Harley Davidson

V-Twin - Chrome 45" Outer Primary Cover '37-'63 G, '37-'52 WL Models (OEM #60504-32) 45" chrome outer primary cover has accessible clutch area and may be cutout for electric start. Fitment: G 1937-1963 WL 1937-1952

V-Twin - 3/4" Inner Diameter Front or Rear Axle Spacer fits Custom application Axle spacer is constructed of stainless steel and features a polished finish. Can be used for front or rear applications.Must be cut to desired length Fitment: Custom...

V-Twin - Nylatron Swingarm Bushing Set fits '95-'02 FLHR, '82-'94 FXR, '82-'02 FLHT/FLT Models Nylatron swingarm four piece bushing set replaces swingarm bearings and stabilizes swingarm rubber mounts. Set is made of nylon plastic with higher wear...

V-Twin - 41mm Forks Front Axle Kit fits '00-'07 FLT Model (OEM #43364-00) - Chrome Chrome front axle kit includes chrome axle, chrome nut kit, 2 chrome spacers and washers. The axle has a 10-3/4" bearing surface length. Fitment: FLT 2000-2007 41mm...

V-Twin - 41mm Forks Front Axle Kit fits '84-'99 FLT Model - Chrome Chrome kit includes chrome axle and nut kit. The axle has a 10-5/8" bearing surface length. Spacers and washers included Fitment: FLT 1984-1999 41mm...

V-Twin - Chrome Rear Axle Kit fits '00-'05 FXD Model Chrome rear axle kit includes chrome 12-1/2" bearing surface length axle, nuts, sleeves, and spacers for belt drive applications. Fitment: FXD 2000-2005 Measurements: Bearing Surface:...

V-Twin - Chrome Billet Nut Set Fine Thread fits Custom Application Nut set is fine thread and measures 5/16 x 24 for side mount tail lamp brackets. Fitment: Custom application Tech Note: Required to use with #31-0714 side mount tail lamp...

V-Twin - Chrome Outer Primary Cover fits '37-'48 UL, '41-'54 FL, '36-'40 EL Models Chrome steel early type outer primary cover which is shallow in the sprocket area. This cover will accept a tapered front sprocket only for a type that has a key...

V-Twin - Chrome Billet Nut Set Coarse Thread fits Custom Application for Side Mount Tail Lamp Brackets Nut set has a coarse thread and measures 5/16 x 18 for side mount tail lamp brackets. Fitment: Custom application for side mount tail lamp...

V-Twin - Chrome Outer Primary Cover fits '55-'64 FL Model Chrome steel outer primary cover which has a deeper front cup to accept the compensator sprocket assembly or a tapered sprocket Fitment: FL 1955-1964

V-Twin - 39mm Front Axle Forks fits '04-'05 FXD Model (OEM #43758-04) - Chrome Axle with threaded end has a 7-1/4" bearing surface length and can be used to replace a worn out or damaged axle. Fitment: FXD 2004-2005 39mm...

V-Twin - Chrome Derby Cover fits '37-'48 UL, '36-'40 EL, '41-'63 GE Models (OEM #60555-36) Chrome derby cover for tin outer primary Fitment: UL 1937-1948 EL 1936-1940 GE 1941-1963 WL 1941-1963 FL 1941-1964

V-Twin - 3/4" Inner Diameter Rear Axle Spacer Set fits Custom Application Rear axle short style spacer allows wheels with 1" inner diameter bearings to fit 3/4" axle. Spacer has an overall length of 1-1/16". Spacers outer lip measures .127" and has...

V-Twin - Chrome Alternator Inner Primary Cover Steel fits Custom Application with Kick Starter Steel alternator type inner primary cover allows use of 1955-1964 type compensator outer covers on alternator and features a chrome finish. Note: Not for...

V-Twin - Chrome Front Axle fits '06-'07 FXDWG Model (OEM #40923-06) Axle with threaded end has a bearing surface length of 10-1/2" and can be used to replace a worn out or damaged axle Fitment: FXDWG 2006-2007 Measurements: Bearing Surface:...

V-Twin - Chrome Rear Axle Kit fits '06-'07 FXD Model (OEM #41114-06) Chrome rear axle kit includes chrome axle with 13-3/4" bearing surface length, nuts, sleeves, and 2 spacers for belt drive applications Fitment: FXD...

V-Twin - Inner Primary Cover Reinforcement Ring fits '37-'48 UL, '41-'54 FL, '36-'40 EL Models Reinforcement ring fits inner primary cover at engine crank shaft Fitment: UL 1937-1948 FL 1941-1954 EL 1936-1940

V-Twin - Chrome Front Axle fits '07-'17 FLST Model (OEM #41545-07) Axle with threaded end has a 10-1/4" bearing surface length and can be used to replace a worn out or damaged axle Fitment: FLST 2007-2017 Measurements: Bearing Surface:...

V-Twin - Black Inner Primary Cover fits '37-'48 UL, '36-'40 EL, '46-'54 FL Models (OEM #60620-36) Steel inner primary cover has a small hole at engine end and features a bloss black finish. Does not include oil drain holes. Note: Installer may...

V-Twin - Chrome Front Axle fits '07-'17 FXSTD Model (OEM #41549-07) Axle with threaded end has a 10-3/4" bearing surface and can be used to replace a worn out or damaged axle Fitment: FXSTD 2007-2017 Measurements: Bearing Surface:...

V-Twin - Black Inner Primary Cover fits '55-'64 FL Model (OEM #60620-55) Black steel inner primary cover has a large hole for splined sprocket shaft. Order reinforcement ring separately. Fitment: FL 1955-1964 Measurements: Body Width: 1...

V-Twin - Chrome Rear Axle Adjuster Kit fits '08-'17 FLST/FXST Models (OEM #4433) Chrome rear axle adjuster kit includes collars and adjuster screws with nuts Fitment: FLST 2008-2017 FXST 2008-2017

V-Twin - 49mm Front Axle Forks fits '06-'07 FXD Model (OEM #40928-06) - Chrome Axle with threaded end has a 9-1/8" bearing surface length and can be used to replace a worn out or damaged axle. Must be used with 1" bearings Fitment: FXD...

V-Twin - Chrome Inner Primary Cover fits '55-'64 FL Model (OEM #60620-55) Chrome steel inner primary cover has a large hole for splined sprocket shaft. Note: Slotted hole for chain guard mount Fitment: FL 1955-1964 Measurements: Body...

V-Twin - Zinc Plated Left Hand Wheel Spacer fits '08-Up FLH Model (OEM #11848) Zinc plated left hand wheel spacer. Fitment: FLH 2008-UP Measurements: Thickness: 0.255"

V-Twin - Chrome Dimpled Inspection Cover fits '37-'48 UL, '36-'40 EL, '41-'64 FL Models (OEM #60572-36) Chrome dimpled inspection cover for Big Twin models Fitment: UL 1937-1948 EL 1936-1940 FL 1941-1964

V-Twin - Wheel Hub Spacer fits '08-'17 FXD, '08-Up XLH Models (OEM #43905-08) Rear inner wheel hub spacer fits 2008-up FXD. Fitment: FXD 2008-2017 XLH 2008-UP Tech Note: Replacement spacer for #45-0792 wheel hub.

V-Twin - Chrome Dimple Derby Cover '37-'48 UL, '36-'40 EL, '41-'63 GE Models (OEM #60555-36) Chrome dimple derby cover Fitment: UL 1937-1948 EL 1936-1940 GE 1941-1963 WL 1941-1963 FL 1941-1964

V-Twin - Swingarm Bearing Kit fits '04-Up XLH Model Swingarm bearing kit includes 2 bolts, 2 bearings, and snap rings Fitment: XLH 2004-UP

V-Twin - Chrome Bird Style Derby Cover fits '37-'48 UL, '36-'40 EL, '41-'63 GE Models Chrome derby cover for outer primary with engraved bird logo Fitment: UL 1937-1948 EL 1936-1940 GE 1941-1963 WL 1941-1963 FL 1941-1964

V-Twin - Zinc Swingarm Bushing Set fits '00-'06 FLST/FXST Models (OEM #48048-00) Swingarm bushing set comes in a zinc finish Fitment: FLST 2000-2006 FXST 2000-2006

V-Twin - Chrome Inspection Cover fits '82-'84 FXR Model (OEM #60642-82) Chrome 5-speed inspection cover with shifter hole. Cover includes bushing. The mount screws and gasket must be ordered separately Fitment: FXR 1982-1984 Early 1984 Tech...

V-Twin - Zinc Swingarm Bushing Set fits '08-Up FXST, '00-Up FLST Models (OEM #48048-00A) Swingarm bushing set comes in a zinc finish Fitment: FXST 2008-UP FLST 2000-UP

V-Twin - Black Finned Derby Cover fits '84-'98 FXST, '85-'94 FXR, '86-'98 FLST Models Finned derby cover features a powder coated black finish. Order gasket and screws separately. Fitment: FL 1970-1984 FXST 1984-1998 FLT 1979-1998 FX...

V-Twin - Zinc Swingarm Bushing Set fits '07 FXST/FLST Models (OEM #48048-00A) Swingarm bushing set in a zinc finish. Set includes two bushings and two spacers. Fitment: FXST 2007-2007 FLST 2007-2007

V-Twin - Chrome Finned Ignition System Cover fits '71-'03 Sportster Model Finned ignition system cover with chrome finish. Fitment: XL 1971-2003

V-Twin - Chrome Rear Axle Kit fits '08-'17 FXD Model (OEM #41114-08) Chrome rear axle kit includes chrome 13-5/8" bearing surface length axle, nuts, sleeves and spacer for belt drive applications Fitment: FXD 2008-2017 Measurements: Bearing...

V-Twin - Swingarm Bearing Kit fits 2004-Up XLH Model Swingarm bearing kit includes 2 bearings, 2 chrome bolts, and 2 snap rings. Fitment: XLH 2004-UP

V-Twin - Chrome Rear Axle fits '09-'13 FLT Model (OEM #41056-09) Axle with a hex head to fit with 25mm bearings and a threaded end can be used to replace a worn out or damaged axle. Fitment: FLT 2009-2013

V-Twin - 45" Front Wheel Hub Internal Kit fits '36-'52 W Model Front wheel hub kit includes race, ball bearings, and seal with spring fork front axle Fitment: W 1936-1952