V-Twin - 35-0856 - Old School 1 inch Throttle BlackDescriptionOld school 1" throttle features a black finish. For use with single cable application and requires seperate purchase of throttle tube. Fits:Custom ApplicationAdditional Information UOM1 - EA ...

V-Twin - 35-0854 - Carburetor EnrichmentDescriptionCarburetor enrichment is 3-position with o-ring knob for S&S Super "E" & "G" carburetors. Fits:Replacement application for S&S Super E and G CarburetorAdditional Information UOM1 - EA ...

V-Twin - 35-0853 - Linkert Carburetor Bowl Zinc Lock NutDescriptionLinkert carburetor bowl lock nut has a zinc finish. 4-piece kit includes large nut with stud, lock washer lock nut, and copper filled seal washer. The nuts are 3/4 X 20 thread. Fits:FL...

V-Twin - 35-0852 - Keihin Carburetor Heavy Duty Diaphragm PumpDescriptionHeavy duty Keihin carburetor diaphragm pump.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FL 1985-1989FX 1976-1984FXR 1982-1989Additional Information OEM No...

V-Twin - 35-0851 - Linkert Carburetor Bombsight Venturi With ToolDescriptionBombsight Venturi fits 1-1/2" M74 brass Linkert carburetors and is the performance dual venturi used on WR, MR-3, MR-4, KR and KH models. Has a 1-/32" inner tube suspended in the...

V-Twin - 35-0850 - Carburetor Body Rebuild KitDescriptionReplacement carburetor body rebuild kit for S&S Super "E" and OKO carburetors, includes accelerator pump boot, o-ring, gaskets, throttle shaft, throttle door and throttle shaft return springs.This...

V-Twin - 35-0848 - 38mm OKO Flatslide CarburetorDescriptionSpigot mount OKO carburetor features built in choke activator.Carburetor is OKO brand. Must order the air cleaner adapter, which will allow the choice of CV air cleaners, separately. Fits:XL...

V-Twin - 35-0847 - M-74 Linkert Parts Kit CadmiumDescriptionM-74 linkert parts kit features a cadmium finish and includes restoration requirements for M-74 carburetors.*NOTE: Recommend to use kit when the carburetor body is painted black. Fits:FL...

V-Twin - 35-0845 - Linkert DC Needle and Seat SetDescriptionLinkert needle and seat set features a brass machined body, the needle is stainless steel and includes the gas vent. For the late die cast aluminum linkerts.Accepts a 5/16" inner diameter rubber...

V-Twin - 35-0844 - Replica Zinc Plated Intake ManifoldDescriptionReplica zinc plated intake manifold features a longer lip for attaching o-ring and flat seals, with stainless steel V-Twin clamp with shoe.This intake manifold will help improve the...

V-Twin - 35-0843 - XL CV Carburetor Bracket with BreatherDescription2020 New Production XL CV carburetor bracket with breather, mounts CV carburetors to fuel injected models and allows mounting of CV air cleaners. Features a natural alloy finish.For S&S...

V-Twin - 35-0841 - 34mm Spigot Mount CarburetorDescription34mm spigot mount carburetor.Carburetor is OKO brand. Must order air cleaner adapter, which will allow the choice of CV air cleaners, separately. Fits:WL 1936-1952Additional Information UOM1 - EA...

V-Twin - 35-0839 - XL EFI Breather Bolt Set 2 inch Description 2" long breather bolt set for use with shorty carburetor mount brackets.Set is for S&S and OKO shorty carburetor installations. Fits: XL 1991-UP Additional...

V-Twin - 35-0838 - 4-1/4 inch Petcock Nylon ScreenDescription4-1/4" Nylon petcock screen. Fits:FLT 2002-2006FXST 2002-2006FXD 2002-2006FLST 2002-2006XL 1995-UPAdditional Information OEM No.62166-02 UOM1 - EA ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-0835 - Petcock ScreenDescriptionPetcock replacement filter screen. Fits:Replacement application for petcocks with 3/8" NPT threadAdditional Information UOM5 - PK ManufacturerV-Twin OriginImported 2025 Catalog Pages1194 Tech NoteFor...

V-Twin - 35-0834 - Petcock ScreenDescriptionPetcock replacement filter screen.Reserve tube not included. Fits:Replacement application for petcocks with 13/16" nut connectionAdditional Information UOM5 - PK MeasurementsAdditional InformationOuter...

V-Twin - 35-0833 - Linkert Carburetor Needle and Seat KitDescriptionReplica needle and seat set is constructed of a brass seat and a fitted extended viton tip needle.Threads on this needle and seat assembly is 7/16 x 27. Includes gasket. *NOTE: Needle...

V-Twin - 35-0829 - Oversize Linkert Carburetor Throttle DiscDescriptionLinkert carburetor throttle disc is .020 oversize and is for a 1-1/2" carburetor. Fits:FL 1941-1965Additional Information UOM1 - EA MeasurementsAdditional InformationOuter Diameter:...

V-Twin - 35-0828 - Oversize Linkert Carburetor Throttle DiscDescriptionLinkert carburetor throttle disc is .010 oversize and is for a 1-1/2" carburetor. Fits:FL 1951-1965Additional Information UOM1 - EA MeasurementsAdditional InformationOuter Diameter:...

V-Twin - 35-0827 - Oversize Linkert Carburetor Throttle DiscDescriptionLinkert carburetor throttle disc is .005 oversize and is for a 1-1/2" carburetor. Fits:FL 1951-1965Additional Information UOM1 - EA MeasurementsAdditional InformationOuter Diameter:...

V-Twin - 35-0826 - Intake Manifold Nut and Seal KitDescriptionIntake manifold nut and seal kit is for linkert carburetors and plumber type manifolds.Includes two parkerized nuts and two machined brass seals. Fits:FL 1941-1954EL 1940-1952Additional...

V-Twin - 35-0822 - Linkert Carburetor Needle and Seat KitDescriptionReplica needle and seat set is constructed of a brass seat and a fitted solid stainless steel needle.Needle kit is fitted with a solid stainless steel needle.Threads on this needle and...

V-Twin - 35-0821 - Mikuni Carburetor Rebuild KitDescriptionCarburetor rebuild kit for Mikuni carburetor includes flow fuel hose, throttle valve seal, float bowl seal o-ring, and carburetor top gasket. Fits:Custom application for HSR-42/HSR-45...

V-Twin - 35-0819 - Mikuni HSR-45 Carburetor Jet NeedleDescriptionMikuni HSR-45 carburetor jet needle, 96. Fits:Replacement application for Mikuni HRS-42 carburetorAdditional Information UOM1 - EA ManufacturerSudco OriginImported TypeMikuni 2025...

V-Twin - 35-0816 - Mikuni HSR-42 Carburetor Jet NeedleDescriptionMikuni HSR-42 carburetor jet needle, 96. Fits:Replacement application for Mikuni HRS-42 carburetorAdditional Information UOM1 - EA ManufacturerSudco OriginImported TypeMikuni 2025...

V-Twin - 35-0801 - Mikuni Carburetor Pilot JetDescriptionMikuni carburetor pilot jet is 25.0. Fits:Replacement application for Mikuni HRS-42 carburetorAdditional Information UOM1 - EA ManufacturerSudco OriginImported TypeMikuni 2025 Catalog Pages398...

V-Twin - 35-0800 - Mikuni Carburetor Pilot JetDescriptionMikuni carburetor pilot jet is 22.5. Fits:Replacement application for Mikuni HRS-42 carburetorAdditional Information UOM1 - EA ManufacturerSudco OriginImported TypeMikuni 2025 Catalog Pages398...

V-Twin - 35-0799 - Zicad Plated 45 inch Intake Manifold KitDescriptionFlathead zicad plated intake manifold kit has brass packing rings and parkerized nuts.*NOTE:: Zicad is a dull shade of zinc similar to cadmium. Fits:G 1937-1973W 1937-1952Additional...

V-Twin - 35-0795 - Brass Linkert Carburetor Throttle LeverDescriptionLinkert carburetor throttle lever features a natural brass finish.Lever features one hole for cable block location. Fits:UL 1937-1948WL 1937-1952G 1936-1956Additional Information OEM...

V-Twin - 35-0791 - Breather Bolt Set ChromeDescriptionChrome breather bolt set. Bolt has a 1/2 X 13 thread and are 1-3/4" long.Bolt location, center to center, on Big Twin models is 15cm. Fits:FXD 1992-1998FLST 1992-1998FXST 1992-1999XL 1991-UPFXR...

V-Twin - 35-0790 - Linkert Carburetor Overhaul KitDescriptionLinkert carburetor kit includes foam float, bushings, springs, float pin and gaskets. Float is molded with nitrophyl material which is fuel resistant. Fits:WL 1933-1952UL 1937-1948FL...

V-Twin - 35-0788 - inchL inch Series Dual Carburetor Bowl KitDescriptionL" series dual carburetor bowl kit inlcudes a mount plate and 2 complete bowl assemblies with the float, needle and seat.Reproduction of the original "L" series bowls! Requires 1/4 x...

V-Twin - 35-0787 - Intake Manifold Flange Set BilletDescriptionBillet intake manifold flange set for use when installing larger throttle bodies for EFI. Fits:FLST 2007-2017FXD 2007-2017FXST 2007-2017Additional Information UOM1 - KIT ManufacturerSifton ...

V-Twin - 35-0784 - Cadmium Linkert Carburetor Throttle LeverDescriptionLinkert carburetor throttle lever is cadmium plated, for Overhead Valve Knuckleheads.Lever features one hole for cable block location. Fits:FL 1940-1947Additional Information OEM No...

V-Twin - 35-0781 - Linkert Needle Valve Lever Kit CadmiumDescription2023 New Production linkert carburetor needle valve lever includes the shoulder bolt, spring collar, seat and brass needle valve lever. Lever is cadmium plated.. Fits:FL...

V-Twin - 35-0780 - Cadmium Linkert Carburetor Throttle LeverDescriptionCadmium plated linkert carburetor throttle lever.Lever features two holes for cable block location. Fits:FL 1948-1948Additional Information OEM No.1238-48 UOM1 - EA ...

V-Twin - 35-0779 - 1/4 inch Turn Twist Grip AssemblyDescriptionHandlebar throttle assembly allows fast action on standard 1" handlebars with pull type throttle application using a cable. Features a bright alloy finish with steel tube. Adjuster included...

V-Twin - 35-0776 - XL EFI Breather Bolt KitDescriptionEFI breather bolt kit for 2007-up XL model with carburetor installation. Kit includes 1/2" bolts and 1/2" spacers with washer set. Features a zinc plated finish. Fits:XL 2007-UPAdditional Information ...

V-Twin - 35-0773 - Fuel Check ValveDescriptionFuel check valve. Fits:XL 2007-2020Additional Information OEM No.75309-07A UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages991

V-Twin - 35-0772 - Fuel Check Valve AssemblyDescriptionFuel check valve assembly includes the check valve, fittings and line. Fits:FLST 2008-2017FXST 2008-2017Additional Information OEM No.62189-08 UOM1 - EA ManufacturerV-Twin OriginImported 2025...