Sportster Parts

Performance Machine - Throttle Housing fits Dual Thread-In Cables Features: For 1" handlebars Made in the U.S.A. Fitment 1995 Harley-Davidson Dyna Convertible FXDS-CONV - - 1995 Harley-Davidson Super Glide...

V-Twin - Volt Tech Starter Drive fits Big Twin Models (OEM #31443-65A) Volt Tech starter drive features a high strength five roller clutch, stainless steel springs, hardened ramped clutch receivers, premium bronze bushing and factory pre-lubing...

V-Twin - EFI Replacement Fuel Pump Kit fits '07-'17 Sportster Model (OEM #75305-07A) Each kit is a direct replacement for the OEM pump and includes pump hose and hardware. Note: Pump is to replace pump unit on OEM assemblies Fitment: XL...

V-Twin - Chrome Handlebar Control Kit 5/8" Bore Master Cylinder fits '84-'95 FX/XL & FXR Models Features: Chrome handlebar control kit, 3/4" bore, includes master cylinder, clutch handle with clamps, and two pairs of switch housings Master...

V-Twin - 35mm Fork Tube Set 23-3/8" fits '87 FXR, '86-'08 Sportster Models (OEM #45407-86) - Chrome Features: Fork tube set has stock length of 23-3/8" Before installing, compare new and old tubes Be sure the stock top plugs it into the new fork...

V-Twin - 23-1/2" Hard Chrome 35mm Fork Tube Set fits '73-'74 Sportster & FX Model Features: This fork tube set is stock 35mm diameter X 23-1/2" long Before installing, compare new and old tubes Be sure the stock top plugs fit into the new fork...

V-Twin - Chrome 35mm Fork Tube w/ 23-1/2" Length fits '73-'77 FX, '73-'74 Sportster Models (OEM #45977-73) Fork tube set is 23-1/2" stock length, Before installing, compare new and old tubes. Be sure the stock top plug threads into the new fork...

V-Twin - Chrome 35mm Fork Tube w/ 25-1/4" Length fits '75-'83 XLCH, '79-'82 XLS, '77-'83 FXS Models (OEM #45644-77) Fork tube set is 2" over stock length for XLH, XLXH, XLCR, 1983 XLX, XLS models and stock length for 1979-1982 XLS models. Before...

V-Twin - 23-1/4" Hard Chrome 35mm Fork Tube Set fits '76-'83 FX, '75-'83 XLCH/XLH Models Features: Hard chrome fork tubes are Showa type with a stock length of 23-1/4" Before installing, compare new and old tubes. Be sure the stock top plugs it into...

Burly Brand - 16" Complete Black Vinyl Handlebar Cable/Line Kit for Ape Hanger Handlebars fits '14-'22 Sportster Models (W/O ABS (Except Rh Sportster)) Features: Complete installation kit for Burly Ape hangers Kit includes extended brake line...

Colony - Magneto Ground Terminal Assembly for '58-'69 XLCH Features: Magneto ground terminal assembly Fitment: 1958-1969 Harley-Davidson Sportster 900 XLCH - -

Colony - Motor Bolt Kit fits '04-'22 Sportster Models (Except RH Sportster) Features: Made in the U.S.A. Fitment 2006 Harley-Davidson 1200 Low XLL - - 2006 Harley-Davidson 883 Low EFI XLL - - 2006 Harley-Davidson 1200...

Colony - Motor Mount Hardware Kit for '84-'99 FXST/​FLST Features: Made in the U.S.A. Replacement Part for OEM: 3512 4416 4716W 4726 6019 Fitment 1999 Harley-Davidson Softail Night Train FXSTB - - 1997-1999 Harley-Davidson Softail Heritage...

Colony - Rear Caliper Bolt Kit fits '00-'07 Big Twin (Except '06-'07 FXST), '00-'03 Sportster Models (OEM #44177-00) Features: Made in the U.S.A. Fitment 2007 Harley-Davidson Low Rider EFI FXDL - - 2007 Harley-Davidson Electra...

Colony - Front Wheel Spacer Kit fits '08-'13 Sportster Models (OEM #43358-08, 43522-08) Features: Kit includes polished/chrome-plated finish spacers, nuts and machined washers Made in the U.S.A...

Colony - Transmission Mainshaft Nut fits '92-'99 Evolution Big Twin Models (OEM #35211-91A/B) Features: 1-1/2" left-hand threads Made in the U.S.A. Fitment 2012-2015 Harley-Davidson Seventy-Two...

Colony - 8768-3 Axle Nut/Washer Kit fits '86-'91 Sportster; 5/8”-18 Thread (OEM #6653, 7038, 7813) - Chrome Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4" axles Quality reproduction of original...

Colony - 8160-4 Rear Axle Nut Kit fits '46-'71 Big Twin & '57-'72 Sportster Models (OEM #41596-30, 41603-32) - Chrome Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4" axles Quality reproduction of original...

Colony - Complete Stock Hardware Kit fits '57-'66 Sportster Models Features: Kit includes all stock motor nuts, bolts, washers and studs All hardware meets or exceeds original H-D specifications Made in the U.S.A...

Colony - Throttle/Spark Handlebar Plunger fits '54-'73 Big Twin & '57-'73 Sportster Models (OEM #56400-53) Features: Reproduction of the throttle and spark plunger Includes one plunger and one set screw Made in the...

Colony - Zinc Speedometer Cable Clamp fits '61-'80 Big Twin, '61-'80 Sportster Models (OEM #67074-57A) Features: Complete reproduction of original H-D clamps Made in the U.S.A. Fitment 1980 Harley-Davidson Electra Glide Sport...

Colony - Jiffy Stand Pin and Screw Kit fits '57-'84 Sportster Models (OEM #1760B, 50090-53) Features: Replaces Jiffy stand pin and screw Made in the U.S.A. Fitment 1983-1984 Harley-Davidson Sportster 1000...

Colony - Front Brake Cable Adjuster fits '50-'65 Big Twin, '57-'72 Sportster Models (OEM #45159-50) - Cadmium Features: Duplicate of original front brake cable adjuster Made in the U.S.A. Fitment 1972 Harley-Davidson Sportster 1000...

Colony - Cable Sleeve Adjuster fits '53-'56 Big Twin, 'E57-'71 Sportster Models (OEM #38654-53) Features: Original clutch cable adjusting sleeve reproduction Made in the U.S.A. Fitment 1958-1971 Harley-Davidson Sportster 900...

Colony - Generator Post Screw Kit fits '58-'69 Big Twin & '58-'78 Sportster Models (OEM #2690W, 31098-58) Features: Kit includes two screws, two insulating bushings, two fiber washers, two lock washers, and two nuts Made in the U.S.A...

Colony - 7621-1 Upper Chrome Fork Tube Cap fits '71-'72 FX & '52-'72 Sportster Models - Custom Features: Made in the U.S.A. Fitment 1972 Harley-Davidson Sportster 1000 XLH - - 1972 Harley-Davidson Sportster 1000...

Colony - Fork Tube Spring Retainer and Pin Wrench Kit fits '71-'72 FX, '52-'72 Sportster Models (OEM #46243-68) Features: Includes pin wrench and two retainers Retainers are available separately Made in the U.S.A...

Colony - Stem Bolt and Cover Kit fits '57-'78 Sportster Models (OEM #457, 45721-54) Features: Kit includes sleeve, stem bolt, dust shield, spacer, rubber plug, and chrome cover Made in the U.S.A...

Colony - 8881-18 Chrome Rear Fender Mount Kit fits '59-'78 Sportster Models (OEM #2272, 4362) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock...

Colony - Rear Brake Pivot Kit fits '52-'72 Sportster Models (OEM #41730-52, 41876-54, 41882-52) - Cadmium Features: Includes one pivot stud, one locating block, one nut, and one lockwasher Made in the U.S.A...

Colony - 8936-3 Chrome Pivot Belt and Spacer fits '73-'78 Sportster Models (OEM #41730-73, 41882-73, 41883-73) Features: Includes one pivot bolt, one washer, and one spacer Made in the U.S.A. Fitment 1977-1978 Harley-Davidson Sportster...

Colony - Rear Brake Pivot Stud fits '73-'78 Sportster Models (OEM #41876-73) Features: Made in the U.S.A. Fitment 1977-1978 Harley-Davidson Sportster 1000 XLT - - 1973-1978 Harley-Davidson Sportster 1000...

Colony - 9899-1 Cadmium Spring Stud Starter fits '52-'70 Sportster Models (OEM #33088-52) Features: Quality reproduction of the original part Made in the U.S.A. Fitment 1958-1970 Harley-Davidson Sportster 900...

Colony - Speedometer Drive Block-Off Plug for '52-'72 Sportster Models Features: Used for custom applications when stock speedometer and cable are removed Includes nylon plastic seal/washer Made in the U.S.A...

Colony - 3181-5 Zinc-Plated Kick Stand Pin Kit (OEM #554A) Features: Reproduction of OEM 554A clip used on many 89 and up H-D kickstands Fitment 2020 Harley-Davidson Softail Low Rider S FXLRS - - 2019-2020 Harley-Davidson FXDR...

Colony - Gas Tank Restoration Spacers fits '57-'72 K Sportster Models (OEM #61135-47) Features: OEM replacement spacers Fitment 1972 Harley-Davidson Sportster 750 XR - - 1972 Harley-Davidson Sportster 1000...

Colony - Restoration Spacers fits '52-'82 K Sportster Models (OEM #61135-52A) Features: OEM replacement spacers Fitment 1979-1981 Harley-Davidson Roadster 1000 XLS - - 1977-1979 Harley-Davidson Café Racer...

Colony - Rocker End Cap fits '71-'85 Sportster Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special...

Colony - 11/16"-16 Crankcase/Oil Tank Hex Timing Plug fits '86-'95 Sportster Models (OEM #2326-38) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug holes Fitment 2000 Harley-Davidson FXR...

Colony - 12-Point Head Bolt Sets fits '57-'85 Sportster Models (OEM #4709) Features: Individual chrome bolt and nut sets for specific applications Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000...