Carb & Fuel

V-Twin - 35-1830 - OKO 47mm Shorty Carburetor KitDescriptionPerformance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses...

V-Twin - 35-1821 - Brass Bombsight M74 Carburetor Hardware KitDescriptionBrass bombsight M74 1-1/2" throat carburetor hardware kit includes a nitrophyl "unsinkable" float. Fits:FL 1948-1965Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1820 - Side Valve Snap Throttle ArmDescriptionSide Valve snap throttle arm is stainless steel. Fits:UL 1937-1948G 1937-1956W 1937-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1819 - Needle and Seat for Linkert CarburetorDescriptionLinkert carburetor needle and seat. Fits:K 1952-1956Additional Information OEM No.27382-52 UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1816 - M-3 Linkert Carburetor Idle Bleed PlugDescriptionM-3 Linkert carburetor idle bleed plug. Fits:K 1952-1956Additional Information UOM1 - EA ManufacturerV-Twin OriginUSA

V-Twin - 35-1812 - Linkert Carburetor Throttle DiscDescriptionLinkert carburetor throttle #8 throttle disc, .020 oversize. Fits:K 1952-1956Additional Information OEM No.27280-52OS UOM1 - EA ManufacturerV-Twin OriginUSA 2025 Catalog Pages710

V-Twin - 35-1807 - Schebler Carburetor Gasket KitDescriptionSchebler gasket kit is for all Schebler pot metal DLX carburetors with tin top bowl, bean pot bowl or using Linkert bowl. Fits:All Shebler Pot Metal DLX Carbs with Tin Bowl, Bean Pot...

V-Twin - 35-1806 - Schebler Carburetor Rebuild KitDescriptionSchebler rebuild kit is for all 1-1/4" Schebler pot metal DLX carburetors with bean pot bowl. Must run 7/16 x 20 tap in seat threads. Fits:All 1-1/4" Schebler Pot Metal DLX carburetors...

V-Twin - 35-1805 - Schebler Carburetor Rebuild KitDescriptionSchebler rebuild kit is for all 1-1/4" Schebler brass DLX carburetors with brass bowl. Fits:All 1-1/4" Schebler Brass Bowl DLX carburetorsAdditional Information UOM1 - KIT ...

V-Twin - 35-1804 - Schebler Carburetor Rebuild KitDescriptionSchebler rebuild kit is for all 1" Schebler brass DLX carburetors with brass bowl. Fits:All 1" Schebler Brass Bowl DLX carburetorsAdditional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1803 - Schebler Carburetor Rebuild KitDescriptionSchebler rebuild kit is for all 1-1/4" Schebler pot metal DLX carburetors with short nose tin top bowl. Fits:All 1-1/4" Schebler Pot Metal DLX carburetors with short noseAdditional...

V-Twin - 35-1802 - Schebler Carburetor Rebuild KitDescriptionSchebler rebuild kit is for all 1" Schebler pot metal DLX carburetors with long nose tin top bowl. Fits:All 1" Schebler Pot Metal DLX carburetors with long nose tin topAdditional...

V-Twin - 35-1801 - Schebler Carburetor Rebuild KitDescriptionSchebler rebuild kit is for all 1" Schebler pot metal DLX carburetors with short nose tin top bowl. Fits:All 1" Schebler Pot Metal DLX carburetors with short nose topAdditional Information...

V-Twin - 35-1795 - Linkert M-74 Carburetor AssemblyDescriptionLinkert M-74 carburetor assembly includes a black carburetor body with cadmium components. Fits:FL 1941-1965Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

V-Twin - 35-1790 - WR Manifold KitDescriptionWR manifold kit includes manifold, brass seals, adapter inserts and hex nuts. Fits:WR 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement Items35-0286 - WR Linkert...

V-Twin - 35-1789 - EFI Throttle ShaftDescriptionEFI throttle shaft. Fits:FLT 2001-UPAdditional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1783 - Linkert Carburetor #13 Throttle DiscDescriptionLinkert 1-1/2" carburetor throttle disc is standard size with #13 markings and the correct bevel. Throttle disc is for M74 Linkert carburetors. Fits:FL 1941-1965Additional Information ...

V-Twin - 35-1781 - 47mm OKO Shorty Carburetor Kit AlloyDescriptionPerformance 47mm shorty carburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response...

V-Twin - 35-1780 - OKO 47mm Shorty Carburetor KitDescriptionPerformance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses...

V-Twin - 35-1773 - SV Linkert Carburetor Float BowlDescriptionReplica sv stock float bowl is with a cast finish and without drain hole. Fits:U 1937-1948W 1937-1952G 1937-1954Additional Information UOM1 - EA ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-1772 - Overhead Valve Bean Pot Linkert BowlDescriptionOverhead Valve bean pot linkert bowl is made from aluminum and features a drain hole. Fits:FL 1941-1965EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin OriginImported ...

V-Twin - 35-1771 - SV Linkert Carburetor Float BowlDescriptionLinkert Carburetor float bare bowl is cast finish. Includes brass drain plug. Accepts brass cap.*NOTE: Brass cap NOT included. Fits:U 1937-1948W 1937-1952G 1937-1954Additional Information ...

V-Twin - 35-1765 - Replica M74 Linkert Carburetor CadmiumDescriptionReplica linkert M-74 carburetor is fully assembled with a cadmium body. All parts included as shown.1-1/2" carburetor assembly includes the top throttle arm assembly installed and with a...

V-Twin - 35-1751 - 40mm CV Carburetor KitDescription40mm CV carburetor kit includes a replica 40mm CV carburetor, manifold adapter, intake clamps, a late flat intake manifold seal and an adapter ring kit.Throttle is operated by single pull cable...

V-Twin - 35-1746 - Keihin Carburetor Jet ReplacementDescriptionKeihin carburetor jet replacement. Fits:XL 1976-1987FXST 1986-1992FL 1976-1980FLST 1986-1992Additional Information UOM1 - EA ManufacturerV-Twin OriginImported TypeKeihin

V-Twin - 35-1745 - Keihin Carburetor Air NeddleDescriptionKeihin carburetor air neddle. Fits:XL 1976-1987FXST 1986-1992FL 1976-1980FLST 1986-1992Additional Information UOM1 - EA ManufacturerV-Twin OriginImported

V-Twin - 35-1744 - Fuel Strainer Line FittingDescriptionFuel strainer line fitting to connect rubber fuel line to fuel strainer assembly.End is barbed to secure hose. A 1/2"-24 thread clamp is still needed at connection. Fits:FL 1950-1965Additional...

V-Twin - 35-1743 - CV Carburetor Adapter KitDescriptionCV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

V-Twin - 35-1738 - Replica Keihin Carburetor AssemblyDescriptionReplica butterfly type Keihin carburetor accepts all replacement OEM components. Complete carburetor assembly includes updated needle and jet with fuel passages.Keihin carburetor is single...

V-Twin - 35-1726 - Linkert M-74 Carburetor Hardware KitDescriptionLinkert M-74 1-1/2" throat carburetor hardware kit includes a nitrophyl "unsinkable" float and bean pot bowl. Fits:FL 1948-1965Additional Information UOM1 - KIT ManufacturerV-Twin ...

V-Twin - 35-1711 - Linkert Snap Throttle Shaft Return SpringDescriptionLinkert snap throttle return spring.For use in linkert snap throttle. Fits:FL 1941-1965Additional Information UOM1 - EA ManufacturerV-Twin OriginImported Tech NoteSuggested to use...

V-Twin - 35-1708 - OKO 38mm WL and L Carburetor KitDescriptionFor 45 WL and G models. Kit includes a 38mm flat side TC carburetor with a choke mechanism, cable, 3 bolt flange adapter and a twist grip set.Carburetor is OKO brand. Must order the cast iron...

V-Twin - 35-1702 - inchL inch Series Choke Shaft Lever AssemblyDescriptionL" Series choke shaft lever assembly for S & S "L" Series carburetors with 1-7/8" bore. Fits:Replacement application for S&S "L" series carburetorAdditional Information ...

V-Twin - 35-1698 - inchR inch Linkert Fuel FittingDescriptionR" Linkert fuel fitting with short nut is machined of brass and accepts a 3/8" hose for threading on all Linkert needle seat fittings on Harley models Fits:FL 1941-1965EL 1936-1952W...

V-Twin - 35-1681 - OKO Performance 1-7/8 inch Shorty Carburetor KitDescriptionKit includes a chrome billet carburetor bracket kit, which features an integral breather passage to air intake, and a 1-7/8" alloy finish OKO performance shorty carburetor...

V-Twin - 35-1680 - CV XL Carburetor Manifold NaturalDescriptionCV XL carburetor manifold, for converting EFI models to CV carburetor units, features a natural finish.Re-use manifold flanges. *NOTE: Module ignition recalibration necessary. ...

V-Twin - 35-1679 - Linkert M5 Carburetor Rebuild KitDescriptionReplica Linkert M5 carburetor rebuild kit. Fits:EL 1936-1939Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported

V-Twin - 35-1676 - 1/2 inch Breather Bolt SetDescriptionZinc 1/2" breather bolt set for breather brackets.Sold in a quantity of 2. Fits:XL 1991-UPAdditional Information UOM1 - SET ManufacturerV-Twin OriginImported Tech NoteSuggested to use with...

V-Twin - 35-1668 - 40mm CV Carburetor KitDescription40mm CV carburetor kit includes a 40mm CV carburetor, manifold, manifold flange kit and support bracket with the integral breather.The manifold does not have provisions for map sensor or other pollution...

V-Twin - 35-1667 - Linkert Needle and Seat KitDescriptionLinkert needle and seat includes 90  fitting to accepts hose. Fits:UL 1941-1965FL 1941-1965EL 1941-1965W 1941-1952Additional Information UOM1 - KIT ManufacturerV-Twin OriginImported Replacement...