Harley Davidson

Biltwell - Murdock Pullback Risers The Biltwell Murdock pullback risers are available in 6, 8, 10, and 12 inch heights and have a 2" back sweep. These risers not only look rad but they're durable. Made from cast steel, this one piece top clamp is TIG...

These pegs were returned and do you alot of scratches on the base/ see photos. The Deadbeat Customs "Moto" Footpegs are designed for aggressive riding, if you're looking to stay locked-in to your Harley Davidson you found the right footpegs. Deadbeat...

Jims - Clutch Spring Compressor fits '90-'97 Big Twin & '91-'03 Sportster Models Features: For '91-'03 XL applications, compressor nut must be used in conjunction with compressor tool Used to release clutch spring so retainer ring can be easily...

Jims - Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Softail...

Jims - Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...

Jims - Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings. Fitment 2006 Harley-Davidson Street Glide...

Jims - Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 2002 Harley-Davidson Softail Fat Boy EFI...

Jims - Swingarm Bushing Tool fits '80-'01 FLT/​FLHT, '82-'99 FXR & all Aftermarket FXR-Style Frames Features: Allows installation of delicate, silicone cleveblock bushings in swingarm without damage Tool presses on outer sleeve of bushing Can...

Jims - Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the USA Inner...

Jims - Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal Made in the U.S.A. Fitment 1989 Harley-Davidson Tour...

All open box items are non-returnable and final sale due to their discounted nature. This item has been previously returned, item is new, however could be missing the original packaging or the packaging has been opened. Tags, manuals, or installation...

All open box items are non-returnable and final sale due to their discounted nature. This item has been previously returned, item is new, however could be missing the original packaging or the packaging has been opened. Tags, manuals, or installation...

All open box items are non-returnable and final sale due to their discounted nature. This item has been previously returned, item is new, however could be missing the original packaging or the packaging has been opened. Tags, manuals, or installation...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter With Nut fits '86-'22 Sportster (Except RH Sportster), 09-12 XR1200/X Models (OEM #63806-83, 63796-77A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed...

Drag Specialties - Paper Oil Filter with Spring fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #63835-87T, 63837-92T, 6383940-53) Features: High-quality drop-in oil filter Fitment 1982 Harley-Davidson Super Glide II...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter fits '86-'22 Sportster (Except RH Sportster), '09-'12 XR1200/X Models (OEM #63806-83, 63796-77A, 63805-80A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are...

Drag Specialties - Oil Filter fits '86-'22 Sportster (Except RH Sportster), '09-'12 XR1200/X Models (OEM #63806-83, 63796-77A, 63805-80A) Features: High-quality spin-on filters are a dependable...

V-Twin - Chrome Triple Tree Set fits '88-'94 FXR, '88-'03 Sportster Models Chrome triple tree set includes upper and lower trees with removable threaded stem. Accepts 39mm fork tubes. Set does not include 1" bearings, top nut and dust covers, must...

Motorshop - Alternator Rotor Puller Tool fits '91-'06 FXD, '84-'94 FXR, '86-'06 FLST Models Alternator rotor puller tool Fitment: FL 1971-1984 FLST 1986-2006 FXST 1984-2006 FX 1971-1984 FXD 1991-2006 FXR 1984-1994 FLT 1979-1996

S&S Cycle - HI-4N Ignition Module Kit fits '70-'99 Big Twin Models Features: Updated version of the popular Crane HI-4 ignition More power than the stock ignition Single-fire and dual-fire function built into a single module All-metal housing...

S&S Cycle - Billet Oil Pump Kit fits '92-'99 Evolution Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and...

S&S Cycle - Billet Oil Pump fits '70-'91 Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check...

S&S Cycle - Replacement Billet Oil Pump Gasket Kit Features: Made in the U.S.A. Fitment 1999 Harley-Davidson Super Glide Sport FXDX - - 1999 Harley-Davidson FXR 3 - - 1999 Harley-Davidson FXR...

S&S Cycle - Oil Pump Replacement Gasket Kit fits '36-'69 Big Twin Models Features: Made in the U.S.A. Fitment 1991 Harley-Davidson Dyna Sturgis FXDB - - 1990-1991 Harley-Davidson Low Rider Convertible...

S&S Cycle - Rocker Arm Shafts fits '99-'17 Twin Cam & '86-'22 Sportster Models (Except RH Sportster (OEM #17611-83)) Features: Made in the U.S.A. Fitment 2018-2020 Harley-Davidson Iron 1200...

S&S Cycle - Rocker Box Gasket Kit fits EVO Big Twin Models Features: Replacement gasket kit for rocker box part number 90-4095 Fitment 2000 Harley-Davidson FXR 4 - - 1999 Harley-Davidson Softail Night Train...

S&S Cycle - Valve Spring Kit fits '48-'84 Big Twin Models Features: To be used with cams with up to .550" lift Includes springs and aluminum top retainers 140-lb. seat pressure Must allow additional rocker clearance for 48-65 Panheads Made in...

S&S Cycle - Tappet Alignment Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Big Twin Evolution tappet blocks do not have counter-bored bolt holes; therefore, when a tappet block is removed (or even just loosened) it should be...

S&S Cycle - Rocker Cover Wrench Set Features: Four wrenches of different lengths for those hard-to-get-to rocker box screws For use on all Big Twin and XL Evolution-style motors Made in the U.S.A...

S&S Cycle - Adjustable Pushrods fits '84-'99 Evolution Big Twin Models Features: .4375" diameter chromoly steel for maximum strength Rocker boxes must be removed for installation or removal Made in the U.S.A...

S&S Cycle - Trap Door fits '86-'99 Evolution-Style S&S Transmission Cases or Stock Application Features: Billet construction Kit includes bearings and hardware Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch engagement and holding Both kit clutch plate stack height...

Belt Drives Ltd. - BDLPCP-0005 Replacement Clutch Kit for Rivera Primo Pro Clutch fits 'L84-'89 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive...

Belt Drives Ltd. - 1-5/8" Belt Drive fits '99-'06 FLT/​FLHT/​FLHR/​FLHX/​FLTR Models Features: 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of two half plates, four full plates and five steel drive...

Namz - Coil Cover fits FXR Models Features: Unique 180° radius design, highly polished and extra deep top mounting flange to allow custom spacers Simple to install Made in U.S.A. Fitment 2000 Harley-Davidson FXR...

Colony - 8610-1 5/8"-18 Crankcase/Oil Tank Hex Timing Plug fits '86-'95 Sportster Models (OEM #2326-26) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug...

Colony - 8703-2 Relief Valve Plug Kit fits '81-'84 Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - 8794-10 7/8" Torx/Button-Head Brake Rotor Mounting Hardware Kit w/ Nuts fits '99-'23 FXST/​FLST/FXWG (OEM #3655) Features: Brake rotor, sprocket and belt mounting kits Available to fit virtually all H-D brakes, chain and belt...