Bagger Engine

Roland Sands Design Clarity Cam Cover - fits '01-'17 Twin Cam w/o Cam Position Sensor ( exc. '01-'08 FL) Features Allows for viewing of the internal moving engine components CNC-machined from billet aluminum Hardware included Contrast Cut™...

Drag Specialties - Swingarm Isolator Mount fits '86-'08 Touring & '99-'00 FXR Models (Repl. OEM #47564-86B) This mount meets or exceeds OEM specifications. Sold each.  NOTE: Will fit '85 models that have been updated with OEM swingarm pivot...

Drag Specialties - Iso-Mount™ Front Motor Mount fits '09-'16 Touring Models (Repl. OEM #16207-09) This is a urethane motor mount specifically built to last longer and out-dampen the OEM part. Sold separately...

V-Twin - Black Nose Cone Cam Cover fits '73-'93 Big Twin Models OEM #25268-84A V-Twin's Nose Cone Cam Cover is designed to fit Big Twin Models. The bushings are installed and a seal is included. NOTE: This cover comes with mounting screws, a gasket and...

Drag Specialties - Iso-Mount™ Rear Motor Mount fits '09-'16 Touring Models (Repl. OEM #47584-09) This is a urethane motor mount specifically built to last longer and out-dampen the OEM part. Sold separately...

V-Twin - Rocker Box Set fits '99-'17 Twin Cam Models This set comes with two upper covers and two lower housings. Available in your choice of a black or chrome finish. Fitment FLT 1999-2016FLST 1999-2017FXST 1999-2017FXD 1999-2017

Cometic - Breather Assembly Gasket Kit fits '03-'17 Twin Cam Models (Sold Each) This kit comes with all necessary gaskets/seals for a full breather rebuild assembly. Please Note: Breather assembly rebuild kit includes two metal breather plates, two...

Comp Cams Velva Ride Motor Mount Stabilizers Fits Harley Davidson FLT and Dyna Models Features: Body contains a plunger encased in a specially formulated urethane to absorb vibration Sold each or in pairs Made in the U.S.A...

Drag Specialties - Cam Cover fits '93-'99 Evolution Big Twin Models The bushings on this cam cover are installed, pinned and reamed to OEM specifications. Available in your choice of a satin black or chrome finish. Features Die-cast aluminum...

Colony - Ignition Cover Timer Stud Kit fits '80-'99 Big Twin, '80-'85 Sportster Models (OEM #32601-80, 32606-82) Features: Reproduction of original ignition timer cover studs Made in the U.S.A. Fitment 2002-2003 Harley-Davidson 883...

Drag Specialties - Spherical Radius Points Cover fits '99-'17 Twin Cam Models Available in your choice of a chrome, flat black or wrinkle black finish. Features Beautiful radiused points cover matches our brake caliper inserts and fork tube cap...

EMD - Rocker Covers - fits '17-Up M8  Dress up your M8 with a Rocker Cover by EMD. Features: Available in Classic Ribbed or Shovel design Available in Black or Raw finish Gaskets sold separately Fitment: 2019 - FXDR Softail Power...

V-Twin - Black Nose Cone Gear Cover fits '93-'99 Big Twin Models V-Twin's Nose Cone Gear Cover is designed to fit Big Twin Models. The bushings are installed and a seal is included. Fitment FXD 1993-1999FXST 1993-1999FXR 1993-1994FLST 1993-1999FLT...

Colony - 2709-24 Knurled Motor Mount Bolt Kit fits '09-'16 FLT Model (OEM #4313, 4688) Features: Individual bolt and nut sets for specific applications Bolt kits include allen screws, nuts and washers Replacement Part for...

Drag Specialties - Cam Cover fits '73-'92 Big Twin Models The bushings on this cam cover are installed, pinned and reamed to OEM specifications. Available in your choice of a satin black or chrome finish. Features Die-cast aluminum...

Colony - 9002-4 Cap Headbolt Cover fits '86-'98 FXST/FLT/FLST, '91-'98 FXD, 86-94 FXR Models - Chrome Chrome cap headbolt cover. Fitment: FXST 1986-1998 FLT 1986-1998 FXD 1991-1998 FXR 1986-1994 FLST 1986-1998

Colony - Oil Pump Plug Kit fits Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Drag Specialties - Harley Touring Clutch Master Cylinder Cover (OEM #367001-30, OEM #367000-94) - Black Features: Constructed from 6061 aluminum Includes gasket and mounting screws

EMD - Ribbed Cam Cover - fits '17-Up M8  These Ribbed EMD covers are the real alternative to the cold, rigid and old fashioned “Billet” style. Features: Manufactured in die cast aluminum, CNC milled gasket surface OEM...

Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in...

Jims - 988 Valve Spring Compressor fits '05-'17 Twin Cam (Except SE Models), '04-'22 Sportster (Except RH Sportster) & Buell Models (Except 1125R) Features: Used to remove and replace valve and new-style conical valve spring Requires use of JIMS...

Jims - 938 7mm Valve Guide Installer fits '05-'17 Twin Cam, '04-'20 Sportster & '04-'09 Buell Models (Except 1125CR) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve...

Jims - 5808 Valve Spring Compression Collar Tool fits '17-'21 M-Eight Models Features: Valve spring collar allows existing compressor to remove smaller valves on M8 engines For use with JIMS® Valve Spring Compressor Tool (PART# DS-196013) Made...

Jims - 5833 Ball Bearing Installation Tool fits '17-'20 Softail & Touring Models Features: All Milwaukee-Eight® (M8) engines incorporate balancers to reduce vibration Designed to precisely install these bearings in the proper location for...

Jims - 5835 Valve Spring Compressor Tool fits '17-'21 M-Eight Models Features: Once the cylinder is filled with compressed air, the technician can easily rotate the tool and compress the top collar of the valve spring exposing the keepers to remove...

Jims - 991 Case Splitting Tool fits '18-'21 M8 Softail & Touring Models Features: In order to perform any type of lower end service or performance work, it is necessary to split the crankcase into halves Simply install the tool on the primary...

Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides) Features: Adapters are supported by a stand that makes it easy to press valve guides in and out A special guide...

Jims - 1110 0.105" Camshaft Pinon Gauge Pins fits '54-'89 Big Twin Models Features: Use to check pinion gear for pitch diameters Check service manual for sizing chart Made in the U.S.A. Fitment 1989 Harley-Davidson Electra Glide Ultra...

Jims - 1111 0.108" Camshaft Pinion Gauge Pins fits '90-'99 Big Twin Evolution Models Features: Use to check pinion gear for pitch diameters Check service manual for sizing chart Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - 1034 Sprocket Shaft Holder fits '55-'99 Big Twin & '99-'06 Twin Cam (Except '06 Dyna) Features: Used to hold flywheel assembly in vise, with or without left case attached Made in the U.S.A...

Jims - 95760-XL Inner Cam Bearing Removal Tool fits '57-'90 Sportster Models Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models Features: Removes oil screen without removing exhaust Used to remove the tappet oil screen plug Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1010 Evolution Rod Alignment Tool for 0.791” Wrist Pin Features: Use to check rod straightness without removing the rods from the cases Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...

Jims - 1030-TS Crank Pin Flywheel Socket fits 'L83-'99 Big Twin Models (OEM #23969-83) Features: Machined for 100% nut-to-socket and drive-end contact Eliminate nut rounding and risk of injury Made in the U.S.A...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...