert Fuel FittingDescriptionR" Linkert fuel fitting with short nut is machined of brass and accepts a 3/8" hose for threading on all Linkert needle seat fittings on Harley models Fits:FL 1941-1965EL 1936-1952W...

V-Twin - 35-1683 - M74 Linkert Carburetor AssemblyDescriptionM74 Linkert carburetor assembly features a brass finish. Assembly is for use with Knuckleheads and includes the the correct throttle arm installed. Fits:FL 1941-1947Additional Information UOM1...

V-Twin - 35-1681 - OKO Performance 1-7/8 inch Shorty Carburetor KitDescriptionKit includes a chrome billet carburetor bracket kit, which features an integral breather passage to air intake, and a 1-7/8" alloy finish OKO performance shorty carburetor...

V-Twin - 35-1680 - CV XL Carburetor Manifold NaturalDescriptionCV XL carburetor manifold, for converting EFI models to CV carburetor units, features a natural finish.Re-use manifold flanges. *NOTE: Module ignition recalibration necessary. ...

V-Twin - 35-1679 - Linkert M5 Carburetor Rebuild KitDescriptionReplica Linkert M5 carburetor rebuild kit. Fits:EL 1936-1939Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

V-Twin - 35-1677 - Sifton Peak Seal Set for Linkert ManifoldsDescriptionSifton peak seal set for linkert manifolds, is the exact replacement for original brass seal rings. The ultimate seal for peak performance.Sold as a pair. Fits:EL 1936-1940U...

V-Twin - 35-1676 - 1/2 inch Breather Bolt SetDescriptionZinc 1/2" breather bolt set for breather brackets.Sold in a quantity of 2. Fits:XL 1991-UPAdditional Information UOM1 - SET ManufacturerV-Twin OriginImported Tech NoteSuggested to use with...

V-Twin - 35-1674 - Indian Linkert Choke Disc KitDescriptionIndian linkert choke disc kit includes disc, shaft and an angled lever as original, on 3-bolt linkert brass carburetors. Fits:Chief 1933-1952Additional Information UOM1 - KIT ManufacturerV-Twin...

V-Twin - 35-1673 - inchL inch Series Carburetor Choke Disc AssemblyDescriptionL" Series carburetor kit includes choke disc, screws and washers, shaft, external lever, and detent spring for 1-7/8" S&S "L" type carburetors.For S & S "L" Series carburetors...

V-Twin - 35-1669 - Sifton Manifold Nut and Seal SetDescriptionIncludes 2 parkerized manifold nuts and 2 peak seals. Fits:FL 1941-1954Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages712 Replacement Items35-1655 -...

V-Twin - 35-1668 - 40mm CV Carburetor KitDescription40mm CV carburetor kit includes a 40mm CV carburetor, manifold, manifold flange kit and support bracket with the integral breather.The manifold does not have provisions for map sensor or other pollution...

V-Twin - 35-1667 - Linkert Needle and Seat KitDescriptionLinkert needle and seat includes 90  fitting to accepts hose. Fits:UL 1941-1965FL 1941-1965EL 1941-1965W 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement...