Carb & Fuel

V-Twin - 35-0924 - Super inchE inch Needle Seat with ElbowDescriptionSuper "E" needle seat with elbow. Does not include needle.*NOTE: Must order needle separately. Fits:Special application for S&S "E" series carburetorsAdditional Information ...

V-Twin - 35-0918 - Linkert Carburetor Float Pin Cap SetDescriptionLinkert carburetor float pin cap set. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL 1936-1940VL 1933-1934Additional Information OEM No.27383-11B UOM1 - SET ManufacturerV-Twin ...

V-Twin - 35-0899 - Linkert Needle and SeatDescriptionLinkert needle and seat includes a brass seat and stainless steel needle.The thread on the needle and seat body measures 7/16"-24. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin...

V-Twin - 35-0897 - Linkert Needle, Seat and Brass Strainer SetDescriptionBrass gas strainer with screen, needle and seat.The seat fitting is included. *NOTE: Thread on needle seat is 1/8" NPT. Must order filter screen separately. Fits:FL 1941-1965W...

V-Twin - 35-0893 - XL 47mm OKO Shorty Carburetor Kit AlloyDescriptionKit includes an alloy 47mm shorty OKO carburetor, push-pull cable type, one piece manifold, with mount flanges and a round mesh air cleaner.Kit fits EFI models. Additional jets are...

V-Twin - 35-0889 - XL Intake Flange KitDescriptionXL intake flange kit includes two zinc plated intake flanges, two intake manifold seals and four allen screws, for EFI 2007-up XL applications. Fits:XL 2007-UPAdditional Information UOM1 - KIT ...

V-Twin - 35-0887 - Linkert to CV Carburetor AdapterDescriptionThis carburetor adapter is machined from billet stock with a natural finish. Allows the installation of the 40mm CV carburetor 4 bolt linkert to Big Twin manifold.For use with 40mm CV...

V-Twin - 35-0886 - Fuel Strainer Filter NickelDescriptionFuel strainer features a nickel finish over a machined red brass.Nickel fuel strainer is specifically for 1936-1937 M-5 linkert carburetors. Screen and gaskets not included. Must order filter...

V-Twin - 35-0885 - Linkert Carburetor SpacerDescriptionThis insulator spacer is for a 3-bolt, 1-3/8" throat diameter Linkert carburetor to manifold. No gasket is required with the use of this spacer.This spacer is a plastic replica of the original...

V-Twin - 35-0884 - Linkert Carburetor VenturiDescriptionThis Venturi will downsize the 4-bolt M-74 1-1/2" brass Linkert carburetor so that it can be used on a flathead model that originally had a 1-1/4" carburetor.This Venturi will allow the atmospheric...

V-Twin - 35-0879 - Copper Fuel Strainer without ScreenDescriptionFuel strainer is machined from copper that features a natural finish.The inlet and outlet fittings are 7/16" x 20 TPI. The nut is features a 7/16"-24 thread SAE. *NOTE: Must order filter...

V-Twin - 35-0873 - Linkert Carburetor Overhaul KitDescription18pc Linkert carburetor overhaul kit for 3-bolt linkerts with 1-1/4" throat. Kit includes black float, bushings, springs, float pin, stainless steel needle, brass seat and a 3-bolt insulator...

V-Twin - 35-0872 - Cadmium Choke Lever AssemblyDescriptionCadmium choke lever assembly includes mount stud and thumb lever. Fits:EL 1936-1937Additional Information UOM1 - EA ManufacturerSifton OriginImported 2025 Catalog Pages711

V-Twin - 35-0867 - Oversize Carburetor Throttle DiscDescriptionLinkert 1-1/2" carburetor throttle disc is standard size with correct bevel and #9-x marking.Throttle disc is not perfectly round, it has more of a slight oval shape. Fits:FL...

V-Twin - 35-0863 - Intake Manifold Nut and Seal KitDescriptionParkerized intake manifold nuts with brass seals.Note: For use with a 3-bolt 61" manifold on large port knuckleheads. ...

V-Twin - 35-0861 - Oversize Carburetor #12 Throttle DiscDescriptionLinkert 1-1/2" carburetor throttle disc is .025" oversize with correct bevel. Fits:FL 1940-1950FL 1952 61" OHVAdditional Information OEM No.27280-40A UOM1 - EA ManufacturerV-Twin ...

V-Twin - 35-0860 - Oversize Carburetor Throttle Disc for 1-1/4 CarburetorDescriptionCarburetor throttle disc is .025 oversize. Used for 1-1/4" carburetor that requires an oversized throttle disc due to wear. Fits:WL 1929-1952Additional Information OEM...

V-Twin - 35-0853 - Linkert Carburetor Bowl Zinc Lock NutDescriptionLinkert carburetor bowl lock nut has a zinc finish. 4-piece kit includes large nut with stud, lock washer lock nut, and copper filled seal washer. The nuts are 3/4 X 20 thread. Fits:FL...

V-Twin - 35-0852 - Keihin Carburetor Heavy Duty Diaphragm PumpDescriptionHeavy duty Keihin carburetor diaphragm pump.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FL 1985-1989FX 1976-1984FXR 1982-1989Additional Information OEM No...

V-Twin - 35-0851 - Linkert Carburetor Bombsight Venturi With ToolDescriptionBombsight Venturi fits 1-1/2" M74 brass Linkert carburetors and is the performance dual venturi used on WR, MR-3, MR-4, KR and KH models. Has a 1-/32" inner tube suspended in the...

V-Twin - 35-0850 - Carburetor Body Rebuild KitDescriptionReplacement carburetor body rebuild kit for S&S Super "E" and OKO carburetors, includes accelerator pump boot, o-ring, gaskets, throttle shaft, throttle door and throttle shaft return springs.This...

V-Twin - 35-0848 - 38mm OKO Flatslide CarburetorDescriptionSpigot mount OKO carburetor features built in choke activator.Carburetor is OKO brand. Must order the air cleaner adapter, which will allow the choice of CV air cleaners, separately. Fits:XL...

V-Twin - 35-0845 - Linkert DC Needle and Seat SetDescriptionLinkert needle and seat set features a brass machined body, the needle is stainless steel and includes the gas vent. For the late die cast aluminum linkerts.Accepts a 5/16" inner diameter rubber...

V-Twin - 35-0844 - Replica Zinc Plated Intake ManifoldDescriptionReplica zinc plated intake manifold features a longer lip for attaching o-ring and flat seals, with stainless steel V-Twin clamp with shoe.This intake manifold will help improve the...

V-Twin - 35-0843 - XL CV Carburetor Bracket with BreatherDescription2020 New Production XL CV carburetor bracket with breather, mounts CV carburetors to fuel injected models and allows mounting of CV air cleaners. Features a natural alloy finish.For S&S...

V-Twin - 35-0841 - 34mm Spigot Mount CarburetorDescription34mm spigot mount carburetor.Carburetor is OKO brand. Must order air cleaner adapter, which will allow the choice of CV air cleaners, separately. Fits:WL 1936-1952Additional Information UOM1 - EA...

V-Twin - 35-0833 - Linkert Carburetor Needle and Seat KitDescriptionReplica needle and seat set is constructed of a brass seat and a fitted extended viton tip needle.Threads on this needle and seat assembly is 7/16 x 27. Includes gasket. *NOTE: Needle...

V-Twin - 35-0829 - Oversize Linkert Carburetor Throttle DiscDescriptionLinkert carburetor throttle disc is .020 oversize and is for a 1-1/2" carburetor. Fits:FL 1941-1965Additional Information UOM1 - EA MeasurementsAdditional InformationOuter Diameter:...

V-Twin - 35-0828 - Oversize Linkert Carburetor Throttle DiscDescriptionLinkert carburetor throttle disc is .010 oversize and is for a 1-1/2" carburetor. Fits:FL 1951-1965Additional Information UOM1 - EA MeasurementsAdditional InformationOuter Diameter:...

V-Twin - 35-0827 - Oversize Linkert Carburetor Throttle DiscDescriptionLinkert carburetor throttle disc is .005 oversize and is for a 1-1/2" carburetor. Fits:FL 1951-1965Additional Information UOM1 - EA MeasurementsAdditional InformationOuter Diameter:...

V-Twin - 35-0822 - Linkert Carburetor Needle and Seat KitDescriptionReplica needle and seat set is constructed of a brass seat and a fitted solid stainless steel needle.Needle kit is fitted with a solid stainless steel needle.Threads on this needle and...

V-Twin - 35-0821 - Mikuni Carburetor Rebuild KitDescriptionCarburetor rebuild kit for Mikuni carburetor includes flow fuel hose, throttle valve seal, float bowl seal o-ring, and carburetor top gasket. Fits:Custom application for HSR-42/HSR-45...

V-Twin - 35-0819 - Mikuni HSR-45 Carburetor Jet NeedleDescriptionMikuni HSR-45 carburetor jet needle, 96. Fits:Replacement application for Mikuni HRS-42 carburetorAdditional Information UOM1 - EA ManufacturerSudco OriginImported TypeMikuni 2025...

V-Twin - 35-0801 - Mikuni Carburetor Pilot JetDescriptionMikuni carburetor pilot jet is 25.0. Fits:Replacement application for Mikuni HRS-42 carburetorAdditional Information UOM1 - EA ManufacturerSudco OriginImported TypeMikuni 2025 Catalog Pages398...

V-Twin - 35-0799 - Zicad Plated 45 inch Intake Manifold KitDescriptionFlathead zicad plated intake manifold kit has brass packing rings and parkerized nuts.*NOTE:: Zicad is a dull shade of zinc similar to cadmium. Fits:G 1937-1973W 1937-1952Additional...

V-Twin - 35-0795 - Brass Linkert Carburetor Throttle LeverDescriptionLinkert carburetor throttle lever features a natural brass finish.Lever features one hole for cable block location. Fits:UL 1937-1948WL 1937-1952G 1936-1956Additional Information OEM...

V-Twin - 35-0791 - Breather Bolt Set ChromeDescriptionChrome breather bolt set. Bolt has a 1/2 X 13 thread and are 1-3/4" long.Bolt location, center to center, on Big Twin models is 15cm. Fits:FXD 1992-1998FLST 1992-1998FXST 1992-1999XL 1991-UPFXR...

V-Twin - 35-0790 - Linkert Carburetor Overhaul KitDescriptionLinkert carburetor kit includes foam float, bushings, springs, float pin and gaskets. Float is molded with nitrophyl material which is fuel resistant. Fits:WL 1933-1952UL 1937-1948FL...

V-Twin - 35-0788 - inchL inch Series Dual Carburetor Bowl KitDescriptionL" series dual carburetor bowl kit inlcudes a mount plate and 2 complete bowl assemblies with the float, needle and seat.Reproduction of the original "L" series bowls! Requires 1/4 x...

V-Twin - 35-0787 - Intake Manifold Flange Set BilletDescriptionBillet intake manifold flange set for use when installing larger throttle bodies for EFI. Fits:FLST 2007-2017FXD 2007-2017FXST 2007-2017Additional Information UOM1 - KIT ManufacturerSifton ...