V-Twin - 35-0201 - Bendix 38mm Carburetor Rebuild KitDescriptionBendix carburetor rebuild kit includes accelerator pump for 38mm stock or adjustable jet carburetor. Fits:XL 1972-1976FX 1971-1975FL 1971-1975Additional Information OEM No.27132-71 UOM1 -...

V-Twin - 35-0198 - Bendix Carburetor Main JetDescriptionBendix carburetor main jet is 1.10" in diameter. Fits:XL 1972-1976FX 1971-1975FL 1971-1975Additional Information OEM No.27654-75 UOM1 - EA ManufacturerZippers OriginUSA TypeBendix 2025 Catalog...

V-Twin - 35-0196 - Keihin Carburetor Rebuild Description Keihin carburetor rebuild contains needle, proper O-rings, and diaphragm. Fits: FL 1984-1984 FXST 1984-1989 XL 1984-1989 FXR 1984-1989 FX 1984-1984 FLST 1986-1989 FLT...

V-Twin - 35-0195 - Fuel Strainer Body Zinc with CapDescriptionFuel strainer filter body only with zinc finish. Comes with cap.Order screen and gaskets separately. Fits:FL 1950-1965Additional Information OEM No.62250-50 UOM1 - EA MeasurementsAdditional...

V-Twin - 35-0194 - Spigot Type 40-44mm Carburetor AdapterDescriptionSpigot rubber carburetor straight adapter for 40-44mm carburetor. Fits:Custom application for a 40-44mm carburetor on Big Twin modelsAdditional Information UOM1 - EA ...

V-Twin - 35-0193 - Brass Intake Manifold Clamp SetDescriptionBrass intake manifold clamp set is two piece type with o-ring type seals. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information UOM1 - SET MeasurementsAdditional InformationOuter...

V-Twin - 35-0192 - Brass Intake Manifold Clamp SetDescriptionBrass intake manifold clamp set is two piece type with flat type seals. Fits:XL 1978-1984FL 1978-1984FX 1978-1984Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-0190 - Linkert 1 inch M-18 Carburetor Parts KitDescriptionLinkert M-18 carburetor kit for 1" linkert brass carburetors with 7/8" venturi.*NOTE: For the float arm installation, the center prong of the float arm should have .003" of clearance,...

V-Twin - 35-0189 - Petcock Adapter FittingDescriptionPetcock adapter plate with fitting for Sportster tanks. Allows the use of EFI fuel tanks on carbureted models or allows the conversion of EFI models to be able to install carburetors.Easily replaces...

V-Twin - 35-0188 - Black Petcock with Right Outlet and NutDescriptionBlack petcock with 90  right outlet and 13/16th nut and includes nylon filter screen, washer, and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside...

V-Twin - 35-0187 - Black Petcock with Nut and 90  Left OutletDescriptionBlack petcock has a 90  left outlet, nut, nylon filter, screen, washer, rubber gasket and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread...

V-Twin - 35-0186 - Black Petcock with Straight Outlet and NutDescriptionBlack petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread...

V-Twin - 35-0183 - Wyatt Gatling 5/16 inch Fuel Hose Lock SetDescriptionWyatt Gatling 5/16" fuel hose lock set is polished stainless steel. These are compression fittings that replace conventional hose clamps, and feature a cleaner appearance and...

V-Twin - 35-0181 - Wyatt Gatling 5/16 inch Fuel Hose Lock SetDescriptionWyatt Gatling 5/16" fuel hose lock set is polished stainless steel. These are compression fittings that replace conventional hose clamps, and feature a cleaner appearance and...

V-Twin - 35-0179 - Shorty Carburetor Thunder Jet Kit BlackDescriptionShorty carburetor Thunder Jet kit increases fuel delivery and includes extra jets for Super "E", Super "B" carburetors. Kit features a black finish.*NOTE: Choke must be deleted for use!...

V-Twin - 35-0170 - Chrome Carburetor Enrichment AssemblyDescriptionChrome carburetor enrichment is 3 position with pike knob. Fits:Replacement application for S&S E and G carburetorAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported ...

V-Twin - 35-0166 - Pingel Chrome Petcock Vacuum Operated Left Side Left SpigotDescriptionPingel vacuum operated chrome petcock with left side spigot. features high fuel flow with the same safety features as the original valve.Features a hex design with...

V-Twin - 35-0161 - Sifton Intake Manifold Flange Kit ZincDescriptionSifton intake manifold flange kit features zinc flanges. Fits:FLT 1986-1999FXD 1991-1999FLST 1986-1999XL 1988-2006FXR 1986-1994FXST 1986-1999Additional Information UOM1 - KIT ...

V-Twin - 35-0160 - Sifton Chrome Petcock Rear FacingDescriptionSifton chrome petcock rear facing with 3/8" outlet with 22mm nut.Petcock features a solid brass construction with on and off and reserve positions and screen. Designs are made for a seated...

V-Twin - 35-0155 - ThunderJet EFI Intake ManifoldDescriptionThunderJet EFI intake manifold for 5.037" long cylinders. is an oversize CNC machined casting that replaces the 44mm factory design used on Delphi equipped models.This system substantially...

V-Twin - 35-0154 - ThunderJet EFI Intake ManifoldDescriptionThunderJet EFI Intake Manifold for 4.975-4.980" long cylinders is an oversize CNC machined casting that replaces the 44mm factory design used on Delphi equipped models.This system substantially...

V-Twin - 35-0152 - Shorty Carburetor Enrichment AssemblyDescriptionShorty carburetor enrichment assembly can be used on S&S shorty carburetors, when an aftermarket air cleaner or velocity stack is used. Features full on or full off operation only.A lever...

V-Twin - 35-0151 - Carburetor Throttle Cable Bracket LongDescriptionLong carburetor throttle cable bracket allow the use of a stock type cable on S&S Super "E" , "G" and OKO carburetors. Fits:Replacement application for S&S Super E, G and OKO...

V-Twin - 35-0150 - Carburetor Throttle Cable Bracket ShortDescriptionShort carburetor throttle cable bracket allow the use of a stock type cable on S&S Super "E" , "G" and OKO carburetors. Fits:Replacement application for S&S Super E, G and OKO...

V-Twin - 35-0144 - Breather Banjo SetDescriptionBreather banjo set without bolts. Fits:XL 1991-UPFLST 1992-2017FXR 1992-1994FXD 1992-2017FXST 1992-2017FLT 1992-UPAdditional Information UOM1 - SET MeasurementsAdditional InformationHole Diameter:...

V-Twin - 35-0135 - Extended Float Bowl KitDescriptionExtended float bowl kit fits CV carburetor for extra capacity. Includes hi-flow inlet fitting. Fits:FLST 1990-2017FLT 1993-2006FXST 1990-2017XL 1988-2006FXD 1993-2017FXR 1990-1994Additional Information...

V-Twin - 35-0134 - High Flow Fuel Inlet BrassDescriptionBrass high flow carburetor fuel inlet replaces broken fuel inlet to the carburetor bowl for modified engines. For all Keihin carburetors.Carburetor side diameter is .311" and the hose side diameter...

V-Twin - 35-0133 - Sifton Carburetor Hop Up KitDescriptionSifton hop-up kit for S&S "E" and OKO carburetors, includes an emulsion tube and a bomb sight annular booster tube. Fits:Special application for S&S E and OKO carburetorsAdditional Information ...

V-Twin - 35-0132 - Carburetor Choke Cable Knob ChromeDescriptionChrome choke knob for S&S Super "E" and "G" carburetor, allows use of the stock plunger and spring. Kit includes brass plunger nut and chrome knob. Fits:Replacement application for S&S Super...

V-Twin - 35-0130 - Adjustable Idle Mixture NeedleDescriptionIdle mixture needle is adjustable for CV carburetor, CV40, and CV 44mm and provides adjustment for Keihin carburetors. Fits:FLST 1990-2017XL 1988-UPFXST 1990-2017FLT 1990-UPFXR 1990-1994FXD...

V-Twin - 35-0129 - Breather Bolt Set ExtendedDescriptionExtended breather bolt set allows mounting of air cleaner to breather bolt stand. Bolts have a 1/2"-13 thread. Fits:XL 1991-UPFLST 1992-2017FXR 1992-1994FXD 1992-2017FXST 1992-2017FLT...

V-Twin - 35-0126 - Breather Bolt SetDescriptionBreather bolt set includes two 1/2-13 x 1-3/4" bolts and two 3/8-16 x 1-3/4" coarse-thread bolts, four thick aluminum washers, four stainless steel washers and one hose clamp. Fits:XL 1991-UPFLST...

V-Twin - 35-0125 - Crankcase Breather and Bracket KitDescriptionCrankcase breather and bracket kit for 1999-up Twin Cam models with CV carburetors or EFI. Includes two 3/8" x 16 threaded breather bolts.Allows the use of CV air cleaners. Order air cleaner...

V-Twin - 35-0124 - Replica Steel Intake ManifoldDescriptionReplica steel intake manifoldThis intake manifold will help improve the performance by improving your air and fuel flow to the carburetor. ...

V-Twin - 35-0123 - Sifton Air Cleaner Breather KitDescriptionSifton air cleaner breather kit features 3/8" inner diameter stainless steel hose attached. Includes breather filter, mounting stud, 24" hose and hardware.Bolt set includes two 1/2 x 13 -1-3/4"...

V-Twin - 35-0122 - Crankcase Breather and Bracket KitDescriptionCrankcase breather and bracket kit for 1993-up models with CV carburetors or EFI. Includes two 3/8" x 16 bolts for Twin Cam models as well as bolts that are 1/2" x 13 for 1993-99 Evolution...

V-Twin - 35-0121 - Crankcase Breather and Bracket KitDescriptionCrankcase breather and bracket kit allows the installation of aftermarket air cleaner assemblies on late model bikes equipped with OEM CV carburetor or Delphi EFI systems.This kit is used on...

V-Twin - 35-0118 - Bendix Carburetor KitDescriptionBendix carburetor kit includes 38mm Bendix carburetor with adjustable main jet, throttle handle with grips, cable and cable bracket, and 7" round logo air cleaner with support. Kit includes seal adapters...

V-Twin - 35-0117 - Intake Manifold Spigot Rubber AdapterDescriptionIntake manifold rubber adapter for Spigot type 42mm size carburetor.*NOTE: Measures 42mm on one side and about 45mm on the other side. Fits:Custom application for a 42mm...

V-Twin - 35-0113 - Carburetor AdapterDescriptionThis carburetor adapter mounts to a four bolt stock Linkert manifold to allow use of a two bolt stock Bendix carburetor. Adapter is constructed of aluminum and has a polished finish.On the 2-hole side the...