Harley Davidson

Drag Specialties - Starter Drive Clutch fits '06 Dyna, '07-'17 Twin Cam Models (OEM #31632-06, 31633-07) Features: High-quality components to repair common failures of OEM Harley starters Designed to improve clutch life under hard starting...

Spyke - Starter Jackshaft Kit fits '99-'06 Twin Cam Models (Except '06 Dyna) - 10 Tooth Features: Complete assembly includes shaft extension, pinion gear, coupler, spring and clips Fitment 2006 Harley-Davidson Street Glide...

Drag Specialties - Chrome Ignition Module Cover fits '86-'03 Sportster Models (OEM #66325-82) Features: Smooth stamped steel construction Fitment 2002-2003 Harley-Davidson 883 Roadster XLR - - 1999-2003 Harley-Davidson 883...

V-Twin - 16" x 3.00" Front or Rear Spoke Wheel fits '73-'84 FL, '73-'82 Rear Only FX Models Replica 16" X 3.00" single disc wheel assembly features chrome rim, 40 chrome spokes, chrome hub with internals. This wheel has a large valve stem hole to...

Wyatt Gatling - Shovelhead Chrome Rocker Box Line Kit fits '79-'83 FLT, '66-'84 FL, '82-'83 FXR Models Natural brass rocker box line kit includes "T" to oil the heads with 6mm brass tube and brass fittings. Tubes feature a chrome finish over the brass...

Wyatt Gatling - Brass Shovelhead Rocker Box Line Kit fits '79-'83 FLT, '71-'84 FX, '82-'83 FXR Models Natural brass rocker box line kit includes "T" to oil the heads with 6mm brass tube and brass fittings. Install hex fitting in the engine block...

York - 48 Tooth Rear Chrome Sprocket Flat fits '82-'99 Sportster Models 5-Spoke rear flat sprocket with a chrome finish. Sprocket is 48 tooth. Fitment: XL 1982-1999 Custom application Measurements: Inner Diameter: 1.9764" Inner Diameter: 50...

V-Twin - Muffler T Bolt Set Muffler pipe t-bolt set is a replacement for all of our muffler pipes which have channel type mounting. Supplied with nuts. The stud features a 1" x 5/16" x 18" thread. Sold in a quantity of 2. Fitment: Replacement...

V-Twin - Black 1" Exhaust "P" Clamp Set fits Custom Application for Exhaust Pipes or Footpegs Black 1" exhaust P-clamp set is for mounting exhaust pipes or frame tube. Measures 3-5/8" from below the bolt hole to end. Sold in a quantity of 2...

V-Twin - Drag Exhaust Pipe Heat Shield Set fits '70-'84 FX, '70-'84 FXS, '70-'84 FXE Models - Chrome Chrome heat shield set for drag pipes on FX, FXE and FXS models. Could fit muffler pipes if trimmed down. Pipes are 38" long with slash cut ends and...

V-Twin - Muffler T Bolt Set fits Replacement Application for Muffler Pipes with Channel Mounting Muffler pipe t-bolt set is a replacement for all of our muffler pipes which have channel type mounting. Supplied with nuts. The 5/16" stud is 2" long...

V-Twin - 1-3/4" Black Exhaust Pipe Mount Bracket fits for Custom Application Black 1-3/4" exhaust pipe mounting bracket is used to mount drag pipes on mufflers with the use of T bolts. Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits...

V-Twin - Black Exhaust Bracket fits '71-'85 FX Model Black channel exhaust mount bracket fits MCM drag pipes. Pipes are 38" long with slash cut ends and features channel mounts for mounting. For mounting drag pipes, use t-bolts...

V-Twin - 1-3/4" Exhaust Hanger Clamp Set fits for Custom Application - Chrome 1-3/4" hanger style exhaust clamp set with long straps to mount exhaust body to the frame. Features a chrome finish. Set of two. Includes bolt set. Fitment: Custom...

Drag Specialties - Rear Chain Adjuster Bolt fits '48-'72 Big Twin (3/ 8”-24 x 3”) (OEM #41576-36) Features: Adjuster bolts for rear chain Fitment 1971-1972 Harley-Davidson 1200 Super Glide...

V-Twin - Front Fender Raw Steel fits Custom application for 21" wheel Wyatt front fender is 2mm thick raw steel laser cut from full piece blanks. The outer diameter of the bracket is 8". Inside width of the fender is 4-7/8". Fender has a 140°...

Drag Specialties - Starter Solenoid fits '80-'88 FLT/​FLHT & '82-'88 FXR Models (OEM #31489-79) Features: Features zinc-finished moisture-proof case, hardened steel plunger and long-life contact disc Replacement Part for...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '08-'10 Sportster (w/o ABS) (Single Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '06-'07 Sportster (Single Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2.15” fits '06-'07 Sportster (Single Disc (OEM #43557-05)) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '14-'22 1200C/​1200X (w/ ABS) (Dual Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '08-'17 FLT/​FLHT/​FLHR/​FLTR/​FLHX (w/o ABS) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '07-'17 FLST/C/F/N (w/o ABS) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings installed and...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2.15” fits '07-'17 Softails (w/o ABS) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings installed...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '08-'17 FXD Model (w/o ABS) (Single Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2.15” fits '08-'17 FXD (w/o ABS) (Single Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '11-'21 1200C/​1200X (w/o ABS) (Single Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2,15” fits '08-'22 Sportster (w/o ABS) (Except XL883L/N/R and RH Sportster) (Single Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '11-'22 1200C/​1200X (w/o ABS) (Dual Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with...

Drag Specialties - 40 Spoke Black Laced Wheel 21” x 2.15” fits '00-'06 FXST/B/C, '00-'05 FXDWG (OEM #43671-00, 43700-00) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and...

Drag Specialties - 40 Spoke Black Laced Wheel 16” x 3” fits '86-'99 FLST/C/F/N (OEM #43005-86) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings...

Drag Specialties - 40 Spoke Black Laced Wheel 16” x 3” fits Front Wheel '73-'84 FL, Rear Wheel '73-'84 FL, '73-'81 FX Models (OEM #40908-81) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...

Drag Specialties - 40 Spoke Black Laced Wheel 16” x 3” fits '00-'07 FLT/​FLHT/​FLHR/​FLHX/​FLTR (OEM #40960-00) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with...

Drag Specialties - 40 Spoke Black Laced Wheel 21” x 2.15” fits '00-'03 FXD/B/C/L, '00-'05 XL (Single/​Dual Disc (OEM #43557-00, 43557-00A)) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...

Drag Specialties - 40 Spoke Black Laced Wheel 21” x 2.5” fits '99 FXD, '86-'99 XL (Single or Dual Disc (OEM #43557-87)) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and...

Drag Specialties - 40 Spoke Black Laced Wheel 19” x 2.5” fits '00-'03 FXD/B/C/L, '00-'05 XL (Single/​Dual Disc (OEM #43312-00A)) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully...

Drag Specialties - 40 Spoke Black Laced Wheel 19” x 2.5” fits '08-'17 FXD (w/o ABS) (Single Disc) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings...

Drag Specialties - 40 Spoke Black Laced Wheel 21” x 2.15” fits '84-'96 FXST, '93-'96 FXDWG, '84-'86 FXWG (Single Disc (OEM #43671-84)) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '99 FXD/​FXDWG, '97-'99 XL (OEM #40975-86, 40975-86A) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued...

Drag Specialties - 40 Spoke Chrome Laced Wheel 16” x 3” fits '00-'05 FXST, '00-'06 FLST, '00-'05 FXD/​FXDWG, '00-'04 Sportster (OEM #40700-03, 40975-00) Features: Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...