Bagger Parts

Drag Specialties - Clutch Lever Bracket fits '82-'95 Big Twin & '82-'85 Sportster Models (OEM #38608-82B) Features: Made of die-cast aluminum Fitment 1995 Harley-Davidson Dyna Convertible...

Namz - Throttle-By-Wire Extension Harness/Switch fits '21-'24 Harley Davidson Models Features Throttle-by-wire extension kit Fitment 2024 Harley-Davidson Road Glide Police FLTRXP 2024 Harley-Davidson Road Glide Limited...

Drag Specialties - 34-1/2" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an...

Drag Specialties - 72-11/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings,...

Drag Specialties - 74-11/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel...

Drag Specialties - 70-7/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin/ '86-'13 Sportster Models (Except '06 Dyna Glide) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel...

Drag Specialties - 80" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) W/ 26" Clutch Adjuster - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings,...

Dynatek - PC-Programmable Single-Fire Ignition and Coil Kit fits '91-'95 Softail & Dyna, '91-E'94 Touring, '84-'94 FXR & '90-'93 Sportster Models (7-Pin) Dynatek's PC-Programmable Single-Fire Ignition and Coil Kit comes with a Dyna 2000 ignition...

Accutronix - 12" Bandit Riser Kit W/O Gauge Mount Adapter (1-1/8" Clamping Area) Available in your choice of a black or chrome finish.  The clamping area on these risers is 1-1/8" | You will need handlebars with a 1-1/8" clamping area to run these...

Joker Machine Black Fork Tube Turn Signal Clamps for Harley Models These low profile fork tube turn signals are made from some of the best material- 6061 billet aluminum. Easily mounted with the included hardware and available in a black finish. Clean...

Drag Specialties - Front Brake Stoplight Switch fits '86-'95 Sportster Models (OEM #71590-92, 71590-92L) Features: OEM-replacement switch kits Meet or exceed OEM specifications Fit U.S.A. and international models  

Drag Specialties - 32-1/2" Black Vinyl Throttle Cable (Repl. OEM #56324-81/ 56324-81A/ 56324-81B/ 56324-81C) Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for...

Drag Specialties - 52" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an...

Drag Specialties - 58" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an...

Drag Specialties - 41-1/2" Black Vinyl Idle Cable '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer...

Drag Specialties - 34-1/2"  Black Vinyl Idle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and...

Drag Specialties - 53-5/16" Black Vinyl High-Efficiency Clutch Cable (Repl. OEM #38599-83A) Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth operation High-performance...

Drag Specialties - Crankcase Breather Kit fits '93-'17 Big Twin Models (Exc. '17 FXDLS, '16-'17 Softails & '08-'17 Dressers) Features Comes with breather bolts, washers and hardware Works with most aftermarket air cleaners One-piece chrome tube...

Wild 1 Chubby Flatline 12" Handlebars Features: 1-1/4" diameter Drilled for internal wiring Chrome Made in USA Measurements: 12" TALL 24" WIDE FLAT 0" PULL BACK 0° WRIST ANGLE

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...

Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 2002 Harley-Davidson Softail Fat Boy EFI...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...

Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models Features: Removes oil screen without removing exhaust Used to remove the tappet oil screen plug Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor cases Made in the U.S.A...

Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking...

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter With Nut fits '86-'22 Sportster (Except RH Sportster), 09-12 XR1200/X Models (OEM #63806-83, 63796-77A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed...

S&S Cycle - Billet Oil Pump Kit fits '92-'99 Evolution Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and...

Belt Drives Ltd. - BDLPCP-0007 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '90-'97 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive plates...

Colony - 8703-2 Relief Valve Plug Kit fits '81-'84 Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve port on oil pumps. Used as an oil pressure indicator...

Drag Specialties - Front Master Cylinder Repair Kit fits '82-'85 Big Twin, '82-'E85 Sportster, 3/4” bore (OEM #45042-82, 45063-82) Features: Meet or exceed OEM specifications Fitment 1985 Harley-Davidson Low Glide Custom...

Colony - Head Bolt Set fits '86-'91 Sportster Models (OEM #16478-85A, 16480-85A) Features: 12-point replacement headbolts Made in the U.S.A. Fitment 1992 Harley-Davidson Dyna Daytona FXDB - - 1991 Harley-Davidson Dyna Sturgis...

Drag Specialties - Oil Pressure Gauge Mount fits 80” Evolution Engines (Except FLT/HT/HS/HR/​Ultra) Features: Chrome mount attaches at the crankcase and rocker box mounting bolt, allowing an unobstructed view of your oil pressure Stock oil...

Colony - 8707-6 Oil Pump Plug Kit fits '81-'84 Big Twin Models Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...