Carb & Fuel

V-Twin - 35-1296 - Linkert Side Valve Choke Disc KitDescriptionLinkert Side Valve choke disc kit includes a linkert choke shaft kit, carburetor choke lever and a carburetor choke lever screw. Fits:G 1936-1957U 1936-1948W 1936-1952Additional Information ...

V-Twin - 35-1293 - Overhead Valve Bean Pot Linkert Bowl AssemblyDescriptionOverhead Valve bean pot linkert bowl assembly includes a replica linkert carburetor float lever, nitrophyl linkert carburetor float, linkert carburetor float assembly and a...

V-Twin - 35-1287 - Linkert Side Valve Choke Disc KitDescriptionLinkert Side Valve choke disc kit includes extended lever for applications to clear a 7" round air cleaner, disc, shaft and screws.For use with 1-1/2" brass Linkert carburetors. ...

V-Twin - 35-1286 - OHV Linkert inchBean Pot inch Float Bowl KitDescriptionLinkert float bowl kit has a bowl with a milled flat top is for Overhead Valve models. The bean pot linkert bowl has extra capacity for long wide open throttle sessions. The bowl...

V-Twin - 35-1285 - Linkert Choke Shaft KitDescriptionLinkert choke shaft kit includes choke shaft, choke disc and detent plate and is for 1 1/2 inch linkert carburetors. Fits:EL 1936-1947FL 1941-1947Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1282 - Linkert Choke Shaft KitDescriptionLinkert choke shaft 3 piece kit with carburetor mounted choke lever includes screws, disc, and lever. It is stock for M18, M51, civilian M88, civilian M58, civilian M64. Kit will work on any 1",...

V-Twin - 35-1281 - Linkert Choke Shaft KitDescriptionLinkert choke shaft 3 piece kit includes choke shaft, disc, and detent plate for 1-1/2" carburetors. Fits:FL 1948-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-1280 - inchL inch Series Replica Carburetor AssemblyDescriptionReplica carburetor assembly features original design of the 1960's features a natural bright finish aluminum, as pictured.*NOTE: Accepts S&S 3 bolt pattern air cleaners, air...

V-Twin - 35-1274 - Linkert Main Nozzle Retainer PlugDescriptionLinkert carburetor main nozzle retainers plugs screws directly into Linkert spigot to secure jet.Main nozzle retaining system was developed to remove bowl off and on during competitions...

V-Twin - 35-1268 - XL EFI Intake Manifold Flange SetDescriptionXL EFI intake manifold flange set is zinc plated. Fits:XL 2007-UPAdditional Information UOM1 - SET ManufacturerWyatt Gatling OriginImported

V-Twin - 35-1264 - Linkert Float Bowl Parts KitDescriptionLinkert float bowl parts kit includes a float bowl nut with an internal drain hole, stainless steel nozzle spring, nitrophyl "unsinkable" float and matched needle and seat.For use on other parts...

V-Twin - 35-1259 - Carburetor Fuel InletDescriptionTillotson carburetor fuel inlet. Fits:FL 1966-1971XL 1966-1971Additional Information OEM No.27594-66 UOM1 - EA ManufacturerSifton OriginImported 2025 Catalog Pages716

V-Twin - 35-1258 - Idle Mixture ScrewDescriptionTillotson idle mixture screw features an adjustable knob and features a zinc finish. Fits:FL 1966-1970Additional Information OEM No.27688-66 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog...

V-Twin - 35-1125 - Replica M51 Langhorne Linkert CarburetorDescriptionReplica M51 Langhorne linkert carburetor includes a bean pot float bowl installed, with all internals fully assembled.Features a side vent hole. *NOTE: 90  WR fuel nitrophyl float...

V-Twin - 35-1081 - Side Valve Brass Linkert Bowl AssemblyDescriptionBrass linkert bowl assembly for Side Valve models.Brass float bowl assembly includes all pieces necessary for complete installation. Ready to install, float set to factory dimensions...

V-Twin - 35-1080 - Replica Parkerized Carburetor Choke Rod KitDescriptionReplica Linkert carburetor choke rod kit has a parkerized finish. Kit includes original style bracket, lever, and rod. Fits:EL 1938-1947Additional Information UOM1 - KIT ...

V-Twin - 35-1074 - Overhead Valve Brass Linkert Bowl AssemblyDescriptionBrass linkert bowl assembly for Overhead Valve models.Brass float bowl assembly includes all pieces necessary for complete installation. Ready to install, float set to factory...

V-Twin - 35-1069 - Side Valve Float Bowl KitDescriptionSide Valve float bowl kit includes a brass WR fuel line fitting and bean pot style bowl with the float assembly. Fits:U 1941-1948W 1937-1952Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1068 - CV Carburetor Mixture ScrewDescriptionCV carburetor mixture screw with spring is for all 40mm CV carburetors. Fits:FX 1993-2006XL 1988-2006Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages390

V-Twin - 35-1067 - inchL inch Carburetor Air Bleed ScrewDescriptionAir bleed screw for "L" carburetors. Fits:Replacement application for "L" series carburetorsAdditional Information UOM5 - PK ManufacturerSifton OriginImported 2025 Catalog...

V-Twin - 35-1066 - M74 Linkert Carburetor Main NozzleDescriptionM74 Linkert carburetor main nozzle is an OE replica that mesures 2" long. Fits:EL 1937-1952UL 1937-1948FL 1941-1965ULH 1938-1941U 1937-1948FLH 1955-1965Additional Information OEM No...

V-Twin - 35-1065 - 74B Linkert Choke ShaftDescription74B Linkert choke shaft can be used on M-36, M-45, M-45A, M-61, M-74 and M-74B models.*NOTE: Requires detent plate for choke operation, V-Twin #35-1001, available separately. Fits:EL 1948-1952FL...

V-Twin - 35-1063 - Linkert DC Carburetor KitDescriptionLinkert DC carburetor kit.Includes bowl screws, bowl gasket, body gasket, bowl nut gasket, intake manifold gasket, drain screw, throttle shaft, throttle shaft screws, throttle shaft spring, needle...

V-Twin - 35-1050 - Black S&S E CarburetorDescriptionS&S E carburetor only without air cleaner and manifold. Fits:FXST 1984-1999FLST 1986-1999XL 1986-2006Additional Information UOM1 - EA ManufacturerS&S Cycle OriginUSA 2025 Catalog Pages395

V-Twin - 35-1049 - OKO Performance 1-7/8 inch Shorty Carburetor BlackDescriptionOKO performance shorty carburetor is painted black and accepts S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle...

V-Twin - 35-1030 - 40mm CV Carburetor NaturalDescriptionNatural finish 40mm CV carburetor is for 1340 models and is an accurate reproduction of the venerable Keihin CV carburetor.Includes a 1.9 main jet and a .046 slow jet installed. *NOTE: Must order...

V-Twin - 35-1025 - 47mm OKO Shorty Carburetor Kit AlloyDescriptionAlloy kit includes a natural 47mm shorty OKO carburetor, push-pull cable type, one piece manifold, with mount flanges and a round mesh air cleaner.Carburetor is OKO brand,...

V-Twin - 35-1021 - Side Valve Linkert Carburetor Bean Pot Style Float Bowl KitDescriptionLinkert carburetor float bowl with early style hex cap features a natural aluminum finish and is the bean pot style with additional capacity. For Flathead models...

V-Twin - 35-1018 - EFI Fuel LineDescriptionEFI fuel line replaces the fuel line from the tank to the fuel rail. Fits:FLT 2012-2016Additional Information OEM No.61208-10 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-1015 - Overhead Valve Linkert Carburetor Float Bowl BrassDescriptionOverhead valve linkert carburetor float bowl features a brass construction, with a flat top and provision for drain screw hole.Includes linkert carburetor float pivot pin...

V-Twin - 35-1009 - Linkert-CV 3 Bolt Carburetor AdapterDescriptionLinkert-CV carburetor adapter is machined from aluminum and adapts CV carburetors to 3 bolt linkert manifolds on Side Valve Harley's and Indians.Includes the following; 27397-27,...

V-Twin - 35-1007 - SV Replica Linkert Carburetor Float Bowl BrassDescriptionReplica linkert carburetor float bowl features a brass construction for Side Valve models.Inlcudes 9/16 x 20 hex plug, with washer for bowl extension. Float bowl does have drain...

V-Twin - 35-1006 - Shorty E Carburetor Jet KitDescriptionShorty E carburetor jet kit for OKO and S&S carburetors, B, E, and G series 47mm or 1-7/8".Low range kit contains one of each of the following intermediate jets: (.0265, .028, .0295) and one each...

V-Twin - 35-1005 - Keihin Jet Kit 40 PiecesDescription40 piece Keihin jet kit includes 30 main jets and 10 slow jets. Features sizes ranging from #32 to #110. Fits:ReplacementAdditional Information UOM1 - KIT ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-1004 - Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle. Fits:DLX 1924-1940Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-1002 - Linkert Carburetor Main NozzleDescriptionLinkert carburetor main nozzle. Fits:Chief 1942-1948Additional Information OEM No.601002 UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-1001 - Carburetor Air Intake Shaft StopDescription2023 New Production linkert carburetor air intake shaft stop.*NOTE: Flat on one side. Fits:FL 1941-1965Additional Information OEM No.27219-36 UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1000 - Linkert Needle Valve Lever Kit BrassDescription2023 New Production brass linkert needle valve lever kit includes the shoulder bolt, spring, spring seat collar and arm.This is a 4 piece kit. *NOTE: Needle not included. Fits:FL...

V-Twin - 35-0998 - inchL inch Series Throttle Arm KitDescriptionThrottle arm kit is for use on "L" series carburetors with single or dual cable application. Must be spring activated for operation. Kit includes shaft, door, dual hole arm and screws.*NOTE:...

V-Twin - 35-0997 - Indian Linkert Needle and Seat Kit Description Features a matched needle and seat assembly for Linkert carburetors on Indian model.The tip is metal. The gas line fitting end is 1/8" NPT. For use in Indian linkert carburetors only. ...