Clutch, Driveline & Trans.

Barnett - Scorpion Billet Clutch Plate Kit for '17-Up Harley Touring Consists of 10 aramid fiber friction plates, nine steel plates and a set of three heavy-duty springs Made in the U.S.A. Fitment: Harley-Davidson 2017-2019 FLHT, FLHR, FLHX,...

Covington's Customs Finned Inspection Covers - fits '99-'06 Touring Models These Finned Inspection Cover are CNC-machined from billet aluminum and are available in Gloss Black or Chrome. Features: FINNED INSPECTION COVERS CNC-machined from billet...

Drag Specialties Rear Wheel Sprockets Convert your rear drive belt to a 530 chain with the Rear Wheel Sprockets by Drag Specialties. Available in 46, 48 and 49-tooth. Features: Convert rear drive belt to 530 chain Steel with a gloss black...

The James Gaskets Gasket Kit,Inspection-Derby Cover: State of the art material Made in the USA Fitment: '99-'06 Touring Models

James Gasket - 5th Gear Clutch Side Mainshaft Seal fits '80-'E84 Big Twin 5-Speed Models (OEM #12044, 12044A) Features: Made in the U.S.A. Fitment 1984 Harley-Davidson Low Glide FXRS - Notes: 1984Fits to Early '84...

James Gasket - Transmission to Engine Seal fits '07-'16 FLHT, '06-'17 Dyna Models (OEM #35607-06) Features: Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Low Rider S FXDLS - - 2015-2016 Harley-Davidson Electra Glide...

James Gasket - Engine Inner Primary Seal fits '17-'23 M-Eight Models (OEM #256004-55, 257004-55) Features: Made in the U.S.A. Fitment 2020 Harley-Davidson Road Glide Limited FLTRK - - 2020 Harley-Davidson Softail Low Rider S...

James Gasket - Primary Cover Gasket fits '17-'23 Touring Models (OEM #257003-78) Features: Replacement Engine Gasket Fitment 2020, 2022 Harley-Davidson Road Glide Limited...

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models (Gaskets, Seals and O-Rings) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the USA Note: Seals not...

James Gasket - Primary Gasket fits '05-'06 Touring Models w/ Foamet® Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone...

James Gasket - Primary Cover Gasket fits '99-'06 FLT Model (OEM #34901-94) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Gasket Kit fits '84-'86 Touring & '84-'88 Softail Models w/ Silicone Bead Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Transmission Gasket/Seal Kit fits '93-'98 FLT/​FLHT Models (OEM #33031-93) Features: Made in the U.S.A. Fitment 1993-1998 Harley-Davidson Electra Glide Classic FLHTC - - 1993-1997 Harley-Davidson Electra Glide...

James Gasket - Transmission Seal Kit fits '94-'98 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Made in the U.S.A. Fitment 1998 Harley-Davidson Road Glide FLTR - - 1998 Harley-Davidson Road...

James Gasket - Transmission Seal Kit fits '84-'93 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Made in the U.S.A. Fitment 1993 Harley-Davidson Wide Glide FXDWG - - 1993 Harley-Davidson Low...

Jims - 1733 Mega Nut fits '07-'20 Big Twin & '06-'17 Dyna Models Features: Includes machined clamping face tolerance, along with additional locking holes for a more precise and secure way to secure pulley nut Made in the U.S.A...

Jims - 981 Cruise Drive/6-Speed Main Drive Gear Tool fits '07-'17 Twin Cam & '06 Dyna Models Features: Holds the main drive gear square to its bearing bore, eliminating any marring of gear or bearings Installs the main drive gear without...

Jims - 986 Cruise Drive/6-Speed Main Drive Gear Bearing/Seal Installer Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a...

Jims - 984 Transmission Door Puller fits '07-'17 Big Twin & '06 Dyna Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings...

Jims - 989 Main Drive Gear Sprocket Locknut Wrench fits '07-'21 Big Twin & '06 Dyna Models Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the USA Inner...

Jims - 901 Cruise Drive/6-Speed Main Drive Gear Remover Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Removes the main drive gear from the main bearing correctly while in the transmission case Eliminates the need of an arbor press and...

Jims - 911 Cruise Drive/6-Speed Trap Door Bearing Remover/Installer fits '07-'20 Big Twin & '06 Dyna Models Features: Accurately installs and removes lubed ball bearing into transmission trap door No arbor press needed Made in the U.S.A...

Jims - 767 6-Speed Transmission Case Shifter Shaft Seal Installer fits '06-'20 Big Twin & '84-'05 Sportster Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and installs shifter seal to correct...

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features: Makes installing shifter shaft seal precise and effortless Aligns, centers and...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 967-4 Installation/Removal Inner Primary Bearing Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also...

Jims - 967-5 Inner Primary Bearing Tool fits '07-'19 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also removes and installs...

Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/​FLST & '85-'06 Touring & Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer...

Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/​FLHT/​FXR, '84-'99 Big Twins & '84-'00 FLHT/​FXR/​FXD Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use...

Jims - 38515-90 Clutch Spring Compressor fits '90-'97 Big Twin & '91-'03 Sportster Models Features: For '91-'03 XL applications, compressor nut must be used in conjunction with compressor tool Used to release clutch spring so retainer ring can...

Jims - 1710 Outer Race Snap Ring fits '69-'02 Big Twin Models Features: Used for removing and installing the Timken® bearing outer race snap ring A must for replacing rings in OEM and aftermarket cases Made in the U.S.A...

Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut Made in the U.S.A...

Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...

Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings. Fitment 2006 Harley-Davidson Street...

Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case Can be used without removing transmission from the bike Made in the U.S.A...

Jims - 2256 Drive Gear Seal Installation fits All 5-Speed Big Twin Models Features: Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be used to protect main drive...

Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models Features: Designed to press oil seal over sprocket shaft into case Made in the U.S.A. Fitment 2010 Harley-Davidson Street Glide Trike...