1986

TC Bros - 11.5" Center Hub Mount Rear Floating Brake Rotor fits '84-'23 Harley Models TC Bros.' Center Hub Mount Rear Floating Brake rotor has a full-floating design which holds true to the utmost rotor-caliper alignment. It decreases heat transfer from...

Drag Specialties Transmission Mounting Plate for Softail 1986-1999 Replaces Harley Davidson part number 47698-86B Fitment: YearMakeModel 1990 - 1999 Harley-Davidson Fat Boy - FLSTF 1986 - 1990 Harley-Davidson Heritage -...

Deadbeat Customs Tracker High Handlebars - Red These tracker handlebars are made from .120" chromoly steel tubing and come in a bright red powdercoat finish. Dimpled for stock Harley Davidson controls (Externally Wired). Slotted for Throttle By Wire...

Drag Specialties Harley Davidson Side Plates These side plates are an easy bolt on design and are available in all different fitments. Features Side plates are a bolt-on design - no drilling required Chrome Finish Made in the U.S.A...

HardDrive - Arrow Head Custom Die Cast Mirror - Black   The HardDrive Custom Die Cast Mirrors are small, but will still give you the visability to see what is coming up behind you. Sold in Pairs

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Wild 1 Physco Street Fighter 12" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

TC Bros - 11.5" Center Hub Mount Front Floating Brake Rotor fits '84-'13 Harley Models TC Bros.' Center Hub Mount Front Floating Brake rotor has a full-floating design which holds true to the utmost rotor-caliper alignment. It decreases heat transfer...

Nash - 1" Midget Gimp Handlebars - Fits '82-Up HD Models (Dimpled) Smaller Version of the Gimp Handlebars, available in 12" 14" and 16" heights, in chrome or black finish. Feature a 9.5" base for narrow glide front ends. Dimpled, drilled and knurled...

V-Twin - Chrome Petcock W/ Nut and 90° Left Outlet fits '75-'94 Big Twin & '75-'95 Sportster Models This petcock is designed to be used with stock gas tanks or custom tanks with a 22mm outside thread. The shape of the petcock is built for a...

Sawicki Speed Shop - Billet End Cap Replacement Kit (Universal Fit) Sold each. Fitment Fits all pipes.

HardDrive - Cafe Style Bar End Mirrors Features: Chrome adjustable hardware Available in black or chrome finish Fit 1" diameter handlebars The internal bar-end adapter is easy to install Mirror is 3" diameter Sold in pairs (LH and RH set)

HardDrive - Vintage Style Custom Die Cast Mirror - Chrome These Die Cast Mirrors are small, but will still give you the visibility to see what is coming up behind you. Features: Sold in Pairs Chrome Finish  

Joker Machine Points Cover fits '70-'99 Big Twin Finned, Black This Joker Machine finned points cover is made from durable aluminum. It includes all necessary hardware making the mounting process super easy. Add a subtle custom look to your Harley...

Jagg - Vertical Frame Mount 6-Row Oil Cooler System Jagg's Vertical Frame Mount 6-Row Oil Cooler System is a must-have performance part for Harley owners. This cooler mounts to the left frame down-tube, spaced away from the frame to deliver airflow to...

Saddlemen- Profiler LS Seat fits '84-'99 FXST/FLST This Profiler seat maintains the classic lattice stitch (LS) design while adopting a more modern appearance. Drivers will feel comfortable and proud knowing their portion of the seat is made of...

The Accutronix Custom Grips are a great final touch to your custom bike build. High-quality brass construction Dual cable design Sold in pairs Made in the U.S.A. Fitment: YearMakeModel 2016 - 2017 Harley-Davidson Breakout (EFI)...

Wild 1 Chubby Flatline 12" Handlebars Features: 1-1/4" diameter Drilled for internal wiring Chrome Made in USA Measurements: 12" TALL 24" WIDE FLAT 0" PULL BACK 0° WRIST ANGLE

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

V-Twin - 41mm Narrow Tree Kit fits '84-'99 FXST Models 41mm narrow glide kit features an upper and lower triple tree. Stock rake in alloy finish. 1" stem, 3/4" axle and stem nut included. Top tree riser mount hole measure 3-1/2" center to center...

S&S Cycle - Oil Pump Replacement Gasket Kit fits '36-'69 Big Twin Models Features: Made in the U.S.A. Fitment 1991 Harley-Davidson Dyna Sturgis FXDB - - 1990-1991 Harley-Davidson Low Rider Convertible...

Colony - 8703-2 Relief Valve Plug Kit fits '81-'84 Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

V-Twin - Axle Kit Acorn Style fits '84-'99 FXST, '86-'99 FLST Models Custom rear axle acorn style has a 12-3/8" bearing surface length Fitment: FXST 1984-1999 FLST 1986-1999 Measurements: Bearing Surface: 12-3/8" Overall Length:...

V-Twin - Right and Left Mid Control Kit fits '86 '17 FXST/FLST Models Natural stainless steel construction mid control kit for Softail models. Bolt on installation. Kit includes right brake control assembly and left shifter control assembly. Full...

V-Twin - Mid Control Brake Kit fits '86-'17 FXST/FLST Models Softail mid control brake kit includes pedal mount plate which attaches to FX style transmission chrome brake pedal, black master cylinder and plunger. Brake pedal mount plate is fastened...

V-Twin - Mid Control Shifter Kit fits '86-'17 FXST/FLST Models Softail mid control shifter kit includes the primary inspection plate with bushing, cross linkage, arm linkage, inner shifter, foot shifter lever and shifter peg. Components are...

V-Twin - 3/8 NPT-22MM Petcock Nut fits '86-'17 FLST/FXST, '75-'95 Sportster Models (OEM #622-83N) Brass 1/4 NPT-22MM petcock nut only Fitment: FX 1975-1984 FL 1975-1984 FXR 1982-1994 FXD 1991-2017 XL 1975-1995 FLST 1986-2017 FXST 1984-2017

V-Twin - Mid Control Shifter Shaft fits '89-Up FXST/FLST, '81-Up Sportster Models Softail mid control shifter shaft is the cross over type, used to route over inner primary to connect to shifter linkage. For mid shifter control. Shaft has splined...

V-Twin - Brake Pedal Shaft fits '86-'17 FXST/FLST Models Softail foot brake pedal shaft with splined end. For mid control brake and pedal kit. Pedal shaft is splined to accept footpeg mount. Drilled and tapped for 3/8" x 16 thread Fitment: FXST...

V-Twin - AEE Foot Shifter Kit fits '79-'84 FX/FL, '86-'99 FXST/FLST Models AEE foot shifter kit for 1 up 3 down shifting. Includes threaded rod with 5/16"x24 threads on each end. Shorty control set, pedal requires less reach than...

V-Twin - Chrome Grate Brake Small Pedal Pad fits '84-'17 FXST, '18-Up FXBRS/FXBR/FLSB Models Grate style brake pedal pad is the small type featuring a chrome plated finish. Surface has raised knubs for better grip and self-cleaning Fitment: FXBRS...

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve port on oil pumps. Used as an oil pressure indicator...

Colony - Fork Drain Screws fits '84-'99 FXST/​FLST, '84-'98 FLT/​FLHT/​FLHR/​FLTR, '84-'86 FXWG Models (OEM #45858-77) Features: Two button head Allen screws with two copper compression washers Made in the U.S.A...

Colony - Motor Case Kit fits '79-'95 Big Twin Models - Cadmium Features: Contain all necessary hardware to bolt together stock motor cases Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - Head Bolt Set fits '86-'91 Sportster Models (OEM #16478-85A, 16480-85A) Features: 12-point replacement headbolts Made in the U.S.A. Fitment 1992 Harley-Davidson Dyna Daytona FXDB - - 1991 Harley-Davidson Dyna Sturgis...

Drag Specialties - Oil Pressure Gauge Mount fits 80” Evolution Engines (Except FLT/HT/HS/HR/​Ultra) Features: Chrome mount attaches at the crankcase and rocker box mounting bolt, allowing an unobstructed view of your oil pressure Stock oil...

Colony - Stem Nut and Lock Washer Kit fits '99-'13 Touring, '00-'10 Softail & '06-'17 Dyna Models (OEM #45717-63, 45718-60) Features: Precision-machined stock stem nut and stamped steel lock washer For models without steering damper Made in the...

Colony - Cam Cover Acorn Hardware Kit fits '70-'99 Big Twin Models (Except Twin Cam) Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - 8707-6 Oil Pump Plug Kit fits '81-'84 Big Twin Models Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...