Fabrication Parts

V-Twin - 51-0979 - Frame Swingarm ChromeDescriptionChrome frame swingarm.Order pivot kit separately. The width of the inner diameter where the axle goes measures 9-7/8". From the cente rof the axle hole to the rear measures 14-1/2". *NOTE: May have...

V-Twin - 51-0972 - Frame Swingarm with Raw FinishDescriptionRaw frame swingarm features forged axle plates for 3/4" axle with round tube construction. Fits:FX 1971-1972FL 1958-1972Additional Information OEM No.47500-58B UOM1 - EA FinishRaw ...

V-Twin - 51-0971 - Swingarm Pivot Bolt Set Hex ChromeDescriptionSwingarm pivot chrome hex bolt set. Fits:FLST 1986-1999FXST 1986-1999Additional Information OEM No.4961 UOM1 - SET ManufacturerGardner-Westcott OriginUSA 2025 Catalog Pages303

V-Twin - 51-0907 - Frame Swingarm with Chrome FinishDescriptionRear frame swingarm is chrome and is for 4-speed rear chain drive models. Bearings and races are not included.Measures 12.5" from center of shock bolt to center of swingarm pin and 12.50"...

V-Twin - 51-0898 - Black Rear Frame SwingarmDescriptionRear frame swingarm is black and is for 4-speed rear chain drive models. Bearings and races are not included.Measures 12.250" from center of shock bolt to center of swingarm pin and 12.50" from the...

V-Twin - 51-0783 - Dropped Swingarm RawDescriptionRaw finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle. Axle slots are 3/4", for disc brake applications. Swingarm is for use with...

V-Twin - 51-0767 - Dropped Swingarm ChromeDescriptionChrome finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle. Axle slots are 3/4", for disc brake applications.Lowers bike 1/2" and...

V-Twin - 51-0467 - 45 inch Transmission and Motor Base Forging Set RawDescription45" transmission and motor base forging set holds transmission and connects center post and front down tube.2 pieces welded as an assembly. Fits:W 1936-1952Additional...

V-Twin - 51-0458 - 45 Front Control Rod Forging RawDescription45 front control rod forging features a raw finish.Braze on to front down tube to support brake and clutch strap, and jiffy stand on the left side. Fits:W 1936-1952Additional Information UOM1...

V-Twin - 51-0456 - Rear Frame Axle Plate SetDescriptionRear frame right and left axle plates with oiled raw steel finish for 45 solo frames, constructed of forged steel.Must be welded in place. ...

V-Twin - 51-0431 - 45 inch Frame Seat Post ForgingDescriptionThis top frame part is machined to accept rear tube, center seat post tube and upper and lower gas tank tubes.Brace has threaded holes for the rear fender and battery box. ...

V-Twin - 50-1544 - Oval Right Side Chrome Tool BoxDescriptionReplica chrome right side oval tool box includes keys and features round style barrel key set!Features round style barrel key set! Order mount hardware separately. Fits:FL 1941-1957EL...

V-Twin - 50-1543 - Black 45 Tool Box KitDescriptionTool box kit is for 45 models with two keys included. Kit also features a black tool box, zinc plated bracket and mount kit. Bracket is bolt on installation. Fits:W 1941-1952Additional Information UOM1...

V-Twin - 50-1538 - 45 Tool Box KitDescriptionTool Box kit is for 45 models with two keys included. Kit also features chrome tool box, zinc plated bracket, and mount kit. Bracket is bolt on installation. Fits:W 1941-1952Additional Information UOM1 - KIT ...

Drag Specialties - DS391357 - Flat Side Tank Custom Bolt KitFeaturesChrome-plated hardware replaces front OEM gas tank mounting boltsIncludes four 5/16" -18 x 3/4" flathead Allen bolts with recessed washersSpecsColor/FinishChromeTypeFuel TankProduct...

Drag Specialties - DS305005 - Replacement Rubber grommetsFeaturesA step beyond individual headbolt covers and spark plug coversDrag and Billy Westbrook have teamed up to put an end to having to buy individual parts; our die-cast aluminum covers fit over...

Drag Specialties - DS305003 - Bolt Covers - Chrome - 80"FeaturesA step beyond individual headbolt covers and spark plug coversDrag and Billy Westbrook have teamed up to put an end to having to buy individual parts; our die-cast aluminum covers fit over...

Drag Specialties - DS290605 - Chrome Plug for Handlebar ClampsFeaturesPlugs fit any socket-head screw with 1/4" hexSold each to consumer; sold to dealer in packs of 12SpecsBase FinishChromeMaterialAluminumTypeClampTypeHandlebarBase ColorSilverRiding...

Drag Specialties - DS289062 - Air Cleaner Support Bracket Kit - '88-'06 SportsterFeaturesCan be used in conjunction with most breather kits (where applicable)All gaskets and mounting hardware includedBreather kits/bolts sold separatelyMount to the...

Drag Specialties - DS273898 - Pivot Pin/Clip - Lever - Single - ChromeFeaturesReplacement pin kitReplacement Part for OEM Number(s):11143,4503282SpecsBase FinishChromeMaterialAluminumBase ColorSilverColor/FinishChromeRiding StyleStreetProduct...

Drag Specialties - DS272153 - Rocker Switch - Universal - ChromeFeaturesReplacement switchReplacement Part for OEM Number(s):7148372SpecsProduct NameSwitchSwitch ActuationRockerColor/FinishChromeUnitsEachRiding StyleStreetTypeUniversalFitment1978-1980...

Drag Specialties - DS272141 - Handlebar Switch Button Caps - Horn/Start - Short - BlackFeaturesMade of molded plasticSold each to consumer; sold to dealers in 10-packReplacement Part for OEM Number(s):7153472SpecsProduct NameSwitch Cap KitSwitch...

Drag Specialties - DS272138 - Rocker Switch - Hi/Lo - BlackFeaturesReplacement switchReplacement Part for OEM Number(s):7154675SpecsColor/FinishBlackTypeHigh/LowSwitch ActuationRockerProduct NameSwitchRiding StyleStreetUnitsEachFitment1978-1980...

Drag Specialties - DS243840 - Speedometer Drive Cover - Chrome - FLFeaturesPerfect for detailing your front endChrome stamped steelSpecsApplicationSpeedometerMaterialSteelTypeSpeed SensorColor/FinishChromeProduct NameCoverRiding...

Drag Specialties - DS222800 - Neck Post Bearing CupFeaturesChrome Timken-type bearing cupsReplacement Part for OEM Number(s):4831160SpecsRiding StyleStreetModelNeck PostTypeSteering StemColor/FinishChromeProduct NameBearing CupUnitsPairFitment1965-1969,...

Drag Specialties - DS195157 - Oil Deflector Plate - Harley DavidsonFeaturesAvailable for Hitachi or Prestolite starter motorsFits chain drivesReplacement Part for OEM Number(s):6051665ASpecsRiding StyleStreetTypeOilUnitsEachProduct NameDeflector...

Drag Specialties - DS193047 - Cable Tie - 7" - Chrome - 10-PackFeaturesElectro-plated color resists discoloration under repeated bendingSpecsProduct NameCable TieBase FinishChromeUnits10 PackBase ColorSilverMeasurement SystemSAELength Imperial7''Riding...

Drag Specialties - DS193048 - Cable Tie- 4" - Chrome - 10-PackFeaturesElectro-plated color resists discoloration under repeated bendingSpecsProduct NameCable TieBase FinishChromeUnits10 PackColor/FinishElectro PlatedBase ColorSilverMeasurement...

Drag Specialties - DS192383 - Washer - USS - 5/16"FeaturesWashers have an outside diameter approximately 1/64" larger than the assembly boltMade in the U.S.A.SpecsUnits25 PackBase FinishChromeProduct NameWasherMeasurement SystemSAEOutside Diameter...

Drag Specialties - DS192395 - Thick Washer - 5/16"FeaturesWashers designed for custom applications where a desired inner diameter and outer diameter and thickness are requiredMade in U.S.A.SpecsInside Diameter Imperial7/16''Thickness Imperial5/16''Riding...

Drag Specialties - DS192393 - Thick Washer - 1/8"FeaturesWashers designed for custom applications where a desired inner diameter and outer diameter and thickness are requiredMade in U.S.A.SpecsApplicationMulti FunctionalBase ColorSilverOutside Diameter...

Drag Specialties - DS192391 - Thick Washer - 1/16"FeaturesWashers designed for custom applications where a desired inner diameter and outer diameter and thickness are requiredMade in U.S.A.SpecsBase ColorSilverProduct...

Drag Specialties - DS192394 - Thick Washer - 5/64"FeaturesWashers designed for custom applications where a desired inner diameter and outer diameter and thickness are requiredMade in U.S.A.SpecsOutside Diameter Imperial1''Base FinishChromeThickness...

Drag Specialties - DS192390 - Thick Washer - 5/64"FeaturesWashers designed for custom applications where a desired inner diameter and outer diameter and thickness are requiredMade in U.S.A.SpecsInside Diameter Imperial15/32''Measurement SystemSAERiding...

Drag Specialties - DS192387 - Thick Washer - 1/8"FeaturesWashers designed for custom applications where a desired inner diameter and outer diameter and thickness are requiredMade in U.S.A.SpecsBase ColorSilverThickness Imperial1/8''Measurement...

Drag Specialties - DS192386 - Washer - USS - 1/2"FeaturesWashers have an outside diameter approximately 1/64" larger than the assembly boltMade in the U.S.A.SpecsBase FinishChromeTypeUSSUnits25 PackApplicationMulti FunctionalMeasurement SystemSAERiding...

Drag Specialties - DS192385 - Washer - USS - 7/16"FeaturesWashers have an outside diameter approximately 1/64" larger than the assembly boltMade in the U.S.A.SpecsUnits25 PackOutside Diameter Imperial7/16''Riding StyleStreetBase...

Drag Specialties - DS192381 - Washer - USS - #10FeaturesWashers have an outside diameter approximately 1/64" larger than the assembly boltMade in the U.S.A.SpecsBase FinishChromeTypeUSSApplicationMulti FunctionalUnits25 PackBase ColorSilverOutside...

Drag Specialties - DS192382 - Washer - USS - 1/4"FeaturesWashers have an outside diameter approximately 1/64" larger than the assembly boltMade in the U.S.A.SpecsMeasurement SystemSAERiding StyleStreetBase ColorSilverProduct NameWasherBase...

Drag Specialties - DS192384 - Washer - USS - 3/8"FeaturesWashers have an outside diameter approximately 1/64" larger than the assembly boltMade in the U.S.A.SpecsTypeUSSProduct NameWasherMeasurement SystemSAERiding StyleStreetOutside Diameter...