Exhaust
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Out of stock
V-Twin - 31-2126 - Parkerized Exhaust Clamp Kit
V-Twin
$45.35V-Twin - 31-2126 - Parkerized Exhaust Clamp KitDescriptionParkerized exhaust pipe clamp kit is for single exhaust. Kit includes muffler body clamp with reinforcement clip, muffler inlet clamp, and two piece front header pipe clamp set.Order bolt sets...$45.35 -
Out of stock
V-Twin - 31-2125 - Zicad Plated Exhaust Clamp Kit
V-Twin
$78.23V-Twin - 31-2125 - Zicad Plated Exhaust Clamp KitDescriptionZicad plated three piece exhaust clamp kit is for single exhaust.*NOTE: Must order bolt sets separately. *NOTE: Zicad is a dull shade of zinc similar to cadmium. Fits:EL...$78.23 -
Out of stock
V-Twin - 31-1961 - Crossover Header Clamp
V-Twin
$41.71V-Twin - 31-1961 - Crossover Header ClampDescriptionZinc plated crossover header clamp attaches left side crossover pipe to oil tank mount bolt. 1-3/4" inner diameter clamp with tab. For use with wrap around oil tank swingarm frames. Fits:FL...$41.71 -
Out of stock
V-Twin - 31-1878 - 45 WL/G Rear Header Bracket
V-Twin
$204.20V-Twin - 31-1878 - 45 WL/G Rear Header BracketDescription45 WL/G rear header bracket mounts the header pipe to the rear cross rod that holds side strap and footboards. Clamp has a large hole to fit over cross rod, and 1-1/2" clamp to fit header pipe...$204.20 -
Out of stock
V-Twin - 31-1814 - 3-1/2 inch Muffler Hanger Clamp Set
V-Twin
$63.23V-Twin - 31-1814 - 3-1/2 inch Muffler Hanger Clamp SetDescription3-1/2" muffler hanger clamp set includes the bolts.Attaches to 1995-16 Touring models. Sold in a quantity of 2. ...$63.23 -
Out of stock
V-Twin - 31-1806 - Chrome 7 inch Universal Exhaust Strap Bracket
V-Twin
$13.88V-Twin - 31-1806 - Chrome 7 inch Universal Exhaust Strap BracketDescriptionChrome universal exhaust strap bracket is 7" long and 1" wide.Sold as a 2 piece set. Fits:Custom applicationAdditional Information UOM1 - SET MeasurementsAdditional...$13.88 -
Out of stock
V-Twin - 31-1715 - Muffler Clamp Kit
V-Twin
$45.35V-Twin - 31-1715 - Muffler Clamp KitDescriptionThree piece clamp kit features a stainless steel finish. Kit includes two sleeve gaskets and clamp. For stock crossover system.*NOTE: Seals required for HDI model, not included. Fits:FLHR 2017-UPFLH...$45.35 -
Out of stock
V-Twin - 31-1634 - 1 inch Short inchP inch Muffer Clamp Set
V-Twin
$23.53V-Twin - 31-1634 - 1 inch Short inchP inch Muffer Clamp SetDescription1" short "P" muffler clamp set features a parkerized finish. Fits:Custom applicationAdditional Information UOM1 - SET ManufacturerV-Twin OriginImported$23.53 -
Out of stock
V-Twin - 31-1455 - Front Exhaust Pipe Clamp
V-Twin
$36.25V-Twin - 31-1455 - Front Exhaust Pipe ClampDescriptionFront exhaust pipe clamp features a chrome finish. Fits:FLSTS 1997-2007Additional Information OEM No.65654-97 UOM1 - EA ManufacturerV-Twin OriginUSA$36.25 -
Out of stock
V-Twin - 31-1438 - Muffler Inlet Clamp Set
V-Twin
$45.35V-Twin - 31-1438 - Muffler Inlet Clamp SetDescriptionMuffler inlet clamp set OEM construction with natural stainless steel finish. Features inner and outer reinforcement blocks, 1-7/8" inner diameter.For left side muffler and crossover joint connection...$45.35 -
Out of stock
V-Twin - 31-1379 - 2.5 inch Muffler Hanger Clamp Set
V-Twin
$63.23V-Twin - 31-1379 - 2.5 inch Muffler Hanger Clamp SetDescriptionMuffler hanger clamps with bolts included. Clamps are 2 1/2" diameter to hold muffler in place.Attached 2.5" diameter muffler to 1995-17 touring. Sold in a quantity of 2. *NOTE: Order end...$63.23 -
Out of stock
V-Twin - 31-1359 - 2-1/2 inch Muffler Body Clamp Set Chrome
V-Twin
$27.22V-Twin - 31-1359 - 2-1/2 inch Muffler Body Clamp Set ChromeDescription2-1/2" muffler body clamp set features a chrome finish. Fits:FX 1957-1976Additional Information OEM No.65279-57 UOM1 - SET ManufacturerV-Twin OriginImported 2025 Catalog Pages942$27.22 -
Out of stock
V-Twin - 31-1326 - M8 FLH Muffler Clamp Set
V-Twin
$39.89V-Twin - 31-1326 - M8 FLH Muffler Clamp SetDescriptionM8 muffler clamp kit includes one right and one left clamp. Gasket not used on domestic models.If required, use with exhaust gasket seal set, OEM# 65900056, available separately. Fits:FLH...$39.89 -
Out of stock
V-Twin - 31-1287 - inchP inch Muffler End Clamp Set
V-Twin
$23.53V-Twin - 31-1287 - inchP inch Muffler End Clamp SetDescriptionChrome muffler 1-3/4" inner diameter end clamps are P shaped for flat side mounting of bracket. Fits:Custom applicationAdditional Information UOM1 - SET ManufacturerV-Twin OriginImported$23.53 -
Out of stock
V-Twin - 31-1040 - Muffler Clamp Set Stainless Steel
V-Twin
$25.35V-Twin - 31-1040 - Muffler Clamp Set Stainless SteelDescriptionMuffler clamp set is made of stainless construction. Clamps have a 1-7/8" inner diameter used to clamp muffler inlets to 1-3/4" exhaust tubing. Fits:UniversalAdditional Information UOM1 -...$25.35 -
Out of stock
V-Twin - 31-0071 - FLT Muffler T Bolt Set
V-Twin
$19.94V-Twin - 31-0071 - FLT Muffler T Bolt SetDescriptionMuffler pipe t-bolt set with nuts and washers to mount right and left mufflers feature a zinc plated finish.Sold as a set of 4. Fits:FLT 1995-UPAdditional Information UOM1 - SET ManufacturerV-Twin ...$19.94 -
Out of stock
V-Twin - 31-0058 - Black 1-1/8 inch Exhaust inchP inch Clamp Set
V-Twin
$23.88V-Twin - 31-0058 - Black 1-1/8 inch Exhaust inchP inch Clamp SetDescription1-1/8" P style clamp set features a black finish.Sold as a set of 2. ...$23.88 -
Out of stock
V-Twin - 31-0040 - OE Exhaust Bottom Clamp
OE
$28.98V-Twin - 31-0040 - OE Exhaust Bottom ClampDescriptionOE exhaust bottom clamp. Fits:XL 2014-UPAdditional Information OEM No.65441-06 UOM1 - EA ManufacturerOE OriginUSA Tech NoteSuggested to use with #31-1783, XL Pipe Clamp Set$28.98 -
Out of stock
V-Twin - 31-0035 - OE Exhaust Top Clamp
OE
$28.98V-Twin - 31-0035 - OE Exhaust Top ClampDescriptionOE exhaust top clamp. Fits:XL 2014-UPAdditional Information OEM No.65440-06 UOM1 - EA ManufacturerOE OriginUSA Tech NoteSuggested to use with #31-1783, XL Pipe Clamp Set$28.98 -
Out of stock
V-Twin - 30-3164 - 1-3/4 inch Rigid Shotgun Shovelhead Header Set
Paughco
$497.30V-Twin - 30-3164 - 1-3/4 inch Rigid Shotgun Shovelhead Header SetDescriptionChrome rigid shotgun Shovelhead header set is for rigid frames, with a flat pipe to connect to the front header pipe.Sold as a 3 piece set. Order bracket separately. For use with...$497.30 -
Out of stock
V-Twin - 30-3157 - Exhaust Drag Pipe Set Slash Cut
Paughco
$426.25V-Twin - 30-3157 - Exhaust Drag Pipe Set Slash CutDescriptionChrome Paughco 40" drag pipe set features slash cut ends and has O2 sensor bungs, allowing them to fit late 1985-2009 Evolution and Twin Cam models.Mounting hardware is included. *NOTE:...$426.25 -
Out of stock
V-Twin - 30-3006 - Wyatt Gatling Exhaust Drag Pipe Set Slash Cut Ends
V-Twin
$170.16V-Twin - 30-3006 - Wyatt Gatling Exhaust Drag Pipe Set Slash Cut EndsDescriptionExhaust drag pipe set with formed heat shields come with 1-3/4" slash cut and is 38" long.Set of two. The customer may remove the front header clamp from the heat shield, to...$170.16 -
Out of stock
V-Twin - 30-1883 - Seamless Tapered Exhaust System
V-Twin
$359.38V-Twin - 30-1883 - Seamless Tapered Exhaust SystemDescriptionFront and rear 1-3/4" header pipes are a one piece seamless design, integrating tapered mufflers. Features bolt on installation.Required to use with an exhaust pipe mount bracket and muffler T...$359.38 -
Out of stock
V-Twin - 30-1662 - XL Upsweep Megaphone Kit Rigid
V-Twin
$460.45V-Twin - 30-1662 - XL Upsweep Megaphone Kit RigidDescriptionUpsweep megaphone kit without heat shields. Includes one piece header pipe and two right hand megaphone muffler for a true "Stack" look. Accepts 1957-85 XL Ironhead motors. Kit is for use on...$460.45 -
Out of stock
V-Twin - 30-1661 - Evolution Upsweep Megaphone Kit Rigid
V-Twin
$460.45V-Twin - 30-1661 - Evolution Upsweep Megaphone Kit RigidDescriptionEvolution Upsweep megaphone kit without heat shields. Includes one piece front header pipe and two right hand upsweep megaphone muffler for a true "Stack" chrome look.Installer will be...$460.45 -
Out of stock
V-Twin - 30-1553 - 2 Into 2 Exhaust System Staggered Style
Volt Tech
$584.72V-Twin - 30-1553 - 2 Into 2 Exhaust System Staggered StyleDescriptionChrome Rinehart crossback 2 into 2 exhaust drag pipes include header pipes, staggered mufflers, heat shields, baffles and billet end caps.Chrome Rinehart crossback 2 into 2 exhaust...$584.72 -
Out of stock
V-Twin - 30-1435 - M8 Muffler Clamp/Seal kit
V-Twin
$34.44V-Twin - 30-1435 - M8 Muffler Clamp/Seal kitDescriptionM8 muffler clamp/seal kit includes clamp set and gasket seal set.Clamps fits over muffler inlet seal, under clamp on muffler end. kit is required for correct installation of stock or accessory type...$34.44 -
Out of stock
V-Twin - 30-1403 - 1-9/16 inch Baffle Set 11-3/4 inch Long
V-Twin
$16.36V-Twin - 30-1403 - 1-9/16 inch Baffle Set 11-3/4 inch LongDescription1-9/16" baffle set features two 11-3/4" long baffles and includes mounting hardware. Fits:Custom applicationAdditional Information UOM1 - SET ManufacturerV-Twin OriginImported ...$16.36 -
Out of stock
V-Twin - 30-0786 - Exhaust Drag Pipe Set Sweeper
Wyatt Gatling
$341.62V-Twin - 30-0786 - Exhaust Drag Pipe Set SweeperDescriptionChrome sweeper drag exhaust pipe set has a 1-3/4" header and 2-1/4" outer diameter at the end.Pipe set includes brackets and is equipped with 18mm oxygen sensor bungs and plugs. Sold in a...$341.62 -
Out of stock
V-Twin - 30-0724 - Exhaust Flange Set
V-Twin
$15.86V-Twin - 30-0724 - Exhaust Flange SetDescriptionDrilled style flange clamp set.Sold as a pair. Fits:FLT 1984-2016FXD 1991-2017XL 1986-UPFLST 1986-2017FXST 1984-2017FXR 1984-1994Additional Information UOM1 - SET ManufacturerV-Twin OriginImported 2025...$15.86 -
Out of stock
V-Twin - 30-0695 - Factory Sample XL Exhaust Drag Pipe Set Turn Down
V-Twin
$117.56V-Twin - 30-0695 - Factory Sample XL Exhaust Drag Pipe Set Turn DownDescriptionFactory Sample XL chrome 2-1/4" exhaust drag pipe set turn down slash style features built in mount tabs to bolt to bracket. Baffles not included.Will work with mid controls,...$117.56 -
Out of stock
V-Twin - 30-0694 - Factory Sample Wyatt Gatling Exhaust Drag Pipe Set Side
V-Twin
$117.56V-Twin - 30-0694 - Factory Sample Wyatt Gatling Exhaust Drag Pipe Set SideDescriptionChrome side sweeper drag pipes have a 2" diameter. Pipes have 18mm oxygen sensor bungs and includes plugs for non EFI applications.Sold in a quanity of 2. Pipes are for...$117.56 -
Out of stock
V-Twin - 30-0691 - Factory Sample Exhaust Drag Pipe Set Shotgun
Radii
$117.56V-Twin - 30-0691 - Factory Sample Exhaust Drag Pipe Set ShotgunDescription1-3/4" shotgun exhaust drag pipe set with slash cut ends, that sit below the pegs, features a chrome finish. Nothing sounds like 1-3/4" drag pipes with slash cut ends. Put these on...$117.56 -
Out of stock
V-Twin - 30-0690 - Factory Sample Exhaust Drag Pipe Set Side Slash Style
V-Twin
$117.56V-Twin - 30-0690 - Factory Sample Exhaust Drag Pipe Set Side Slash StyleDescriptionChrome 2-1/4" exhaust drag pipe set side slash style features built in mount tabs to bolt to stock bracket.Will work with forward control or mid control models. *NOTE:...$117.56 -
Out of stock
V-Twin - 30-0689 - Factory Sample Exhaust Goose Style Drag Pipe Set
Cycle Shack
$117.56V-Twin - 30-0689 - Factory Sample Exhaust Goose Style Drag Pipe SetDescriptionChrome goose style drag pipes have slash cut ends and are 1-3/4" diameter with a length of 35".The goose style bend directs the exhaust away from the rear wheel. ...$117.56 -
Out of stock
V-Twin - 30-0688 - Factory Sample Exhaust Drag Pipe Set Goose
Cycle Shack
$117.56V-Twin - 30-0688 - Factory Sample Exhaust Drag Pipe Set GooseDescriptionChrome goose style drag pipes have a diameter of 1-3/4" with a length of 40". Set uses stock floating 2 hole flange and snap ring retainer from original pipes.**CAUTION: These...$117.56 -
Out of stock
V-Twin - 30-0542 - Exhaust Drag Pipe Set Straight Cut Chrome
Wyatt Gatling
$285.43V-Twin - 30-0542 - Exhaust Drag Pipe Set Straight Cut ChromeDescriptionVenom style drag exhaust pipe set has straight cut ends with a 2-1/8" diameter and features a chrome finish.Sold in a quantity of 2, this set is for right or left side drive...$285.43 -
Out of stock
V-Twin - 30-0454 - 2-1/4 inch Snuff or Not Pipe Baffle Set
Wyatt Gatling
$23.75V-Twin - 30-0454 - 2-1/4 inch Snuff or Not Pipe Baffle SetDescriptionSnuff or not baffle pipe set for 2-1/4" tube style baffles for added back pressure.Sold in a quantity of 2. *NOTE: Baffle diameter denotes the size of the pipe into which it fits...$23.75 -
Out of stock
V-Twin - 30-0420 - Exhaust Port Flange Kit
V-Twin
$43.31V-Twin - 30-0420 - Exhaust Port Flange KitDescriptionExhaust port flange kit includes 2 flanges, 2 gaskets, 2 snap rings, 4 nuts, and 4 studs. Fits:FXST 2004-2017FXD 2006-2017FLST 2004-2017XL 2002-UPAdditional Information UOM1 - KIT ManufacturerV-Twin ...$43.31 -
Out of stock
V-Twin - 30-0387 - Exhaust Drag Pipe Set Curvado
Wyatt Gatling
$242.70V-Twin - 30-0387 - Exhaust Drag Pipe Set CurvadoDescriptionChrome 2" curvado pipes set is for XL models. Set includes removable 18mm oxygen sensor plugs, brackets and flanges. These pipes provide plenty of flow and a great sound. The unique shape will...$242.70
Harley Davidson Exhaust
The sound that erupts from a Harley Davidson’s exhaust is its most distinguishing characteristic. That unmistakable roar commands your attention when a Harley passes by, and the louder the rumble, the stronger the pipes. But Harley Davidson exhaust systems aren’t just about sound. Quality Harley exhaust parts can enhance your bike’s performance. Aftermarket Harley exhaust parts can help your bike breathe easier by providing smoother, more consistent airflow from the engine, optimizing its power and efficiency. These aftermarket exhaust parts are often lighter than factory Harley exhausts, reducing the weight of your bike, and improving handling and acceleration.
In addition, if you want to make a statement, upgrading your Harley exhaust is one of the most noticeable modifications you can make. Whether you prefer the sleek look of chrome or the boldness of black glossy or unfinished pipes, you can make your bike look, sound, and perform better with Harley Davidson exhaust pipes and other parts from industry-leading brands such as Bassani and Vance & Hines. We carry a wide range of 2-into-1 Harley exhaust systems as well as other Harley exhaust fitments to suit your needs.
Harley Exhaust FAQ:
What Are the Different Types of Harley Exhaust Options for my Harley Model?
2-into-1 Exhaust: This style combines the pipes from both cylinders into a single pipe that exits at the rear of the bike. This is the most popular Harley exhaust style at Deadbeat Customs! 2-into-1 Harley exhausts offer significant performance benefits by consolidating the exhaust into a single pipe, allowing the engine to breathe more easily and produce more power. This added efficiency increases the motorcycle’s horsepower and torque. The 2-into-1 Harley exhaust also gives the bike a deeper, more aggressive sound while also reducing the weight of the bike.
2-into-2 Exhaust: Similar to the 2-into-1 style, but with two separate pipes exiting the rear of the bike, enabling even power distribution.
Slash Cut Exhaust: This style of Harley Davidson exhaust pipe features a diagonal cut on the end giving the bike a sleek, stylish look while potentially improving exhaust flow.
Shotgun Exhaust: This style of Harley Davidson exhaust system features two pipes exiting the rear of the bike in parallel, resembling a double-barrel shotgun.
Fishtail Exhaust: This style features a flared end on the exhaust pipe, resembling the tail of a fish.
Straight Pipes: Straight pipe Harley exhausts exit the rear of the bike with a simple pipe without any flair.
Is a Tuner Required When Installing an Aftermarket Harley Davidson Exhaust System?
It is generally recommended to use a tuner when installing a new aftermarket Harley Davidson exhaust system on your bike. The exhaust system directly affects the performance of your bike, and the engine’s onboard computer, its electronic control module (ECM), needs to be re-calibrated to work with the new exhaust. The ECM controls your bike’s air/fuel ratio, ignition timing, and other functions that impact engine performance
Are There any State or Local Laws That I need to Be Aware of When Installing a New Harley Davidson Exhaust?
Yes, the California Air Resources Board (CARB) has strict laws regarding vehicle emissions and exhaust systems. You may need to ensure that any new exhaust system installed on your vehicle is CARB compliant and has been issued an Executive Order (EO) number by CARB. Failure to comply with these laws can result in fines and other penalties. We recommended checking any local laws and regulations where you live as well. Currently, we do not sell exhaust systems in the state of California.