Shop

Two Brothers Racing - Comp-S Gen2 Exhaust System fits '18-Up M8 Softail FLSB and FLHC Models This state-of-the-art exhaust system is available in your choice of a brushed, black, or polished finish. Please Note: Photo is for reference only, this...

Two Brothers Racing - Sportster S Fender Eliminator Kit w/ License Plate Light fits '21 Sportster S Models This new eliminator kit will move your license plate, tail light and turn signals up under the fender for a cleaner, sleeker look...

V-Twin - 12-Volt Wiring Outlet Receptacle Box This is a wiring outlet receptacle box designed for 12-volt cell phones, MP3 players or lighters. Features Unit has a 90-centimeter rubber-coated cable with a 10-amp capacity. Fitment Custom...

1200cc XL Conversion cylinder and piston set includes 2 silver finished with milled edge fin cylinders with fitted Wiseco moly 9.5:1 reverse dome piston ring set. Order head base gasket separately. Fits: XL 2004- Up Measurements  Piston...

V-Twin - 7" Headlamp Bracket fits '04 & Up Touring Models This headlamp bracket is designed for 7"-style headlamp units and has a smooth black finish. NOTE: This bracket is required for use with 33-1044 black 7" LED Headlamp Unit W/ Turn Signal for...

V-Twin - Black 7" LED Headlamp Unit W/ Turn Signal fits '94-'13 Touring Models This unit comes with an LED turn signal ring. NOTES: Requires 31-0080 mounting bracket for installation on 1999-2013 FLT models (See 'Also Bought' tab). Do not touch any...

V-Twin - Black Alloy Racer Style Footpeg Set These are adjustable male end mount footpegs that have a racer design and alloy construction with a black finish. Features Can be made offset or inline because the mounting block is adjustable...

V-Twin - Black One Piece Rigid Mount Sissy Bar fits '18 & Up M8 Models V-Twin's One Piece  Rigid Mount Sissy Bar has a steel upright which is welded to the rigid mount side plates. The bar bolts directly to the fender struts for a narrow...

V-Twin - Black Top Engine Mount Stabilizer fits '92-'04 Dyna Models V-Twin's Black Finish Top Motor Mount Stabilizer Kit comes with adjustable stabilizer links and all necessary hardware to ensure a hassle-free installation. The rubber isolated links...

V-Twin - Black Vinyl Solo Seat The V-Twin Black Vinyl Solo Seat features a metal base plate that comes with studs for mounting springs and nose brackets. The space between the studs measures 3.137" and the center-to-center measurement of the studs are 3...

V-Twin - Brass Sand 1" Pullback Riser Set V-Twin's brass sand riser set is designed to be used with 1" handlebars. It has a smooth casting polished finish. Fitment Custom application

V-Twin - Chrome Alloy Racer Style Footpeg These are adjustable male end mount footpegs that have a racer design and alloy construction with a chrome finish. Features Can be made offset or inline because the mounting block is adjustable...

V-Twin Chrome Flush Mount Front Axle Kit Fits Harley 1984-1999 FL Models This flush mount front axle kit is a new way to dress up your front wheel without the hex nut and lug sticking out. Axle has a 8-7/8" bearing surface length includes end cap...

V-Twin Mfg. Chrome Rear Calipers Fits Harley-Davidson 87-99 FLST/FXST, 91-99 FXD, 87-99 XL, L87-94 FXR Models This caliper set by V-Twin Manufacturing is fully assembled with a piston, seal, and brake pads. Mounting hardware is not included in this...

V-Twin Mfg. Chrome Rear Calipers Fits Harley-Davidson 00-05 FXST, 00-07 FLST Models This caliper set by V-Twin Manufacturing is fully assembled with pistons and seals for stock replacement. OEM Part Number: 44539-02A Fitment: Harley-Davidson...

V-Twin Mfg. Chrome Rear Calipers Fits Harley-Davidson 06-07 FXD/FXDWG This caliper set by V-Twin Manufacturing is fully assembled with pistons and seal. This caliper has a 1" hole and uses the stock mount. OEM Part...

V-Twin Mfg. Chrome Rear Calipers Fits Harley-Davidson 06-07 FXST/FLST This caliper set by V-Twin Manufacturing is fully assembled with pistons and seal. This caliper uses the stock mount brackets for installation. Bracket is not included. OEM Part...

V-Twin - Chrome Round Headlamp V-Twin's chrome round headlamp features a 60/55 watt H4 bulb with a visor and grooves. It also features buffalo style housing! It comes with an insulator to cover wire connectors. NOTE: For show use only, not DOT approved...

V-Twin - Chrome Top Engine Mount Stabilizer fits '05-'17 Dyna Models V-Twin's Chrome Finish Top Motor Mount Stabilizer Kit comes with adjustable stabilizer links and all necessary hardware to ensure a hassle-free installation. The rubber isolated links...

V-Twin Dual LED Headlamp - fits '04-'13 FLTR Features Dual unit includes two LED daylight headlamps mounted onto a backing plate for easy installation features a chrome or black finish housing with chrome or black shaded reflector. Assembly is...

V-Twin - Gloss Black Docking Hardware Kit fits '18 & Up M8 Softail Models V-Twin's Gloss Black Docking Hardware Kit comes complete with all of the necessary hardware to install the detachable accessories, along with docking points for sissy bars and...

V-Twin - Green Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original.  

V-Twin Left-Side Front Caliper Fits Harley-Davidson 84-99 FXST/FLT/XL, 86-99 FLST, 91-99 FXR/FXD Models This kit includes left-side front caliper with all internal components and brake pads. For use with a 11.5" disc. Available in a black or chrome...

V-Twin - Motor Mount Kit - Fits EL '36-'40 FL '41-'69 V-Twin Upper and lower motor mount bolt kit is available in chrome, cadmium, or a parkerized finish. FitmentEL 1936-1940FL 1941-1969

V-Twin - Polished Alloy Racer Style Footpeg Set fits '80 & Up FX and '86 & Up Sportster Models These are adjustable male end mount footpegs that have a racer design and alloy construction with a polished finish. NOTE: These will not fit 2018...

V-Twin Rear Brake Caliper Bracket Fits Harley-Davidson 06-07 FXST/FLST/FLSTS Models This V-Twin Manufacturing Rear Brake Caliper Bracket replaces the stock unit to accept stock calipers. This kit fits Harley-Davidson 2006-07 FXST/FLST/FLSTS Models. OEM...

V-Twin Rear Brake Caliper Bracket Fits Harley-Davidson 87-94 FXR Models This V-Twin Manufacturing Rear Brake Caliper Bracket replaces the stock unit to accept stock calipers. This kit fits 1987 to 1994 FXR Models. OEM Part...

V-Twin Mfg. Rear Brake Master Cylinder Fits Harley-Davidson 87-99 FLST/FLSTF Models Replaces OEM part number 42468-87D. Chrome rear 5/8" bore remote mount master cylinder with piston rod. The mounting bolt hole distance, center to center, measures...

V-Twin Right-Side Front Caliper Fits Harley-Davidson 84-99 FLT, 88-99 FXSTS Models This kit includes right-side front caliper with all internal components and brake pads. OEM Part Number: 44023-83C Fitment: Harley-Davidson FXSTS...

V-Twin - Stainless Steel 1" Pullback Riser Set V-Twin's stainless steel riser set is designed to be used with 1" handlebars. It has a smooth casting polished finish. Fitment Custom application

V-Twin - York FXR Rear Chain Drive Kit fits '83-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth rear steel sprockets with a 120-link gold seal chain. It features a...

V-Twin - York Rear Chain Conversion Kit fits '08 Touring Models V-Twin's transmission sprocket conversion kit is used to convert belt drive models to chain drive models. It comes with a 22-tooth front sprocket and a 48-tooth rear sprocket to achieve...

V-Twin - York Rear Chain Conversion Kit fits ''17-'23 Touring Models V-Twin's transmission sprocket conversion kit is used to convert belt drive models to chain drive models. It comes with a 24-tooth front sprocket and a 51-tooth rear sprocket to...

V-Twin 6" Fuel Sight Tub This is a 6" long fuel sight tube unit. It must have steel dowels welded into place prior to tank surface finishing. Fitment Fits all models.

Vance & Hines - Big Shots Staggered and Long Systems - Chrome fits '12-'16 FXS, FLS, FLST Models NOTE: Will not fit models with kickstarts. Features Feature the revolutionary Power Chamber™ design; a unique cross-over system that increases...

Vance and Hines Big Shots Exhaust Systems: Feature the revolutionary Power Chamber™ design; a unique cross-over system that increases horsepower and torque Armed with full-coverage 21/2" heat shields that are essentially blue-proof for...

Vance & Hines - Stainless Steel Muffler fits '21 HO-450 Pan-Am Models This muffler brings a huge increase in horsepower and torque compared to your bike's stock Revolution Max exhaust system and simultaneously decreases the overall weight of the...

Vance & Hines Straightshots  The Straightshots have a dual layout with a full length one-piece heatshield to give your Softail a clean and seamless style Features: Classic staggered drag pipe styling Full-coverage heat shields Available...

Vance & Hines 3" Eliminator 300 Slip-On Mufflers The 3" Eliminator 300 Mufflers are inspired by flat track racers and has an amazing sound. They are available in chrome or wrinkle black and will be a great addition to your Softail...

Vance & Hines Big Shots Staggered 2-into2 Exhaust System - fits '18-'19 FXBB/FXFB/FXLR/FLDE/FLHC/FLSB/FLSL Models Big Shots Staggered provide the best of both worlds, long and low 2-into-2 style pipes with 2-into-1 performance thanks to the Vance...