V-Twin Manufacturing

V-Twin - OKO 22mm Rotary 90° Brass Petcock fits Custom Application Brass OKO rotary 90° petcock with 22mm National Pipe Thread. Our rotary petcock design first offered in 2013...

V-Twin - Tro-Cy Brass Petcock 3/8" NPT Solid machined natural brass, with 3/8" NPT thread and "full bore" 3/8" hose end. For all tanks with 3/8" NPT bungs. Note: 1970's original design by...

V-Twin - Chrome Dual Rectangular Headlamp Kit fits Custom Application Dual rectangular headlamp kit includes a raw bracket and 2 chrome 12 volt lamps. For pre-1988 35mm and 41mm narrow glide...

V-Twin - Hap Jones Peanut 2.0 Gallon Gas Tank Hap Jones 2.0 gallon gas tank is the hi-tunnel type with a die cast Chopper bayonet style gas cap. Gas tank accepts 1/4 inch petcocks.

V-Twin - Purple Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Green Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Blue Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Red Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original...

V-Twin - Bobber Hand Control Kit fits 1" Handlebars - Chrome Bobber hand control kit features a chrome finish. Kit includes the clutch and brake, for use with 1" handlebars. Master cylinder is...

V-Twin - Shorty Style Brass Riser Set fits 1" Handlebars Steel shorty style 2" riser set has a 1/2"-13 thread and brass finish.Set is cast solid. May have pits and marks from the hand casting...

V-Twin - Black Vinyl Solo Seat The V-Twin Black Vinyl Solo Seat features a metal base plate that comes with studs for mounting springs and nose brackets. The space between the studs measures 3.137"...

V-Twin - Universal On-Off-On Ignition Key Switch V-Twin's Universal ignition key switch has "on-off-on" positions. It comes with a mounting ring and two keys with no prongs in the back. The switch...

V-Twin - Chrome Round Headlamp V-Twin's chrome round headlamp features a 60/55 watt H4 bulb with a visor and grooves. It also features buffalo style housing! It comes with an insulator to cover wire...

V-Twin - Old School Throttle - Copper This old school style throttle comes to you in a bright copper finish. Fitment Custom application

V-Twin - Hand Lever Set (Custom Application) This old school hand lever set includes the pin and is available in your choice of a chrome or black finish. Fitment Custom application

V-Twin - Handlebar Master Cylinder (Custom Application) This old-school style handlebar master cylinder is 9/16" bore for single caliper use and is available in your choice of a black or chrome...

V-Twin Vintage Handlebar Clutch Handle Assembly - Black Vintage clutch handle assembly features a black finish. Fit: Custom application

V-Twin Replica XR 750 2 Gallon Gas Tank for Custom Applications Replica gas tank features the classic XR 750 design with steel construction. The petcock is on the left side. Tank accepts 1983-up...

V-Twin Replica XR 750 2 Gallon Gas Tank for Harley XL 2007-Up Replica gas tank features the classic XR 750 design with steel construction. Specific to EFI models and also accepts bung style...

V-Twin Replica XR 750 2 Gallon Gas Tank for Harley XL 2004-2006 Replica gas tank features the classic XR 750 design with steel construction. The petcock is on the left side. Accepts bung style...

V-Twin Replica XR 750 2 Gallon Gas Tank for Harley XL 1957-1978 Replica 2 gallon gas tank features the classic XR 750 design with steel construction. The petcock is on the left side. Accepts bung...

V-Twin Replica XR 750 2 Gallon Gas Tank for Harley XL 1982-2003 Replica gas tank features the classic XR 750 design with steel construction. The petcock is on the right side. Accepts bung style...

V-Twin Roadster 3.5gal Gas Tank for Harley XL 1982-2003 Recommended chrome petcock available in the related products sections below! Description: Replica gas tank has a left side petcock location...

V-Twin Mini Sportster Gas Tank - 1.6 Gallons Mini Sportster Gas Tank by V-Twin Manufacturing has a fuel capacity of 1.6 gal. This tank comes in a raw steel finish, perfect for any paint job. Offset...

V-Twin Solo Seat Hinge Kit with Hair Pin Springs The V-Twin Solo Seat Hinge Kit with Hair Pin Springs is made from tough material, which means it'll last. V-Twin is known for producing high quality...

V-Twin - Old School Chopper/ Bobber Polished Hand Lever Assembly 9/16" Bore Master Cylinder This old school polished hand lever assembly fits 1" handlebars and includes clutch and brake lever/perch...

V-twin large, thin, tuck and roll style solo seat features black vinyl covering on a steel base plate. Measurements Length: 13" Width: 14" Thickness: 6 cm  Fits: Custom application

V-twin large thick style tuck and roll style solo seat features black vinyl covering on a steel base plate. Length: 13" Width: 14" Thickness: 8 cm  Fits: Custom application

V-twin black vinyl solo seat features a metal base-plate which includes studs for mounting springs and nose brackets. Order mount kits and nose T bracket separately. The two spring studs under the...

This V-twin small, thin style tuck and roll  solo seat features black vinyl covering on a steel base plate. Length: 12-1/2" Width: 10" Thickness: 6 cm  Fits:Custom application

V-Twin - Black/ Copper 5-3/4" Bottom Mount Headlight This is a Bates style mount headlamp with traditional glass composite beam. Features: 5-3/4" headlamp bottom mount and H-4 bulb black...

V-Twin - Invader Grilled Tail Light Assembly This Invader Grilled tail lamp has a red lens and chromed housing. Dimensions: Center to center of bracket holes 4"-3/8 4" wide 5"...

VT No: 25-2253 Cast 4" dog bone riser set solid brass construction with polished finish. Top and bottom clamps are for 1" bars. Set of two. Order pinch bolts and acorn nuts separately. Solid brass...

V-Twin Mini Seat Shock Dual Mount This seat shock mount kit should be used with dual mini shocks. Kit includes 1 seat bracket, 2 lower brackets, 4 socket cap bolts, 4 lock washers, 4 flexloc nuts,...

V-Twin Mini Seat Mounting Shock 5" This V-Twin mini mounting shock is 5" long with exposed spring. Fits: Custom application

V-Twin Chopper Style Gas Tank 2.5 Gallon - Screw-In Style Cap This V-Twin chopper style gas tank has a 2.5 gallon capacity and features a screw-in style forward and high gas cap opening. The front...

V-Twin Prism Style Gas Tank 2.2 Gallon This V-Twin Prism gas tank has a 9/16"-18 left side petcock opening and a fuel capacity of 2.2 gallons. It features four bolt mounting with a strap type...

V-Twin Saga Gas Tank 3 Gallon - Bung Style Features: right side petcock opening. dished teardrop pop out sides fuel capacity of 3.0 gallons. uses a bung style cap which is not included. End...

V-Twin Fat Bob Steel Rear Fender - Right Side Chain Relief Bobbed rear fender for rigid models has a raw finish with a right side relief for the chain (right side of the bike while on the bike...

V-Twin Peanut Gas Tank 2.0 Gallon - Single Bayonet Style Cap Gas tank has a fuel capacity of 2.0 gallons. Tank is a single cap design with front and rear saddle style brackets to fit 1-1/2" frame...