V-Twin - 35-0575 - Sifton Chrome Petcock Forward FacingDescriptionSifton chrome petcock forward facing with 3/8" outlet with nut.Petcock features solid brass construction with on and off and reserve positions and screen. Designs are made for a seated...

V-Twin - 35-0574 - Carburetor Choke Cable Bracket Stainless SteelDescriptionStainless steel choke cable bracket that relocates cable and knob assembly to the bottom of the carburetor, attaches to the accelerator pump and moves stock cable and knob out of...

V-Twin - 35-0573 - Air Cleaner Breather Kit BlackDescriptionAir cleaner breather kit features a black finish and fits 1991-2017 Sportster models. Fits:XL 1991-2017Additional Information OEM No.29281-91 UOM1 - KIT ManufacturerSifton OriginImported ...

V-Twin - 35-0572 - Air Cleaner Breather Kit BlackDescriptionAir cleaner breather kit features a black finish and fits 1993-2017 Big Twin models.Bolt location, center to center, on Big Twin models is 15cm. Fits:FXST 1993-2015FLST 1993-2015FLT 1993-2017FXD...

V-Twin - 35-0571 - 40mm CV Carburetor NaturalDescriptionNatural finish 40mm CV carburetor is for 1340 models and is an accurate reproduction of the Venerable Keihin CV carburetor.Includes 1.9 main jet and a .046 slow jet installed. Must order related...

V-Twin - 35-0570 - Petcock Right Outlet BlackDescriptionBlack petcock with right outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information UOM1...

V-Twin - 35-0568 - 3-1/2 inch Petcock Nylon ScreenDescription3-1/2" Nylon petcock screen for use with male thread petcock.Screen measures 3-1/2" long. Fits:FLT 1995-2001FXST 1995-2001FLST 1995-2001FXD 1995-2001Additional Information OEM No.62166-81A ...

V-Twin - 35-0563 - Replica Linkert Carburetor Overhaul KitDescriptionReplica linkert carburetor overhaul kit features a cork float. Includes needle and seat, float, bushings, springs, float pin, and gaskets.Threads on this needle and seat assembly is...

V-Twin - 35-0562 - Pre-Formed Fuel Line BlackDescriptionThis kink resistant black fuel line has a 90  pre-formed bend. Line is 20" x 5/16". Fits:All modelsAdditional Information OEM No.29228-80 UOM1 - EA ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-0561 - Pre-Formed Fuel Line ClearDescriptionThis kink resistant clear fuel line has a 90  pre-formed bend. Line is 20" x 5/16". Fits:All modelsAdditional Information UOM1 - EA ManufacturerSifton OriginImported 2025 Catalog Pages394

V-Twin - 35-0553 - Linkert Carburetor Overhaul KitDescriptionReplica Linkert carburetor overhaul kit with 1 1/2" throttle shaft, float bowl nut, and float lever. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL 1936-1940VL 1933-1936Additional Information ...

V-Twin - 35-0552 - Linkert Carburetor Overhaul KitDescriptionKit has a black nitrophyl float and a steel needle.Threads on this needle and seat assembly is 7/16 x 27. *NOTE: For the float arm installation, the center prong of the float...

V-Twin - 35-0551 - Replica Linkert Carburetor Bowl Lock NutDescriptionLinkert carburetor bowl lock nut has a chrome finish. The nuts are 3/4 X 20 thread. Fits:FL 1941-1984Additional Information OEM No.27375-29 UOM1 - EA ManufacturerV-Twin ...

V-Twin - 35-0549 - Petcock Straight Outlet BlackDescriptionBlack Petcock with straight outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information ...

V-Twin - 35-0548 - Retrofit Fuel Line Kit Black for S&S inchE inch and OKO CarDescriptionRetrofit fuel line kit includes a pre-formed 17" x 5/16" black fuel line, needle and seat inlet assembly with 90  swivel fitting, hose clamps and a float bowl...

V-Twin - 35-0547 - Nickel Plated Intake ManifoldDescriptionThree bolt style intake manifold featuring a nickel plated finish as the original "Baby Butt" style. Detailed casting has original number cast in. Manifold is the exact replica of the original...

V-Twin - 35-0546 - Linkert Carburetor Float Bowl with Alloy FinishDescriptionAlloy finish Linkert carburetor float bowl.Float bowl does not have drain screw hole provision. Fits:FL 1941-1965EL 1936-1940Additional Information UOM1 - EA ...

V-Twin - 35-0545A - Linkert Carburetor Needle and Seat KitDescriptionReplica needle and seat set is constructed of a brass seat and a fitted stainless steel needle with a 7/16-24 thread. Fits:FL 1941-1965Additional Information UOM1 - KIT ...

V-Twin - 35-0545 - Linkert Carburetor Needle and Seat KitDescriptionReplica needle and seat set is constructed of a brass seat and a fitted stainless steel needle.Needle kit is fitted with a solid stainless steel needle. Threads on this needle and seat...

V-Twin - 35-0544 - Billet Fuel Filter ChromeDescriptionChrome billet radius style fuel filter includes filter. Fits 5/16" hose. Fits:Custom applicationAdditional Information UOM1 - EA MeasurementsAdditional InformationDiameter: 1-1/4"Overall...

V-Twin - 35-0543 - Sifton Carburetor Idle Speed Knob Description Sifton carburetor idle speed knob features stainless construction with knurls for hand adjustment. Fits: Custom application Additional Information UOM 1 -...

V-Twin - 35-0537 - Linkert Carburetor Float AssemblyDescriptionIncludes black nitryl float viton tip, needle/seat, float arm, and pivot cap set for lever.*NOTE: For the float arm installation, the center prong of the float arm should have .003" of...

V-Twin - 35-0534 - Replica Parkerized Carburetor Choke Rod KitDescriptionReplica Linkert carburetor choke rod kit has a parkerized finish. Kit includes original style bracket, lever, and rod. Fits:FL 1941-1947Additional Information UOM1 - KIT ...

V-Twin - 35-0524 - Linkert Carburetor Idle Plug ScrewDescriptionPlug screw is for Linkert carburetor idle fuel passage, constructed of stainless steel. Fits:FL 1941-1965Additional Information OEM No.27327-24 UOM5 - PK ManufacturerV-Twin ...

V-Twin - 35-0521 - Pingel Inline Fuel Filter ElementDescriptionPingel fuel filter element is a 40 micron element with o-ring. Fits:Custom applicationAdditional Information UOM1 - EA ManufacturerPingel OriginUSA 2025 Catalog Pages1197

V-Twin - 35-0519 - Pingel Inline Fuel Filter ChromeDescriptionPingel Inline fuel filter is machined from billet aluminum with a chrome finish, built to appeal to the true motorcycle enthusiast.Pingel filters are designed to meet the high flow requirement...

V-Twin - 35-0518 - Kleer-Thru Fuel Filter Chrome and GlassDescriptionChrome and glass 5/16" mini fuel filter features nylon filter unit. See thru design makes it easy to observe fuel flow. Fits:Custom applicationAdditional Information UOM1 - EA ...

V-Twin - 35-0517 - Kleer-Thru Fuel Filter Chrome and GlassDescriptionChrome and glass mini fuel filter features nylon filter unit and is 1/4". Fits:Custom applicationAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog...

V-Twin - 35-0516 - Alloy Fuel Filter ChromeDescriptionChrome alloy fuel filter with replaceable sintered brass basket filter. Features outstanding filtration with a high tech look and is 5/16". Fits:Custom applicationAdditional Information UOM1 - EA ...

V-Twin - 35-0514 - Replica Linkert Carburetor Cork FloatDescriptionReplica Linkert carburetor cork float includes shoulder bolt and screw.This cork float manufactured to OEM specifications and helps maintain a proper level of fuel in the carburetors...

V-Twin - 35-0511 - Replica Brass Linkert Carburetor Choke ShaftDescriptionReplica brass Linkert carburetor choke shaft has cam installed. Fits linkert carburetor M-18, M-41, M-42, M-51, M-52, M-54 and M-88.Hole for choke lever screw may have to be...

V-Twin - 35-0507 - Brass Bendix Carburetor FloatDescriptionBrass Bendix carburetor float. Fits:XL 1972-1976FX 1971-1975FL 1971-1975Additional Information OEM No.27630-71 UOM1 - EA ManufacturerZippers OriginUSA 2025 Catalog Pages713

V-Twin - 35-0506 - Replica Zinc Carburetor Choke Rod KitDescriptionReplica Linkert carburetor choke rod kit has a zinc finish. Kit includes original style bracket, lever, and rod. Fits:FL 1948-1965Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-0504 - Carburetor Snap Throttle Conversion KitDescriptionConverts your Linkert carburetor throttle conversion kit to use snap throttle.Bracket is zinc plated. Kit is for use with overhead valve models to use snap throttle. Fits:FL...

V-Twin - 35-0502 - Carburetor Linkert Float Needle and Seat SetDescriptionFloat needle and seat set with the standard Viton-tipped needle for Linkert brass carburetors.Our carburetor needle and seat set is manufactured to meet OEM specification for long...

V-Twin - 35-0501 - Linkert Carburetor Overhaul KitDescriptionLinkert carburetor overhaul kit has a black nitrophyl float and a Viton tipped needle. Kit includes brass shoulder screw and brass nut. Nitrophyl black "M" float.*NOTE: Must order float lever...

V-Twin - 35-0500 - Carburetor Throttle Cable Adapter RingDescriptionChrome carburetor throttle cable adapter ring directs cable on Tillotson carburetor. Fits:Custom application for Tillotson carburetor on Big Twin modelsCustom application for Tillotson...

V-Twin - 35-0497 - Zinc Left Side PetcockDescriptionPetcock has 3/8"-18 National Pipe Thread, is machined from brass and features a zinc plated finish. Fits:EL 1936-1939Additional Information OEM No.3601-36 UOM1 - EA ManufacturerV-Twin OriginImported...

V-Twin - 35-0495 - Linkert Carburetor Throttle Lever with Arm Zicad PlatedDescriptionLinkert carburetor throttle lever with arm is zicad plated.*NOTE: Zicad is a dull shade of zinc similar to cadmium. Lever features two holes for cable block location...

V-Twin - 35-0494 - Bombsight Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle is machined of solid brass for use with 1-1/2""Bombsight" venturi's.This has a longer venturi tube that must be to cut to correct length. Main nozzle...