V-Twin - 35-1029 - OKO 40mm CV Carburetor BlackDescriptionBlack finish OKO 40mm CV carburetor is for 1340 models and is an accurate reproduction of the Venerable Keihin CV carburetor.Includes 1.9 main jet and a .046 slow jet installed. Must order related...

V-Twin - 35-1028 - Throttle By Wire Throttle Housing ChromeDescriptionThrottle housing features a chrome finish and is for use with throttle by wire applications. Fits:Custom throttle by wire applicationsAdditional Information UOM1 - EA ...

V-Twin - 35-1027 - Push In Throttle Housing ChromeDescriptionThrottle housing features a chrome finish and is for use with 1996-up push in type cables. Fits:FL 1996-UP push in style cablesAdditional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - 35-1026 - Dual Cable Throttle Housing ChromeDescriptionThrottle housing features a chrome finish and is for use with 1981-1995 dual cables. Fits:FL 1981-1995Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1025 - 47mm OKO Shorty Carburetor Kit AlloyDescriptionAlloy kit includes a natural 47mm shorty OKO carburetor, push-pull cable type, one piece manifold, with mount flanges and a round mesh air cleaner.Carburetor is OKO brand,...

V-Twin - 35-1021 - Side Valve Linkert Carburetor Bean Pot Style Float Bowl KitDescriptionLinkert carburetor float bowl with early style hex cap features a natural aluminum finish and is the bean pot style with additional capacity. For Flathead models...

V-Twin - 35-1019 - EFI Fuel Line O-Ring Service KitDescriptionEFI fuel line o-ring service kit includes all o-rings necessary to service the internal and external fuel lines on all models. Fits:All modelsAdditional Information UOM1 - KIT ...

V-Twin - 35-1018 - EFI Fuel LineDescriptionEFI fuel line replaces the fuel line from the tank to the fuel rail. Fits:FLT 2012-2016Additional Information OEM No.61208-10 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-1017 - Linkert Needle Valve Lever CadmiumDescriptionCadmium plated needle valve lever with the detent ball installed.Order related parts or kit separately. Fits:FL 1941-1965U 1937-1948W 1937-1952EL 1936-1952Additional Information UOM1 - EA ...

V-Twin - 35-1015 - Overhead Valve Linkert Carburetor Float Bowl BrassDescriptionOverhead valve linkert carburetor float bowl features a brass construction, with a flat top and provision for drain screw hole.Includes linkert carburetor float pivot pin...

V-Twin - 35-1014 - OKO Shorty 47mm CarburetorDescription47mm OKO shorty carburetor with an updated cast body and flat front located on the bowl surface.We suggest using Loctite for proper installation. Fits:Custom applicationAdditional Information UOM1...

V-Twin - 35-1009 - Linkert-CV 3 Bolt Carburetor AdapterDescriptionLinkert-CV carburetor adapter is machined from aluminum and adapts CV carburetors to 3 bolt linkert manifolds on Side Valve Harley's and Indians.Includes the following; 27397-27,...

V-Twin - 35-1008 - Linkert Needle Valve Lever BrassDescriptionLinkert needle valve lever features a brass finish with the detent ball installed.Order related parts or kit separately. Fits:FL 1941-1965U 1937-1948W 1937-1952EL 1936-1952Additional...

V-Twin - 35-1007 - SV Replica Linkert Carburetor Float Bowl BrassDescriptionReplica linkert carburetor float bowl features a brass construction for Side Valve models.Inlcudes 9/16 x 20 hex plug, with washer for bowl extension. Float bowl does have drain...

V-Twin - 35-1006 - Shorty E Carburetor Jet KitDescriptionShorty E carburetor jet kit for OKO and S&S carburetors, B, E, and G series 47mm or 1-7/8".Low range kit contains one of each of the following intermediate jets: (.0265, .028, .0295) and one each...

V-Twin - 35-1005 - Keihin Jet Kit 40 PiecesDescription40 piece Keihin jet kit includes 30 main jets and 10 slow jets. Features sizes ranging from #32 to #110. Fits:ReplacementAdditional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-1004 - Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle. Fits:DLX 1924-1940Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-1002 - Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle. Fits:Chief 1942-1948Additional Information OEM No.601002 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-1001 - Carburetor Air Intake Shaft StopDescription2023 New Production linkert carburetor air intake shaft stop.*NOTE: Flat on one side. Fits:FL 1941-1965Additional Information OEM No.27219-36 UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1000 - Linkert Needle Valve Lever Kit BrassDescription2023 New Production brass linkert needle valve lever kit includes the shoulder bolt, spring, spring seat collar and arm.This is a 4 piece kit. *NOTE: Needle not included. Fits:FL...

V-Twin - 35-0998 - inchL inch Series Throttle Arm KitDescriptionThrottle arm kit is for use on "L" series carburetors with single or dual cable application. Must be spring activated for operation. Kit includes shaft, door, dual hole arm and screws.*NOTE:...

V-Twin - 35-0997 - Indian Linkert Needle and Seat Kit Description Features a matched needle and seat assembly for Linkert carburetors on Indian model.The tip is metal. The gas line fitting end is 1/8" NPT. For use in Indian linkert carburetors only. ...

V-Twin - 35-0995 - Carburetor Main Jet Assortment SetDescriptionAftermarket carburetor main jet replacement assortment set is for S&S "B", "E", "G" and OKO carburetors. Includes 7 intermediate jets and 12 main jets.Sold as a 19 piece set. Assortment...

V-Twin - 35-0994 - OKO Performance 1-7/8 inch Shorty Carburetor Dark GreyDescriptionOKO performance shorty carburetor features a "gun" metal dark grey anodized finish and accepts S&S bolt pattern air filter assemblies. It has a relocated accelerator pump...

V-Twin - 35-0993 - Linkert Carburetor Indian KitDescriptionLinkert carburetor kit includes correct needle and seat for brass linkerts fitted to 1935-1951 Indians.The threads on the brass fitting with 1/8" NPT. *NOTE: Black nitrophyl float and gaskets...

V-Twin - 35-0992 - OKO Performance Shorty 47mm Carburetor PolishedDescriptionPolished OKO performance shorty 47mm carburetor features a 90  steel elbow for fuel line. Carburetor will accept S&S bolt pattern air assemblies.Includes relocated accelerator...

V-Twin - 35-0991 - OKO Performance 1-7/8 inch Shorty CarburetorDescriptionAlloy OKO performance shorty carburetor will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. For Big Twin...

V-Twin - 35-0990 - 40mm CV Carburetor Assembly BlackDescription40mm CV carburetor features a black finish and is without accessories.The main jet installed is #190. Carburetor includes bracket for dual push-pull...

V-Twin - 35-0989 - inchR inch Linkert Fuel FittingDescriptionR" linkert fuel fitting is machined of brass and accepts a 3/8" hose for threading on all linkert needle seat fittings on Harley.*NOTE: When installing, check the length of the hex nut to make...

V-Twin - 35-0988 - 3/8 inch Fiber WasherDescription3/8" electrical insualting fiber washer. Fits:Replacement application for S&S "L" series carburetorsAdditional Information UOM100 - PK MeasurementsAdditional InformationInner Diameter: ...

V-Twin - 35-0986 - Linkert Indian Throttle Arm Cadmium PlatedDescriptionCadmium plated lnkert Indian throttle arm is for linkert 3 bolt brass carburetors. Fits:Chief 1935-1953Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog...

V-Twin - 35-0981 - Carburetor Throttle Return Spring KitDescriptionKit provides a return spring action for the throttle of an S&S "MGL" and "B" series carburetor.Kit includes shaft, stop plate and spring. Fits:All S&S "B" Style...

V-Twin - 35-0980 - Sifton inchL inch Series Carburetor Float Bowl AssemblyDescriptionCarburetor float bowl assembly includes float, needle and seat, pivot pin with arm, float gasket, and brass plug with gasket to fit all "L" series S&S carburetors,...

V-Twin - 35-0979 - OKO 3/8 inch NPT Hex Petcock PolishedDescriptionOKO polished 3/8" NPT hex body petcock with downward facing 5/16 fuel spigot.Does not include 22mm nut. Includes stainless steel screen. Fits:FL 1966-1974XL 1955-1974Additional...

V-Twin - 35-0978 - S&S Carburetor NeedleDescriptionS&S carburetor needle for "E" carburetor. Fits:Replacement application for S&S E CarburetorAdditional Information UOM1 - EA ManufacturerS&S Cycle OriginUSA 2025 Catalog Pages394

V-Twin - 35-0977 - inchL inch Series Carburetor BodyDescriptionL" Series 1-7/8" bore carburetor body is cast aluminum.Body casting is an exact replica of the "L" series Linkert MGL gas carburetor design produced by S&S in 1980-81. Body has 1-7/8" bore...

V-Twin - 35-0976 - Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle fits early Harley & Indian Schebler bodies such as DLX 20's DLX36, 38, 45, etc. Fits:Early Indian Schebler, DLX20, DLX36, DLX38, DLX45Additional Information OEM...

V-Twin - 35-0975 - Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle. Fits:XL 1957-1965Additional Information OEM No.27331-57 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-0974 - Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle. Fits:EL 1936-1939Additional Information OEM No.1258-36 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-0973 - Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle. Fits:Chief 1941-1952Additional Information OEM No.102628 UOM1 - EA ManufacturerV-Twin OriginUSA