1967

Drag Specialties - Rocker Box Cover fits '66-'84 Shovelhead Models - Chrome  This cover comes to you in a nice chrome finish. Features Includes both front and rear pieces Fitment 1984 Harley-Davidson Electra Glide Special...

Drag Specialties - Clutch Shell fits '70-'E84 Big Twin Chain-Drive Models  Sold each. Replaces OEM#37702-70A. Features Replacement clutch shell with starter ring gear Fitment 1984 Harley-Davidson Electra Glide Special...

LA Choppers Kage Fighter Handlebars Chrome Features High-strength steel tubing construction Accepts stock controls Designed for internal wiring Made in the U.S.A. 8 bolt billet aluminum clamp Multiple riser heights available 3-inch on-center...

Drag Specialties - Mini King and Queen Seat fits '58-'84 FL/​FLH, '66-'84 FX & '80-'84 FXWG Models The Drag Specialties Mini King and Queen seat provides a vintage look with a new and improved fit. It is molded from polyurethane foam and covered...

Biltwell - Tracker 1" Handlebars The Tracker bars look great on dirt-track inspired custom builds. They are available in your choice of a chrome or black electroplated finish in both smooth and slotted options. Please Note: The only Biltwell Handlebars...

Thrashin Supply - P-54 Extra Grip Front/Rear Footpegs Thrashin's P-54 Extra Grip Front/Rear Footpegs are 2.25" Wide Tapered Platform pegs designed with grip surfaces that have a slight radius for improved shifting and braking whilst maintaining the...

Deadbeat Customs Tracker High Handlebars - Red These tracker handlebars are made from .120" chromoly steel tubing and come in a bright red powdercoat finish. Dimpled for stock Harley Davidson controls (Externally Wired). Slotted for Throttle By Wire...

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Wild 1 Physco Street Fighter 12" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Nash - 1" Midget Gimp Handlebars - Fits '82-Up HD Models (Dimpled) Smaller Version of the Gimp Handlebars, available in 12" 14" and 16" heights, in chrome or black finish. Feature a 9.5" base for narrow glide front ends. Dimpled, drilled and knurled...

Sawicki Speed Shop - Billet End Cap Replacement Kit (Universal Fit) Sold each. Fitment Fits all pipes.

The Accutronix Custom Grips are a great final touch to your custom bike build. High-quality brass construction Dual cable design Sold in pairs Made in the U.S.A. Fitment: YearMakeModel 2016 - 2017 Harley-Davidson Breakout (EFI)...

Wild 1 Chubby Flatline 12" Handlebars Features: 1-1/4" diameter Drilled for internal wiring Chrome Made in USA Measurements: 12" TALL 24" WIDE FLAT 0" PULL BACK 0° WRIST ANGLE

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

S&S Cycle - Oil Pump Replacement Gasket Kit fits '36-'69 Big Twin Models Features: Made in the U.S.A. Fitment 1991 Harley-Davidson Dyna Sturgis FXDB - - 1990-1991 Harley-Davidson Low Rider Convertible...

Wild 1 - Chubby® Savage 1-¼" Handlebars - Black These handlebars from Wild 1 are 1-1/4" in diameter, they are also 1-1/4" at the clamp and will need to be ran with 1-1/4" risers, such as the ones offered by Wild 1. Features Handlebars are...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone...

James Gasket - Intake/Carburetor Gasket Kit fits '66-'84 Shovelhead, '79-'85 Sportster Models w/ Bendix/Keihin/​Tillotson (Butterfly Style) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

James Gasket - Intake Manifold Gasket Kit fits '66-'84 Shovelhead, '57-'78 Sportster Models w/ Bendix/​Keihin (Butterfly Style (OEM #27002-57)) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide) Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...

Jims - 2244 3/8" 35 mm Fork Nut Socket fits For Big Twin & Sportster Models Features: Used to remove and install top fork nuts on fork tubes Rubber protector inside socket Will clear most handlebars Made in the U.S.A...

Jims - 1110 0.105" Camshaft Pinon Gauge Pins fits '54-'89 Big Twin Models Features: Use to check pinion gear for pitch diameters Check service manual for sizing chart Made in the U.S.A. Fitment 1989 Harley-Davidson Electra Glide Ultra...

Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy operation Made in the U.S.A...

Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as install cups in the frame This tool pulls the races...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...

Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to early '84 idler gear bushing) Designed to line-ream...

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and installs steering head bearing race on 84-16 Big Twin...

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing Made in the U.S.A...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press cases apart and break sealant bond Some case pressing will...

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal Made in the U.S.A...