V-Twin - 35-0891 - Petcock Adapter Set ChromeDescriptionChrome petcock adapter set is used for converting Magneti Marelli injection to carburetor system.Includes fuel outlet plug. Petcock adapter set can be used with any 22 mm petcock. Fits:FLT...

V-Twin - 35-0890 - CV Carburetor Choke Cable Mount Stainless SteelDescriptionCV carburetor choke cable mount features a stainless steel finish. Fits:FX 1993-2006XL 1988-2006Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-0889 - XL Intake Flange KitDescriptionXL intake flange kit includes two zinc plated intake flanges, two intake manifold seals and four allen screws, for EFI 2007-up XL applications. Fits:XL 2007-UPAdditional Information UOM1 - KIT ...

V-Twin - 35-0888 - 47mm OKO Shorty Carburetor Kit AlloyDescriptionAlloy peformance 1-7/8" shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response.This is the R-2...

V-Twin - 35-0887 - Linkert to CV Carburetor AdapterDescriptionThis carburetor adapter is machined from billet stock with a natural finish. Allows the installation of the 40mm CV carburetor 4 bolt linkert to Big Twin manifold.For use with 40mm CV...

V-Twin - 35-0886 - Fuel Strainer Filter NickelDescriptionFuel strainer features a nickel finish over a machined red brass.Nickel fuel strainer is specifically for 1936-1937 M-5 linkert carburetors. Screen and gaskets not included. Must order filter...

V-Twin - 35-0885 - Linkert Carburetor SpacerDescriptionThis insulator spacer is for a 3-bolt, 1-3/8" throat diameter Linkert carburetor to manifold. No gasket is required with the use of this spacer.This spacer is a plastic replica of the original...

V-Twin - 35-0884 - Linkert Carburetor VenturiDescriptionThis Venturi will downsize the 4-bolt M-74 1-1/2" brass Linkert carburetor so that it can be used on a flathead model that originally had a 1-1/4" carburetor.This Venturi will allow the atmospheric...

V-Twin - 35-0883 - Zicad Left Side PetcockDescriptionLeft side petcock features 3/8"-18 National Pipe Thread, the body is machined from brass and the handle is steel, and has a zicad finish.*NOTE: Diassemble petcock, remove cotter pin, and use fine...

V-Twin - 35-0882 - Replica Petcock Nickel PlatedDescriptionNickel plated petcock features 1/8"-27 NPT on the side fitting the gas tank and 1/2"-24 NPT on fuel line connection side.*NOTE: Diassemble petcock, remove cotter pin, and use fine compound to...

V-Twin - 35-0881 - Zicad Right Side PetcockDescriptionZicad right side petcock features 1/8"-27 NPT on the side fitting the gas tank and 1/2"-24 NPT on fuel line connection side. Petcock is machined from brass.*NOTE: Diassemble petcock, remove cotter...

V-Twin - 35-0879 - Copper Fuel Strainer without ScreenDescriptionFuel strainer is machined from copper that features a natural finish.The inlet and outlet fittings are 7/16" x 20 TPI. The nut is features a 7/16"-24 thread SAE. *NOTE: Must order filter...

V-Twin - 35-0876 - Gasket and Screw KitDescriptionGasket and screw kit for gas tank sender units. Fits:FLT 1988-1995Additional Information UOM1 - KIT ManufacturerTri Starr OriginUSA Tech NoteSuggested to use with #35-0602 Gas Tank Sender Unit.

V-Twin - 35-0873 - Linkert Carburetor Overhaul KitDescription18pc Linkert carburetor overhaul kit for 3-bolt linkerts with 1-1/4" throat. Kit includes black float, bushings, springs, float pin, stainless steel needle, brass seat and a 3-bolt insulator...

V-Twin - 35-0872 - Cadmium Choke Lever AssemblyDescriptionCadmium choke lever assembly includes mount stud and thumb lever. Fits:EL 1936-1937Additional Information UOM1 - EA ManufacturerSifton OriginImported 2025 Catalog Pages711

V-Twin - 35-0870 - OKO Performance 1-7/8 inch Shorty Carburetor KitDescriptionKit includes a chrome billet carburetor bracket kit, which features an integral breather passage to air intake, and a 1-7/8" alloy finish OKO performance shorty carburetor...

V-Twin - 35-0868 - 1/4 NPT-22MM Petcock Adapter NutDescriptionBrass Petcock adapter nut is for connecting 1/4" NPT petcock to 22mm petcock on male fuel tank set. To use with S&S and OKO carburetor. Fits:Custom application for S&S and OKO...

V-Twin - 35-0867 - Oversize Carburetor Throttle DiscDescriptionLinkert 1-1/2" carburetor throttle disc is standard size with correct bevel and #9-x marking.Throttle disc is not perfectly round, it has more of a slight oval shape. Fits:FL...

V-Twin - 35-0866 - Linkert Carburetor Throttle Lever CadmiumDescriptionLinkert carburetor throttle lever is constructed of investment cast steel and has a cadmium plated finish. Fits:WL 1937-1952UL 1937-1948G 1937-1956Additional Information UOM1 - EA ...

V-Twin - 35-0865 - Dual Cable Throttle HousingDescriptionDual cable throttle housing features threaded cable inserts for dual cable push pull operation applications, in a black finish.*NOTE: Must order the dual type handlebar throttle tube separately...

V-Twin - 35-0863 - Intake Manifold Nut and Seal KitDescriptionParkerized intake manifold nuts with brass seals.Note: For use with a 3-bolt 61" manifold on large port knuckleheads. ...

V-Twin - 35-0862 - Oversize Carburetor Throttle DiscDescriptionLinkert 1-1/2" carburetor throttle disc is .030 oversize with correct bevel.Throttle disc is not perfectly round, it has more of a slight oval shape. Fits:FL 1951-1965Additional Information ...

V-Twin - 35-0861 - Oversize Carburetor #12 Throttle DiscDescriptionLinkert 1-1/2" carburetor throttle disc is .025" oversize with correct bevel. Fits:FL 1940-1950FL 1952 61" OHVAdditional Information OEM No.27280-40A UOM1 - EA ManufacturerV-Twin ...

V-Twin - 35-0860 - Oversize Carburetor Throttle Disc for 1-1/4 CarburetorDescriptionCarburetor throttle disc is .025 oversize. Used for 1-1/4" carburetor that requires an oversized throttle disc due to wear. Fits:WL 1929-1952Additional Information OEM...

V-Twin - 35-0857 - Old School 1 inch Throttle ChromeDescriptionOld school 1" throttle features a chrome finish. For use with single cable applications and requires seperate purchase of throttle tube. Fits:Custom ApplicationAdditional Information UOM1 -...

V-Twin - 35-0856 - Old School 1 inch Throttle BlackDescriptionOld school 1" throttle features a black finish. For use with single cable application and requires seperate purchase of throttle tube. Fits:Custom ApplicationAdditional Information UOM1 - EA ...

V-Twin - 35-0854 - Carburetor EnrichmentDescriptionCarburetor enrichment is 3-position with o-ring knob for S&S Super "E" & "G" carburetors. Fits:Replacement application for S&S Super E and G CarburetorAdditional Information UOM1 - EA ...

V-Twin - 35-0853 - Linkert Carburetor Bowl Zinc Lock NutDescriptionLinkert carburetor bowl lock nut has a zinc finish. 4-piece kit includes large nut with stud, lock washer lock nut, and copper filled seal washer. The nuts are 3/4 X 20 thread. Fits:FL...

V-Twin - 35-0852 - Keihin Carburetor Heavy Duty Diaphragm PumpDescriptionHeavy duty Keihin carburetor diaphragm pump.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FL 1985-1989FX 1976-1984FXR 1982-1989Additional Information OEM No...

V-Twin - 35-0851 - Linkert Carburetor Bombsight Venturi With ToolDescriptionBombsight Venturi fits 1-1/2" M74 brass Linkert carburetors and is the performance dual venturi used on WR, MR-3, MR-4, KR and KH models. Has a 1-/32" inner tube suspended in the...

V-Twin - 35-0850 - Carburetor Body Rebuild KitDescriptionReplacement carburetor body rebuild kit for S&S Super "E" and OKO carburetors, includes accelerator pump boot, o-ring, gaskets, throttle shaft, throttle door and throttle shaft return springs.This...

V-Twin - 35-0848 - 38mm OKO Flatslide CarburetorDescriptionSpigot mount OKO carburetor features built in choke activator.Carburetor is OKO brand. Must order the air cleaner adapter, which will allow the choice of CV air cleaners, separately. Fits:XL...

V-Twin - 35-0847 - M-74 Linkert Parts Kit CadmiumDescriptionM-74 linkert parts kit features a cadmium finish and includes restoration requirements for M-74 carburetors.*NOTE: Recommend to use kit when the carburetor body is painted black. Fits:FL...

V-Twin - 35-0845 - Linkert DC Needle and Seat SetDescriptionLinkert needle and seat set features a brass machined body, the needle is stainless steel and includes the gas vent. For the late die cast aluminum linkerts.Accepts a 5/16" inner diameter rubber...

V-Twin - 35-0844 - Replica Zinc Plated Intake ManifoldDescriptionReplica zinc plated intake manifold features a longer lip for attaching o-ring and flat seals, with stainless steel V-Twin clamp with shoe.This intake manifold will help improve the...

V-Twin - 35-0843 - XL CV Carburetor Bracket with BreatherDescription2020 New Production XL CV carburetor bracket with breather, mounts CV carburetors to fuel injected models and allows mounting of CV air cleaners. Features a natural alloy finish.For S&S...

V-Twin - 35-0841 - 34mm Spigot Mount CarburetorDescription34mm spigot mount carburetor.Carburetor is OKO brand. Must order air cleaner adapter, which will allow the choice of CV air cleaners, separately. Fits:WL 1936-1952Additional Information UOM1 - EA...

V-Twin - 35-0839 - XL EFI Breather Bolt Set 2 inch Description 2" long breather bolt set for use with shorty carburetor mount brackets.Set is for S&S and OKO shorty carburetor installations. Fits: XL 1991-UP Additional...

V-Twin - 35-0838 - 4-1/4 inch Petcock Nylon ScreenDescription4-1/4" Nylon petcock screen. Fits:FLT 2002-2006FXST 2002-2006FXD 2002-2006FLST 2002-2006XL 1995-UPAdditional Information OEM No.62166-02 UOM1 - EA ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-0835 - Petcock ScreenDescriptionPetcock replacement filter screen. Fits:Replacement application for petcocks with 3/8" NPT threadAdditional Information UOM5 - PK ManufacturerV-Twin OriginImported 2025 Catalog Pages1194 Tech NoteFor...