Harley Davidson

V-Twin - 23-1/2" Hard Chrome 35mm Fork Tube Set fits '73-'74 Sportster & FX Model Features: This fork tube set is stock 35mm diameter X 23-1/2" long Before installing, compare new and old tubes Be sure the stock top plugs fit into the new fork...

V-Twin - Chrome 35mm Fork Tube w/ 23-1/2" Length fits '73-'77 FX, '73-'74 Sportster Models (OEM #45977-73) Fork tube set is 23-1/2" stock length, Before installing, compare new and old tubes. Be sure the stock top plug threads into the new fork...

V-Twin - Chrome 35mm Fork Tube w/ 25-1/4" Length fits '75-'83 XLCH, '79-'82 XLS, '77-'83 FXS Models (OEM #45644-77) Fork tube set is 2" over stock length for XLH, XLXH, XLCR, 1983 XLX, XLS models and stock length for 1979-1982 XLS models. Before...

V-Twin - 23-1/4" Hard Chrome 35mm Fork Tube Set fits '76-'83 FX, '75-'83 XLCH/XLH Models Features: Hard chrome fork tubes are Showa type with a stock length of 23-1/4" Before installing, compare new and old tubes. Be sure the stock top plugs it into...

V-Twin - Brake Pedal Polished Alloy fits '82-'94 FXR Model (OEM #42523-82) FXR brake pedal has a polished alloy finish and includes the bushings installed Note: Must order rod end, wave washer, cotter pin and the master cylinder, which includes the...

V-Twin - Primary Gasket Kit fits '85-'94 FLT, '84-'93 FXR Models FXR/FLT Primary gasket kit is a three piece kit Fitment: FLT 1985-1994 FXR 1984-1993 Late 1984

V-Twin - Shifter Linkage Kit fits '81-'84 FXR Model FXR shifter linkage kit includes rod, heel toe shifter lever , shifter lever, V-Tech inspection cover and inner shifter lever. Fitment: FXR 1981-1984 early 1984 FXR 1984-1984 early 1984

V-Twin - Shifter Sleeve Kit fits '84-'94 FXR Model FXR shifter sleeve kit includes a nylon sleeve, lock tab and 2 o-rings Note: The long sleeve goes between the two outer brass bushings - one is the inspection cover and one is the inner primary...

V-Twin - Shifter Rod Assembly fits '82-'94 FXR Model (OEM #33728-82A) FXR shifter rod assembly includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1984 FXR 1985-1994

V-Twin - Mid Control Kit fits '82-'86 FXR Model - Black Features: FXR mid control kit features a black peg brackets and polished brake pedal Factory style components for installation Order brake line, reservoir feed line and additional hardware...

V-Twin - Mid Control Kit Black W/ Gaskets & Footpegs fits '87-'93 FXR Model FXR mid control kit includes black foot peg mounts, polished brake pedal, primary insepction cover, chrome shifter and a chrome master cylinder Kit Includes: Factory...

V-Twin - Mid Control Kit Chrome W/ Footpegs fits '87-'93 FXR Model FXR mid control kit includes chrome bracket, pedal footpeg mounts, and stock driver footrests. Fitment: FXR 1987-1993

V-Twin - Mid Control Kit fits '83-'86 FXR Models - Chrome Features: FXR mid control kit features chrome mounts, chrome brake pedal and footpeg supports. factory style components for installation. Order brake line, reservoir feed line and additional...

V-Twin - Rear Brake Plunger Zinc Plated fits '82-'87 FXR Model (OEM #42437-82) Zinc plated FXR rear brake plunger features a 5/16" x 24 thread and measures 2-7/8" from the hole to the end of the thread. Note: The clevis pin is not...

V-Twin - 35mm Triple Tree Set Chrome fits '82-'87 FXR Model 35mm FXR triple tree set features a chrome finish. Fitment: FXR 1982-1987

V-Twin - 39mm Triple Tree Set Polished fits '88-'03 Sportster, '88-'94 FXR Models 39mm FXR triple tree set includes a polished top and lower tree. Fitment: FXR 1988-1994 XL 1988-2003

V-Twin - Stock Kickstand Black fits '82-'90 FXR Model Features: Stock length kickstand features a black finish and is for FXR models Pin not included, must order separately Fitment: FXR 1982-1990

V-Twin - Electrical Wiring Panel Set Black fits '86-'94 FXR Model Features: Black flat left and offset right FXR electrical wiring panel set Panels mount by 1/4"-20 well nuts and 1/4" x 20 x 3/4" screws The right side accepts a starter relay and 4...

V-Twin - Fuel Petcock Alloy fits '82-'94 FXR Models Fuel petcock with 90° elbow features an alloy finish specifically designed for FXR models. Note: Petcock has a 5/16" fuel outlet. Fitment: FXR 1982-1994

V-Twin - Dash Panel Bib Chrome - fits '88-'94 FXRS (OEM #61643-88) Features: Dash panel extension features a chrome finish for FXRS models.  Mounts to rear gas tank bolts to fit with FXD-FXR dash panels. Note: Order bolt kit...

V-Twin - Dash Panel Bib Black - fits '88-'92 FXRS (OEM #61635-88) Features: Fuel tank panel extends the length of the dash to full length of the gas tank. Fuel tank panel features a black finish. Mounts to rear gas tank bolts to fit with FXD-FXR...

V-Twin - Rear Axle Kit Zinc Plated fits '82-'94 FXR Model FXR rear axle kit includes zinc plated components and has a 3/4" diameter. Fitment: FXR 1982-1994

V-Twin - Mid Control Kit W/ Pegs & Rear Brake Msster Cylinder for '06-'17 FXD FXD mid control kit includes chrome components and is for stock replacement on FXD mid control models where the shifter shaft goes through the primary cover, or for the...

V-Twin - Rear Brake Pedal Polished for '91-'17 FXD (OEM #42617-99) FXD polished rear brake pedal. Note: Brake rod included. Fitment: FXD 1991-2017

V-Twin - 49mm Triple Tree Set Chrome - fits '06-'07 FXD Models Chrome 49mm triple tree set includes 1 upper and 1 lower fork tree with stem for FXD models.

V-Twin - 39mm Single Disc Fork Assembly Chrome  for '00-'03 FXD 39mm single disc fork assembly features chrome lower sliders, springs, hard chrome fork tubes and components installed. Assembly accepts 2000-up type calipers. Assembly measures...

V-Twin - 39mm Triple Tree Set Chrome for '90-'05 FXD FXD 39mm triple tree set includes chrome top tree, chrome bottom tree, dust shield set and stem nut. Fitment: FXD 1990-2005

V-Twin - 49mm Triple Tree Set Polished for '08-'17 FXD Polished 49mm triple tree set includes 1 upper and 1 lower fork tree, narrow type. Fitment: FXD 2008-2017

V-Twin - 45 Amp Three Phase Alternator Kit for '99-'03 FXD/FXDWG FXD three phase alternator kit is 45 amp. Fitment: FXDWG 1999-2003 FXD 1999-2003

V-Twin - 50 Amp Three Phase Alternator Kit fits '12-'17 FXD/FXDWG FXD three phase alternator kit is 50 amp. Fitment: FXD 2012-2017 FXDWG 2012-2017

V-Twin - Stock Shape 5.1 Gallon Gas Tank Raw for '10-'17 FXDWG/FXDB (OEM #61593-10) Raw replacement gas tank has a right side bung, and a left side fuel gauge opening. The tank is for EFI models, and has a fuel capacity of 5.1 gallons. Check the tank...

V-Twin - Dash Panel fits '95-'03 FXD, '88-'94 FXR Models (OEM #67185-88, 67189-95) This dash panel features a black or chrome finish. For FXD and FXR models, accepts 85MM GPS speedometers and electric tachometers. Can be installed on 1948-1984 2 piece...

V-Twin - Dash Panel Bib Black for '93-'06 FXD (OEM #61655-91) FXD dash panel extension features a black finish. Fitment: FXD 1993-2006

V-Twin - Bobbed 2.3 Gallon Gas Tank fits '84-'99 FXST, '86-'99 FLST Models Bobbed gas tank accepts a left side petcock and has a fuel capacity of 2.3 gallons. Tank includes mounting hardware. Specifications: Fuel Capacity: 2.3 gallons. Petcock...

V-Twin - Replica XL 2 Gallon Steel Gas Tank Raw fits '57-'78 Sportster Model Features the classic XR 750 style with raw steel construction. Specifications: Petcock located on the right side. Accepts bung-style vented gas cap (must be ordered...

V-Twin - Hap Jones Peanut 2.0 Gallon Gas Tank Hap Jones 2.0 gallon gas tank is the hi-tunnel type with a die cast Chopper bayonet style gas cap. Gas tank accepts 1/4 inch petcocks.

Burly Brand - 12" Handlebar Cable/Line Kit for Ape Hanger Handlebars fits '18-'23 FXBB/​FXLR/​FXST W/O ABS - Black Vinyl Features: Complete installation kit for Burly Ape hangers Kit includes extended brake line (unless noted), extended clutch...

Burly Brand - 13" Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hanger Handlebars fits '17-'20 FLHTCU/L, FLHTK/L, FLHX/S W/ ABS Features: Complete installation kit for Burly Ape hangers Kit includes extended brake line (unless noted),...

Burly Brand - 13" Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hanger Handlebars fits '17-'20 FLHT/​FLHX W/O ABS Features: Complete installation kit for Burly Ape hangers Kit includes extended brake line (unless noted), extended clutch...

Burly Brand - 12" Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hanger Handlebars fits '06 FXDWG Model Features: Complete installation kit for Burly Ape hangers Kit includes extended brake line (unless noted), extended clutch cable/clutch...