Tools

Motion Pro - 08-0486 - Fork Seal Driver - Ringer® - 35-36 mmFeaturesDStempDStempLocking ring features knurled finish for secure no-slip grip and positively locks body halves together during useInnovative design makes tool easier and more secure to use...

Motion Pro - 08-0604 - Puller Tool - Dowel Pin - SetFeaturesPuller rod helps to remove slightly stuck pins, while slide hammer works on more difficult pinsKit includes 8 mm, 10 mm, 12 mm and 14 mm colletsIncludes tray for storage and...

Motion Pro - 08-0605 - Case Splitter V2FeaturesThis new tool from Motion Pro is the fastest and easiest to use case splitter ever devisedIncludes 5 mm, 6 mm and 8 mm threads on puller studs to fit various engine case sizesCaptured retaining collars in...

Performance Tool - W80575 - Pliers - Piston Ring - InstallerFeaturesInstalls and removes piston rings 3/64" to 1/4" thickComfortable vinyl grip handlesSpecsTypePiston Ring InstallerRiding StyleAdventure Touring / Dual-SportRiding StyleSnowRiding...

Motion Pro - 08-0472 - Deluxe Piston Pin Puller ToolFeaturesWorks on both full skirt and short skirt (slipper) pistonsFits all piston pins from 12 mm (1/2") to 24 mm (1")Non-marring aluminum pin adaptersInterchangeable piston adaptersSpecsRiding...

Motion Pro - 08-0538 - Truing-Balance Stand - Axis™FeaturesInnovative single-sided design allows easy access to spokes and nipples15 mm axle fits most modern street and dirt bikes and many mini bikesPrecision-built tool for building, truing and balancing...

La Choppers - LA-8525-00 - Shock Spring CompressorFeaturesSaves busted knuckles when changing out the shock springIncludes a plate for use with shocks that have a stud mountFor use with eyelet, clevis and stud-mount typesIdeal for use at the shop or the...

Lang Tools - CLT-4M - Tester Cylinder LeakageFeaturesTester with one 35 psi pressure gauge and one gauge with special multi-colored band for measuring low, moderate and high leakage, as well a scale that ranges from 0-100%M14 long-reach adapter, M10...

Lang Tools - TU310-PB - Compression TesterFeaturesMetal clip can be attached to the gauge, then the gauge can be clipped to the frame or handlebars, allowing hands-free testingIncludes 10 mm, 12 mm, 14 mm and 18 mm long reach adapters to test most...

Kibblewhite - GR-2770 - Reamer - 7 mmFeaturesThese reamers have been specifically designed for KPMI® Manganese Bronze and Cast Iron valve guidesAlso, once a reamer is used on Cast Iron, it is not advisable to then use it on a bronze guideDo not attempt...

Kibblewhite - GR-3780 - Reamer - .3780"FeaturesThese reamers have been specifically designed for KPMI® Manganese Bronze and Cast Iron valve guidesAlso, once a reamer is used on Cast Iron, it is not advisable to then use it on a bronze guideDo not attempt...

Kibblewhite - GR-3770 - Reamer - .3770"FeaturesThese reamers have been specifically designed for KPMI® Manganese Bronze and Cast Iron valve guidesAlso, once a reamer is used on Cast Iron, it is not advisable to then use it on a bronze guideDo not attempt...

Kibblewhite - GH-3125 - Ball Hones - Valve Guide - 5.16"FeaturesDurable enough to size C630 bronze and cast iron valve guide materialsMade in the U.S.A.SpecsWidth5/16''ApplicationValve GuideRiding StyleStreetUnitsEachMeasurement SystemSAEProduct NameBall...

Kibblewhite - GR-3100 - Reamer - .3100"FeaturesThese reamers have been specifically designed for KPMI® Manganese Bronze and Cast Iron valve guidesAlso, once a reamer is used on Cast Iron, it is not advisable to then use it on a bronze guideDo not attempt...

Kibblewhite - GR-3110 - Reamer - .3110"FeaturesThese reamers have been specifically designed for KPMI® Manganese Bronze and Cast Iron valve guidesAlso, once a reamer is used on Cast Iron, it is not advisable to then use it on a bronze guideDo not attempt...

Kibblewhite - GH-3750 - Ball Hones - Valve Guide - 3/8"FeaturesDurable enough to size C630 bronze and cast iron valve guide materialsMade in the U.S.A.SpecsRiding StyleStreetApplicationValve GuideProduct NameBall HonerUnitsEachWidth3/8''Measurement...

Kibblewhite - GH-2755 - Ball Hones - Valve Guide - 7 mmFeaturesDurable enough to size C630 bronze and cast iron valve guide materialsMade in the U.S.A.SpecsApplicationValve GuideWidth7.0 mmRiding StyleStreetProduct NameBall HonerMeasurement...

Lang Tools - 446 - Cylinder Sleeve Hold-DownFeaturesSpecialty nuts are used to hold down cylinder sleeves during serviceAllow motor to be turned over with heads offSpecsApplicationCylinderProduct NameNutTypeCylinder Sleeve HolderColor/FinishSilverUnits4...

Lang Tools - 437 - Crank Bearing Tool - Harley-Davidson®FeaturesDiameter of the bolt is turned slightly smaller than the actual crankshaft diameter, allowing the inner bearing races to be installed and removed without pressing them on or offAllows much...

Lang Tools - 6529 - Wrench - Rocker Box Cover - Reversible/Ratcheting - Harley Davidson®FeaturesComfortable, reversible, ratcheting, with an ergonomic rubber grip that will not scratchLow profile to allow clearance between frame and engineComes with a...

Lang Tools - 5530 - Wrench - Intake Manifold - Ratcheting/Reversible - Harley-Davidson®FeaturesFeatures reversible ratcheting action and an 1/4" ball-end Allen bit end for flexibility in tight areasTo install and remove intake manifold socket-head cap...

Lang Tools - 3497 - Plier Snap Ring Set - 6-PieceFeaturesIncludes most popular sizes in straight, offset and 90 Internal/external fixed-tip pliersPacked in blow-molded caseMade in the U.S.A.LANG 3497 - 6-Pc Fixed Tip Convertible Retaining Ring PliersLANG...

Lang Tools - 9636 - Rear Axle Nut WrenchFeaturesReversible ratcheting wrench used to install and remove 36 mm axle nutsLow profile wheel allows access to the nut without removal of the exhaust1/2"- square drive hole allows a torque wrench to be used when...

Jims - 727K - Valves - Compression ReleaseFeaturesSimply drill and tap (10 mm x 1.0 mm) each cylinder head and thread in the self-sealing release valvesGive your starter a hand by installing these in your high-compression, big-inch motorFits all Big Twin...

Hot Cams - CIK-001 - Installation KitFeaturesContains degree wheel, standard unit indicator, adjustable magnetic stand, and three positive stops (10 mm, 12 mm and 14 mm threads)Can be used to install and adjust timing of any camWooden carrying...

Fuel-Tool - MC800 - Gauge - Fuel Pressure - Magnetic - 360 FeaturesGauge attaches magnetically to machine's fuel tank to quickly check both Static (idling) and Load (under acceleration) fuel pressure readingsUsed to diagnose loss of power, poor fuel...

Fuel-Tool - MC400 - Rebuild Kit Installation Tool - Fuel Check ValveFeaturesMSDS Migration DataProvides for fast and easy professional installation of check valve O-ring or Rebuild kit without having to remove tank from the bikeThe industry's first and...

Helix - 350-3915 - Tester - Fuel - EthanolFeaturesMeasures the percentage of alcohol/ethanol contained in your fuelDoubles as a Phillips and standard screwdriverComes in a reusable storage tubeSpecsRiding StyleOff-RoadRiding...

Fuel-Tool - MC100 - Fuel Transfer System - Delphi Fuel InjectionFeaturesMSDS Migration DataTransfers up to one quart of fuel every 20 seconds; will not stall engine while in useSmall and compact size, stores anywhere; storage pouch includedSimple and...

Fuel-Tool - MC500 - Gauge - Fuel Pressure/Delphi Fuel Injection - 100 psiFeaturesMSDS Migration DataIncludes a solid brass adapter and release valve, steel housing (100 psi) gauge, stainless steel springs, Viton O-rings, O-ring lubricant and nylon...

Jims - 744 - Hardware Organizer - Top EndFeaturesSpecific stands for top end, transmission, cam chest, and primaryPart organizers for powertrain assembly, teardown and storageStands nest to save spaceMade in the U.S.A...

K&L Supply - 35-8434 - Magnetic Base - Flex ShaftFeaturesFlexible indicator mounting arm locks into place to make any job easyFeatures an easy-to-use on/off knobFor use with dial indicator gaugeSpecsApplicationDial IndicatorRiding...

K&L Supply - 35-8421 - Dial Indicator - Magnetic BaseFeaturesReads 1.0" in increments of .001"Gauge can be locked for a zero settingIncludes magnetic base stand that has an adjustable dial indicator mounting arm for a wide range of...

K&L Supply - 35-9016 - Tool Tire Bead StarterFeaturesEasy to use: Just mount tire to wheel, position bead starter, then cinch down with ratchet lever; add air until bead begins to engage, then slowly ease belt tension as more air is addedAll-in-one...

K&L Supply - 35-6770 - Dolly - Bike LiftFeaturesGives the proper leverage to pivot and shift the lift around to precisely where it's needed, whether a motorcycle is mounted on it or notIncrease the mobility of the motorcycle MC625R Air LiftSpecsRiding...

Jims - 935 - Inspection Cutter Tool - Oil FilterFeaturesUse to inspect oil filter for any damaging particles that may be trapped in filterLocks down filter for a clean cut around filter baseFits filters up to 5-1/2" diameterMade in the U.S.A...

Jims - 5504 - Tappet Position HolderFeaturesTappet locations are clearly referenced on the tool, which also serves to protect the tappets from damage when removed from the engineSafely stores anti-rotation pins and tappets for proper and accurate...

Feuling Parts - 9008 - Reamer Tool - Camplate/Oil Pump - Twin Cam/M8FeaturesTo use, lightly machine (clean) the camplate relief valve seat and re-seat the plunger valveBest used in conjunction with Feuling pressure test tool part# 9010 or 9006, but can...

Jims - 2240-11-4 - Adapter - Valve Guide - Insert - 7 mmFeaturesAdapters are supported by a stand that makes it easy to press valve guides in and outAdapters for working on 7 mm valve guidesMade in the U.S.A.SpecsProduct NameAdapterTypeValve Guide...

K&L Supply - 35-8621 - Stand - Wheel Truing/BalancingFeaturesWheels mount to adjustable center cones or ball bearings for trueing and static balancingAdjustable frame rails accommodate wide rims and wheelsBalances and trues all 14" to 21" motorcycle...