Softail Parts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Jims - 1288 Crankshaft Guide fits '99-'17 Twin Cam & '03-'09 Buell XB9R/X B9S Models
Jims
$52.95Jims - 1288 Crankshaft Guide fits '99-'17 Twin Cam & '03-'09 Buell XB9R/X B9S Models Features: Spreads the crankcase pinion bearing rollers when reassembling right side case to the flywheel assembly Made in the U.S.A...$52.95 -
Jims - 16-2320 M8 Primary Locking Tool fits '18-Up FLST/FXST Models
Jims
$59.90Jims - 16-2320 M8 Primary Locking Tool fits '18-Up FLST/FXST Models Jims primary locking tool is used to lock the primary for service work on M8 models. Fitment: FLST 2018-UP FXST 2018-UP$59.90 -
Out of stock
Jims - 1658 Transmission Shifter Shaft Sleeve Tool fits '06-'20 6-Speed H-D Cruise Drive Models
Jims
$85.95Jims - 1658 Transmission Shifter Shaft Sleeve Tool fits '06-'20 6-Speed H-D Cruise Drive Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use to install shifter shaft sleeve Made in the...$85.95 -
Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/FLHT/FXR, '84-'99 Big Twins & '84-'00 FLHT/FXR/FXD Models
Jims
$54.95Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/FLHT/FXR, '84-'99 Big Twins & '84-'00 FLHT/FXR/FXD Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use...$54.95 -
Out of stock
Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models
Jims
$275.95Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in...$275.95 -
Out of stock
Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R)
Jims
$183.95Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R) Features: Will position the seal evenly into the exhaust port of head Tool can be used with exhaust flange nuts Made...$183.95 -
Out of stock
Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models
Jims
$367.95Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...$367.95 -
Out of stock
Jims - 1710 Outer Race Snap Ring fits '69-'02 Big Twin Models
Jims
$150.95Jims - 1710 Outer Race Snap Ring fits '69-'02 Big Twin Models Features: Used for removing and installing the Timken® bearing outer race snap ring A must for replacing rings in OEM and aftermarket cases Made in the U.S.A...$150.95 -
Out of stock
Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models
Jims
$217.95Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case Can be used without removing transmission from the bike Made in the U.S.A...$217.95 -
Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser)
Jims
$108.95Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as install cups in the frame This tool pulls the races...$108.95 -
Out of stock
Jims - 1733 Mega Nut fits '07-'20 Big Twin & '06-'17 Dyna Models
Jims
$125.95Jims - 1733 Mega Nut fits '07-'20 Big Twin & '06-'17 Dyna Models Features: Includes machined clamping face tolerance, along with additional locking holes for a more precise and secure way to secure pulley nut Made in the U.S.A...$125.95 -
Jims - 1745 Bearing Simulator fits '70-'02 Big Twin Models
Jims
$107.95Jims - 1745 Bearing Simulator fits '70-'02 Big Twin Models Features: Designed to allow quick and easy removal and replacement of flywheel assembly in the left-side crankcase when checking rod-to-case, piston-to-flywheel or cylinder-to-flywheel...$107.95 -
Jims - 2043 41mm Fork Nut Socket fits '48-'17 Wide Glide Models
Jims
$98.95FLHRS Jims - 2043 41mm Fork Nut Socket fits '48-'17 Wide Glide Models Features: Eliminates possible burring of plug caused by wrenches Used to remove and install top fork-tube plug Fits 41 mm forks Made in the U.S.A...$98.95 -
Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models
Jims
$126.95Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...$126.95 -
Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames)
Jims
$130.95Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and installs steering head bearing race on 84-16 Big Twin...$130.95 -
Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models
Jims
$46.95Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models Features: Removes oil screen without removing exhaust Used to remove the tappet oil screen plug Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...$46.95 -
Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models
Jims
$73.95Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...$73.95 -
Out of stock
Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides)
Jims
$943.95Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides) Features: Adapters are supported by a stand that makes it easy to press valve guides in and out A special guide...$943.95 -
Jims - 2244 3/8" 35 mm Fork Nut Socket fits For Big Twin & Sportster Models
Jims
$124.95Jims - 2244 3/8" 35 mm Fork Nut Socket fits For Big Twin & Sportster Models Features: Used to remove and install top fork nuts on fork tubes Rubber protector inside socket Will clear most handlebars Made in the U.S.A...$124.95 -
Jims - 2246 Timken® Bearing Race Installer fits '69-'02 Big Twin, '77-'03 Sportster & '82-'02 Buell Models
$385.95Jims - 2246 Timken® Bearing Race Installer fits '69-'02 Big Twin, '77-'03 Sportster & '82-'02 Buell Models Features: Used to install bearing race straight into the left crankcase A must for late-model cases Made in the U.S.A...$385.95 -
Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive
Jims
$246.95Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut Made in the U.S.A...$246.95 -
Out of stock
Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models
Jims
$171.95Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings. Fitment 2006 Harley-Davidson Street...$171.95 -
Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels
Jims
$163.95Jims - 33071-73 Bearing Race Remover and Installer fits '73-'99 Big Twin, Sportster & Buell Wheels Features: Designed to remove and install bearing cups in cast wheels Use with JIMS® Handle Fitment 1999 Harley-Davidson Super...$163.95 -
Jims - 33443-84 Tappet Aligning Tool fits 'L76-'17 Big Twin Models (Except M-Eight)
Jims
$32.95Jims - 33443-84 Tappet Aligning Tool fits 'L76-'17 Big Twin Models (Except M-Eight) Features: Can also be used to align rocker box bases on Evolution head (requires two tools) Also used in Harley-Davidson® Twin Cam oil pump alignment...$32.95 -
Out of stock
Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models
Jims
$197.95Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models Features: This tool will install “Round Circlip” rings in one easy step without distorting ring, for the safest wrist pin retention...$197.95 -
Out of stock
Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84)
Jims
$82.95Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...$82.95 -
Out of stock
Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84)
Jims
$61.95Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...$61.95 -
Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models
Jims
$97.95Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a one-ton press Install...$97.95 -
Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models
Jims
$363.95Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...$363.95 -
Out of stock
Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models
Jims
$370.95Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models Features: Installs the main drive gear without removing the transmission Used to remove and install the main drive gear Made in the...$370.95 -
Jims - 38515-90 Clutch Spring Compressor fits '90-'97 Big Twin & '91-'03 Sportster Models
Jims
$177.95Jims - 38515-90 Clutch Spring Compressor fits '90-'97 Big Twin & '91-'03 Sportster Models Features: For '91-'03 XL applications, compressor nut must be used in conjunction with compressor tool Used to release clutch spring so retainer ring can...$177.95 -
Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models
Jims
$161.95Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models Features: Designed to press oil seal over sprocket shaft into case Made in the U.S.A. Fitment 2010 Harley-Davidson Street Glide Trike...$161.95 -
Out of stock
Jims - 5517 Removal/Installation Shifter Mechanism Sleeve Tool fits '06 Dyna & '07-'20 Big Twin w/ 6-Speed Cruise Drive Transmission
Jims
$128.95Jims - 5517 Removal/Installation Shifter Mechanism Sleeve Tool fits '06 Dyna & '07-'20 Big Twin w/ 6-Speed Cruise Drive Transmission Features: A real time saver for removing and installing the shifter mechanism sleeve in cruise drive Big Twin...$128.95 -
Jims - 5530 Remote Fuel Tank fits H-D Models w/ Delphi Fuel Injection (Except V-Rod)
Jims
$490.95Jims - 5530 Remote Fuel Tank fits H-D Models w/ Delphi Fuel Injection (Except V-Rod) Features: Tank is completely mobile, even when pressurized; canister does not need to be continuously connected to the air supply Small enough to hang from a...$490.95 -
Out of stock
Jims - 5816 Cruise Drive Countershaft 1st Scissor Gear Alignment Tool fits '17-'20 M-Eight Models
Jims
$68.95Jims - Cruise Drive Countershaft 1st Scissor Gear Alignment Tool fits '17-'20 M-Eight Models Features: Essential for installing countershaft 1st scissor gear in cruise drive transmissions Ensures scissor gear teeth mesh correctly with the mainshaft...$68.95 -
Out of stock
Jims - 5820 Standard Rear Axle Installation Guide Tool fits '08-'21 Big Twin w/ Hollow 1” (25 mm)
Jims
$60.95Jims - 5820 Standard Rear Axle Installation Guide Tool fits '08-'21 Big Twin w/ Hollow 1” (25 mm) Features: Aligns wheel with swingarm, caliper brackets, wheel hubs and spacers Made in the USA For Big Twin models with hollow 1" (25 mm)...$60.95 -
Out of stock
Jims - 5831 Socket Fork Castle Nut fits '18-'20 FLSB/FXFB Models
Jims
$116.95Jims - 5831 Socket Fork Castle Nut fits '18-'20 FLSB/FXFB Models Features: Socket adapts wrench to remove castle nuts and access shock cylinder Made in USA Fitment 2019 Harley-Davidson FXDR...$116.95 -
Out of stock
Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models
Jims
$318.95Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...$318.95 -
Out of stock
Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool
Jims
$340.95Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...$340.95 -
Jims - 74437-96 Electronic Speedometer Sensor fits '00-'06 Softail Models (OEM #74430-00, 74430-00D, 74437-96)
Jims
$194.95Jims - 74437-96 Electronic Speedometer Sensor fits '00-'06 Softail Models (OEM #74430-00, 74430-00D, 74437-96) Features: Top-quality replacement sensor Also works on any aftermarket transmission case with a speedometer sensor hole Includes O-ring,...$194.95