Shop By Motorcycle

James Gasket - Foamet® Primary Cover Gasket fits '04-'22 Sportster Models (Except RH Sportster (OEM #34955-04)) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in...

James Gasket - Engine Inner Primary Seal fits '17-'23 M-Eight Models (OEM #256004-55, 257004-55) Features: Made in the U.S.A. Fitment 2020 Harley-Davidson Road Glide Limited FLTRK - - 2020 Harley-Davidson Softail Low Rider S...

James Gasket - Primary Cover Gasket fits '17-'23 Touring Models (OEM #257003-78) Features: Replacement Engine Gasket Fitment 2020, 2022 Harley-Davidson Road Glide Limited...

James Gasket - Primary Cover Gasket fits '06-'16 FLT, '07-'17 Softail/Dyna Models (OEM #34934-06) Features: Top quality gasket Made in the USA Fitment 2016-2017 Harley-Davidson Fat Boy S...

James Gasket - Primary Cover Gasket fits '67-'76 Sportster Models (OEM #34955-67, 34955-67A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Cover Gasket fits '86-'90 Sportster Models (OEM #34955-75) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Cover Gasket fits '91-'03 Sportster Models (OEM #34955-89) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models (Gaskets, Seals and O-Rings) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the USA Note: Seals not...

James Gasket - Primary Gasket fits '05-'06 Touring Models w/ Foamet® Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Gasket fits '89-'93 Softail & Dyna Glide Models w/ Foamet® Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone...

James Gasket - Primary Cover Gasket fits '99-'06 FLT Model (OEM #34901-94) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Cover Gasket fits '00-'06 Softail, '99-'05 Dyna Models (OEM #60539-94) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Gasket Kit fits '84-'86 Touring & '84-'88 Softail Models w/ Silicone Bead Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

Jims - 8385 Compensator Nut Retainer fits '12-'13 Twin Cam & Screamin’ Eagle Models (OEM #83935-09A, 40274-08A) Features: Lockplate secures nut into sprocket retainer Incorporated lock tab One piece sprocket retainer for strength Made in...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 967-4 Installation/Removal Inner Primary Bearing Tool fits '07-'20 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also...

Jims - 967-5 Inner Primary Bearing Tool fits '07-'19 Big Twin & '06 Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also removes and installs...

Jims - 5534 Compensator Bolt Driver Torx Socket fits '14-'21 Big Twin Models Features: Correct-style driver/socket for the compensating sprocket retaining fastener Made in the USA For use with Jim's part# 10500031 compensator bolt...

Jims - 967 Inner Primary Bearing and Seal Remover/Installer Tool fits 'L84-'06 FXST/​FLST & '85-'06 Touring & Dyna Models Features: Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer...

Jims - 1168 Primary Cover Inspection Plug Tool fits '57-'90 Sportster Models Features: Use this tool to remove and install primary inspection plug Made in the USA

Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...

Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor cases Made in the U.S.A...

Jims - 94547-80B Sprocket Shaft Bearing Race Tool fits '77-'03 Sportster, '94-'02 Buell Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor...

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing Made in the U.S.A...

Jims - 97081-54 Sprocket Shaft Bearing Press Tool fits '55-'76 Sportster Models Features: Use on '55-'76 XL and K models to install the flywheel assembly into the left crankcase Timken® bearing Optional sleeves sold separately for use on '86-'03...

Belt Drives Ltd. - 2" Drive Belt fits '00-'06 FXST/​FLST Models Features: Ball-bearing lockup clutch provides approximately 60% more surface contact area than the stock clutch for smooth, sure power transfer Kit includes motor plate, starter...

Belt Drives Ltd. - 2" Drive Belt fits '07-'17 Softail w/ Mechanical Clutch (Except FXSB/SE, FXCW/C) & '06-'17 Dyna w/ Forward Controls Features: Ball-bearing lockup clutch provides approximately 60% more surface contact area than the stock clutch...

Belt Drives Ltd. - 2" Drive Belt fits '07-'16 FLHR, '07-'13 FLHT/​FLTR w/ Mechanical Clutch Features: Includes BDL's ball-bearing lockup clutch, new full-coverage side guard and top mesh belt guard Kit also includes motor plate and a 132-tooth...

Belt Drives Ltd. - 1-5/8" Belt Drive fits '99-'06 FLT/​FLHT/​FLHR/​FLHX/​FLTR Models Features: 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of two half plates, four full plates and five steel drive...

Belt Drives Ltd. - 3" Belt Drive fits '00-'06 FXST/​FLST Models Features: 3" electric start kits include front pulley, belt, clutch hub and clutch basket and aramid clutch set (consists of two half plates, four full plates and five steel drive...

Belt Drives Ltd. - 3" Electric Start 8mm Belt Drive with Lock-Up Clutch fits '86-'89 FXST/​FLST Models Features: 3" electric start kits include front pulley, belt, clutch hub and clutch basket and aramid clutch set (consists of two half plates, four...

Belt Drives Ltd. - 2" SS Belt Drive Without Cover fits '00-'06 FXST/​FLST Models Features: Beautiful styling and awesome performance 2" drive features a one-piece billet motor plate Clutch design eliminates clutch dogs and features an internal...

Belt Drives Ltd. - 2" Drive Belt fits '99-'06 FLHT/​FLHR/​FLTR/​FLHX Models Features: Includes BDL's ball-bearing lockup clutch, new full-coverage side guard and top mesh belt guard Kit also includes motor plate and a 132-tooth belt 2" drive width...

Belt Drives Ltd. - " Electric Start 8mm Belt Drive with Lock-Up fits '99-'05 Dyna Glide Models Features: Direct bolt-in applications All systems come with the Quiet Clutch and ball-bearing lockup design pressure plate Lockup design applies extra...

Belt Drives Ltd. - 1-5/8" Belt Drive Kit fits '00-'06 FXST/​FLST & '99-'05 Dyna Models Features: 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of two half plates, four full plates and five steel...

Belt Drives Ltd. - 2" Black Drive Belt fits '00-'06 FXST/​FLST Models Features: Use BDL's ball-bearing lockup clutch for positive clutch engagement and ease of shifting Kit includes a aramid 142-tooth drive belt, motor plate, starter housing and...

Belt Drives Ltd. - 2.75" Drive Belt fits '07-'17 Softail with Mechanical Clutch (Except FXSB/SE, FXCW/C) & '06-'17 Dyna w/ Forward Controls Features: Feature BDL's ball-bearing lockup clutch with ring gear Kit includes motor plate, 52-tooth...