Tools

V-Twin - 2556-1T - Clutch Puller ToolDescriptionClutch puller tool. Fits:UL 1937-1940EL 1936-1940Additional Information OEM No.12749-36 UOM1 - EA ManufacturerV-Twin OriginImported 2025 Catalog Pages1287

V-Twin - 2398-9 - Stud Installer SetDescriptionStud installer set includes a 9 piece assortment of 1/4", 5/16", 3/8", and 7/16" coarse and fine thread tools.Sold as a set of 9. Fits:Custom application for 1/4", 5/16", 3/8",...

V-Twin - 2397-2 - 7/16 inch-20 and 7/16 inch-14 Stud Installation ToolsDescriptionHigh quality, hardened, black oxide finished stud installation set includes 7/16"-20 and 7/16"-14 tools, engraved for easy identification. Fits:Custom application for...

V-Twin - 2396-2 - 3/8 inch-16 and 3/8 inch-24 Stud Installation ToolsDescriptionHigh quality, hardened, black oxide finished stud installation set includes 3/8"-16 and 3/8"-24 tools, engraved for easy identification. Fits:Custom application for...

V-Twin - 2395-2 - 5/16 inch-18 and 5/16 inch-24 Stud Installation ToolsDescriptionHigh quality, hardened, black oxide finished stud installation set includes 5/16"-18 and 5/16"-24 tools, engraved for easy identification. Fits:Custom application for...

V-Twin - 2394-3 - 1/4 inch-20, 1/4 inch-28 and 1/4 inch-24 Stud Installation TDescriptionHigh quality, hardened, black oxide finished stud installation set includes 1/4"-20, 1/4"-28 and 1/4"-24 tools, engraved for easy identification. Fits:Custom...

V-Twin - 2317-1 - Socket WrenchDescriptionSocket wrench with a black oxide finish. Socket is used for easy removal and installation of stock 1-3/8" hex flat top fork tube plugs. Fits:All modelsAdditional Information UOM1 - EA ManufacturerColony ...

V-Twin - 2282-1 - 11/16 inch TapDescription11/16" threaded tap. Fits:All modelsAdditional Information UOM1 - EA ManufacturerColony OriginUSA 2025 Catalog Pages1297

V-Twin - 16-9725 - Tire Pressure and Temperature Monitor ToolDescriptionThe tire pressure and temperature monitor tool requires a pressure range of 10-70 PSI and a temperature range of -22  to 185  F. Fits:All modelsAdditional Information UOM1 - EA ...

V-Twin - 16-9636 - Rear Axle Nut Ratchet WrenchDescriptionThis rear axle nut ratchet wrench is for 36mm axle nut. Low profile design allows access to rear axle nut without removal of exhaust system. Fits:FLT 2002-2007Additional Information UOM1 - EA ...

V-Twin - 16-9016 - Tire Bead Starter ToolDescriptionThis simple to use tool is a safe way to start and seat beads on all tire sizes.The linked straps apply even seating pressure to tire beads without compressed air. Tool is portable for on the go use and...

V-Twin - 16-6532 - Lower Rocker Box Bolt WrenchDescriptionReversible Ratcheting Type Wrench features 7/16 socket type head for easy removal and installation of lower rocker box bolts on all TC-88 models. Fits:FLT 1999-2016FLST 1999-2017FXST 1999-2017FXD...

V-Twin - 16-6531 - Lower Rocker Box Bolt WrenchDescriptionReversible ratcheting type wrench features 7/16 socket type head for easy removal and installation of lower rocker box bolts on all Evolution models. Fits:FXST 1984-1998FLT 1984-1998FXD...

V-Twin - 16-5835 - Jims M8 Valve Spring Compression ToolDescriptionJims "on bike" valve spring compressor tool is for use on M8 models.For use when changing valve springs for performance upgrades, or simply replacing a leaking valve seal. This "on bike"...

V-Twin - 16-5832 - Jims M8 Balancer Bearing Remover ToolDescriptionJims M8 balancer bearing remover tool is for use on 2017-up FLT and 2018-up FXST models. Fits:FLT 2017-UPFXST 2018-UPAdditional Information UOM1 - EA ManufacturerJims OriginUSA 2025...

V-Twin - 16-5530 - Intake Manifold WrenchDescriptionReversible Ratcheting Type Wrench features a 1/4" ball end allen bit for easy installation and removal of intake manifold allen bolts. Fits:FLST 1990-2017FXST 1990-2017XL 1988-2006FXD 1993-2017FXR...

V-Twin - 16-3200 - Jims Piston Ring End Gap ToolDescriptionTool makes measuring ring end gap faster and more accurate.Jims pison ring end gap tool makes measuring ring end gap faster, more accurate and will eliminate guess work. The flanged design allows...

V-Twin - 16-2760 - Jims Engine Dipstick Socket AdapterDescriptionThis tool allows drivers and mechanics alike to quickly, and safely remove the engine oil level dipstick that lies precariously close to a scorching hot exhaust pipe.Features includes a...

V-Twin - 16-2759 - Jims Engine Dipstick SocketDescriptionThis tool protects your hand from the heat of the exhaust while checking the oil.This dipstick socket also assists the drivers with limited hand strength. Feature a 6/8" ratchet drive hole, 3/8"...

V-Twin - 16-2753 - Jims Flywheel Locking ToolDescriptionJims Twin Cam flyhweel locking and decommissioned tool locks the flywheel in place making service procedures easier.This tool is very visable and useful to designate a bike as decommissioned. The...

V-Twin - 16-2130 - Main Drive Gear Remover ToolDescriptionMain drive gear remover tool removes the main drive gear from the main bearing while in the transmission case.This eliminates the need of an arbor press and the risk of case damage. For use on all...

V-Twin - 16-1977 - Fork Stem Nut WrenchDescriptionFork stem nut wrench allows stem nut to be loosened and re-torqued to correct specifications without removal of radio package. Fits:FLHR 1994-UPFLHT 1996-UPAdditional Information UOM1 - EA ...

V-Twin - 16-1941 - Oil Filter WrenchDescriptionOil filter wrench features a slim 14 flute design to fit most oil filters, and 3/8" ratchet drive hole.Oil filter wrench allows more clearance for oil filter removal especially around oil coolers and crank...

V-Twin - 16-1906 - Jims Rear Axle Nut Torque Adapter ToolDescriptionJims rear axle nut torque adapter tool for all 2006-UP FL Touring models. Fits:FLT 2006-UPAdditional Information UOM1 - EA ManufacturerJims OriginUSA 2025 Catalog Pages1292

V-Twin - 16-1892 - Stop/Piston TDC ToolDescriptionTool is used for engine timing by locating the piston at TDC (Top Dead Center). Features a brass construction finish threaded shaft with a stopper which is inserted in the 12mm spark plug holes.Once the...

V-Twin - 16-1889 - Head Bolt Wrench Tool BlackDescriptionBlack head bolt wrench tool has an extended 3/18" drive to torque head bolts on Panheads, Shovelheads and Knuckleheads.Torque wrench and socket not included. Fits:FL 1941-1984EL 1936-1952Additional...

V-Twin - 16-1888 - Piston Pin Lock ToolDescriptionThis piston pin lock ring installer is spiral type for all models. Fits:FX 1971-1977XL 1957-1977FL 1952-1977Additional Information UOM1 - EA ManufacturerMotorshop OriginImported 2025 Catalog Pages860

V-Twin - 16-1887 - M8 Valve Guide ReamerDescriptionValve guide reamer is for use with M8 models with a diameter that measures .2357". Fits:FLT 2017-UPAdditional Information UOM1 - EA ManufacturerKibblewhite OriginUSA 2025 Catalog Pages1285

V-Twin - 16-1886 - Jims Tappet Adjuster ToolDescriptionJims tappet adjuster hand tool verifies proper adjustment on most hydraulic tappets for Evolution and Twin Cam models.Tappet adjustment made easy! After adjusting the tappet simply insert the tip of...

V-Twin - 16-1885 - Rod Straightening ToolDescriptionRod straightening tool is for use after checking with the rod alignment plate, as shown. Bend rod as required. Fits:FL 1941-1985EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - 16-1883 - Jims Transmission Countershaft Bearing ToolDescriptionJims bearing tool will install and remove the closed end countershaft bearing on 5 and 6 speed Big Twin transmissions without using a press or tapping with a transmission shaft.This...

V-Twin - 16-1882 - Jims Rocker Box Alignment Tool SetDescriptionJims rocker box alignment tool set for all Twin Cam engines. This tool set allows precise alignment of Twin Cam rocker boxes to avoid improper sealing surface issues and rocker arm...

V-Twin - 16-1863 - Jims Tappet Test Stand Tool AdapterDescriptionThis adapter is for the Jims tappet pump and test tool for use on Evolution style tappets. Fits:FXST 1984-1998FLT 1984-1998Additional Information UOM1 - EA ManufacturerJims OriginUSA ...

V-Twin - 16-1860 - 7mm Valve Guide Ream ToolDescription7mm valve guide ream tool. Fits:FLST 2005-2017XL 2004-UPFXD 2005-2017FLT 2005-2016FXST 2005-2017Additional Information UOM1 - EA ManufacturerJims OriginUSA 2025 Catalog Pages1285

V-Twin - 16-1858 - Jims Balancer Retainer ToolDescriptionUsed to hold the hydraulic tensioners in place when repairing Beta engines.Hydraulic tensioners are used to keep constant chain tension on the counter balancer system. Without the use of these...

V-Twin - 16-1852 - Shaft Turning ToolDescriptionShaft turning tool allows engine to be turned over by 1/2" ratchet or impact driver. Spline type. Fits:XL 1957-UPAdditional Information UOM1 - EA ManufacturerMotorshop OriginImported 2025 Catalog...

V-Twin - 16-1850 - Shaft Turning ToolDescriptionShaft turning tool allows engine to be turned over by 1/2" ratchet or impact driver. Spline type for TC models. Fits:FXD 1991-2005FX 1971-1984FLST 1986-2005FLT 1979-2005FL 1955-1984FXR 1982-2005FXST...

V-Twin - 16-1849 - Adapter ScrewDescriptionAdapter screws fits 1991-up XL Fits:Special application with clutch compressor tool on 1991-up XL.Additional Information OEM No.38515-91 UOM1 - EA ManufacturerMotorshop OriginImported 2025 Catalog Pages927 ...

V-Twin - 16-1848 - Rocker Arm Bushing and Roller Bearing PullerDescriptionThis rocker arm roller bearing puller Fits:All modelsAdditional Information OEM No.95760-57 UOM1 - EA ManufacturerJims OriginUSA 2025 Catalog Pages1285

V-Twin - 16-1847 - Shock Absorber Tool BoltDescriptionShock bolt is for shock absorber tool. Fits:Replacement application for shock absorber tool.Additional Information UOM1 - EA ManufacturerMotorshop OriginImported 2025 Catalog Pages1292 Tech...